FreeCalypso > hg > freecalypso-schem2
changeset 79:cf39d9352394
R407 intnoconn: use different terminal numbering on further thought
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 05 Dec 2021 03:49:14 +0000 |
| parents | 2dc128ba1659 |
| children | ebdbf6e08d2b |
| files | venus/doc/Charging-circuit venus/src/pinouts/resistor_with_sense.pinout |
| diffstat | 2 files changed, 7 insertions(+), 7 deletions(-) [+] |
line wrap: on
line diff
--- a/venus/doc/Charging-circuit Sun Dec 05 03:38:33 2021 +0000 +++ b/venus/doc/Charging-circuit Sun Dec 05 03:49:14 2021 +0000 @@ -34,15 +34,15 @@ will have 4 terminals rather than 2, with terminal numbers assigned as follows: Pin 1 = resistor side 1, surface layer -Pin 2 = resistor side 1, inner layer -Pin 3 = resistor side 2, surface layer +Pin 2 = resistor side 2, surface layer +Pin 3 = resistor side 1, inner layer Pin 4 = resistor side 2, inner layer The idea is to include in-pad microvias going one layer down inside the -subcircuit, and put terminals 2 and 4 on the inner layer. Terminals 1 & 2 will -form one intnoconn group, and terminals 3 & 4 will form the other intnoconn +subcircuit, and put terminals 3 and 4 on the inner layer. Terminals 1 & 3 will +form one intnoconn group, and terminals 2 & 4 will form the other intnoconn group. Surface traces carrying the charging current will connect to terminals -1 and 3, whereas sensing nets VCCS and VBATS will connect to terminals 2 and 4 +1 and 2, whereas sensing nets VCCS and VBATS will connect to terminals 3 and 4 on the inner layer. Our current ueda source implements this idea at the netlist level; creation of