LCD for handset and 3D printing help needed
Pičugins Arsenijs
crimier at yandex.ru
Fri Jun 8 04:15:59 UTC 2018
This spacer looks like it could be lasercut cheaply. What's the thickness of the spacer?
08.06.2018, 07:00, "Serg l" <serg at tvman.us>:
> Hi Mychaela,
>
> So far so good. I think it fits well enough for prototyping purposes. I
> didn't need to do any major adjustments, just removed two extra pits and
> increased diameter of holes to 1.3 mm
>
> Here are some pictures https://photos.app.goo.gl/JnEG1PDttqF2g0uz2
>
> And STL file
> https://drive.google.com/open?id=1-4xOKPFfhbvObmyy3zsuw-oyksh64_Af
>
> With such small nozzle it takes about 10 minutes to make this part, I think
> it can go faster, but I used very safe settings, still have lots of room
> for improvement.
>
> I made two runs and results look repeatable.
>
> How many do you need for now?
>
> -Serg
>
> On Tue, Jun 5, 2018 at 6:37 PM, Mychaela Falconia <
> mychaela.falconia at gmail.com> wrote:
>
>> Hi Serg!
>>
>> > I ran two samples, one with 0.4 nozzle, on the right and another 0.2
>> > nozzle, on the left.
>> > [...]
>> > Overall it looks okay, corners hold reasonable tension without breaking.
>>
>> I just sent one of my Startek LCD samples out your way, the Post
>> Office says you should receive it around this Friday. When you
>> receive the LCD, then we'll know for real how well this spacer fits.
>>
>> TIA,
>> Mychaela
>> _______________________________________________
>> Community mailing list
>> Community at freecalypso.org
>> https://www.freecalypso.org/mailman/listinfo/community
>
> _______________________________________________
> Community mailing list
> Community at freecalypso.org
> https://www.freecalypso.org/mailman/listinfo/community
More information about the Community
mailing list