FCDEV3B bring-up status

[Serg l]

BTW, I created Slackware 13.37 build system and it produced binary
identical Magnetite image to what Mychaela sent to me earlier. If anybody
wants a VMWare Player image, just let me know and I will make a copy.

On Wed, May 3, 2017 at 12:24 AM, Serg l <serg at tvman.us> wrote:

> I'm pretty sure that I saved it with me 102 and me 103, or at least I
> issued commands. I used gta02 load agent for x-ram boot, don't really see
> how it may affect ffc. The only explanation is that I done something stupid
> like misconfig or fatfingered something.
>
>
> It booted fine in mode 1, and sure thing it was rebooting without
> disabling sleep mode, even being connected to 5W linear PSU with highly
> stable 3.3V output
>
> I will check out new ffs.
>
> On Tue, May 2, 2017 at 11:48 PM, Mychaela Falconia <
> mychaela.falconia at gmail.com> wrote:
>
>> Hi Serg,
>>
>> > Another report. I flashed the image built by Mychaela, booted from it
>> and
>> > re-entered VCXO calibration values into FFS via tmsh.
>>
>> Re-entered via fc-tmsh?  Why were they not already in the non-volatile
>> FFS?  Perhaps you forgot to save them in the flash with me 102 and
>> me 103 commands the first time?  If so, it would surely explain why
>> you were previously unable to lock onto a cell...
>>
>> > The MS registered with the network in one shot without any problems.
>> > I was able to make and receive calls and SMS. I concluded this test by a
>> > shot of whiskey in order to celebrate this milestone of the project.
>>
>> Yay!
>>
>> By the way, is your board booting fine from flash in mode 1, or did you
>> have to use the flash boot mode 0 workaround?
>>
>> > The next step would be to try Citrine with the same FFS content.
>>
>> See the latest commit I just pushed into freecalypso-citrine, adding
>> feature fcfam-ffs.  It has the same end effect as feature aftermarket-ffs,
>> but is arguably cleaner when the hardware target is our own rather than
>> aftermarket.
>>
>> M~
>> _______________________________________________
>> Community mailing list
>> Community at freecalypso.org
>> https://www.freecalypso.org/mailman/listinfo/community
>>
>
>