| Sun, 17 Nov 2013 05:53:10 +0000 |
Michael Spacefalcon |
abb.c compiles!
|
| Sun, 17 Nov 2013 05:10:06 +0000 |
Michael Spacefalcon |
tpudrv*.h headers imported
|
| Sun, 17 Nov 2013 04:59:55 +0000 |
Michael Spacefalcon |
l1_rf<N>.h headers preened
|
| Sun, 17 Nov 2013 04:50:45 +0000 |
Michael Spacefalcon |
more L1 header files brought in
|
| Sat, 16 Nov 2013 20:55:06 +0000 |
Michael Spacefalcon |
integrating more L1 header files needed by the abb+spi code
|
| Sat, 16 Nov 2013 19:41:30 +0000 |
Michael Spacefalcon |
gsm-fw/bsp/abb+spi: preening of header files, first pass
|
| Sat, 16 Nov 2013 19:03:37 +0000 |
Michael Spacefalcon |
gsm-fw/bsp/abb+spi: initial import from the Leonardo TCS211 version
|
| Thu, 14 Nov 2013 19:16:38 +0000 |
Michael Spacefalcon |
gsm-fw: sprintf %f: handle infinities and NaNs
|
| Thu, 14 Nov 2013 19:03:52 +0000 |
Michael Spacefalcon |
gsm-fw/sprintf: %f implemented, debug output looks correct
|
| Thu, 14 Nov 2013 17:51:33 +0000 |
Michael Spacefalcon |
gsm-fw: sprintf overhaul in preparation for adding %f format support
|
| Tue, 12 Nov 2013 16:57:08 +0000 |
Michael Spacefalcon |
gsm-fw/nucleus/tc[di].c: minor cleanup
|
| Tue, 12 Nov 2013 05:35:48 +0000 |
Michael Spacefalcon |
Our nuc-fw is destined to become gsm-fw, so I went ahead and did the big hg mv
|
| Tue, 12 Nov 2013 05:00:00 +0000 |
Michael Spacefalcon |
fw build for pirelli: set the ASIC_CONF register like the original fw does
|
| Tue, 12 Nov 2013 04:53:30 +0000 |
Michael Spacefalcon |
k5a3281.init (for GTA0x): set WS=3 for nCS0 like the official firmware does
|
| Mon, 11 Nov 2013 11:06:50 +0000 |
Michael Spacefalcon |
pirelli.init: go ahead and switch to 812500 baud automatically
|
| Mon, 11 Nov 2013 10:46:19 +0000 |
Michael Spacefalcon |
fc-xram: print one '.' for every 100 S-records
|
| Mon, 11 Nov 2013 10:17:08 +0000 |
Michael Spacefalcon |
nuc-fw cleanup: old Nucleus demo (w/o TI fw framework) moved out of the way
|
| Mon, 11 Nov 2013 09:56:23 +0000 |
Michael Spacefalcon |
RV bring-up: RVT "system time" heartbeat messages now get printed every 20 s!
|
| Mon, 04 Nov 2013 23:35:11 +0000 |
Michael Spacefalcon |
RV bring-up: lack of timer ticks fixed,
|
| Sun, 03 Nov 2013 00:14:40 +0000 |
Michael Spacefalcon |
fc-xram: execvp of secondary program implemented
|
| Sat, 02 Nov 2013 23:15:42 +0000 |
Michael Spacefalcon |
rvtdump: time-stamped logging implemented
|
| Sat, 02 Nov 2013 22:24:14 +0000 |
Michael Spacefalcon |
rvtdump: some restructuring
|
| Sat, 02 Nov 2013 01:48:11 +0000 |
Michael Spacefalcon |
nuc-fw: switched from nucdemo to Riviera, got some serial output
|
| Fri, 01 Nov 2013 22:59:49 +0000 |
Michael Spacefalcon |
nuc-fw: sans-GSM tick timer and Init_Unmask_IT() implemented
|
| Fri, 01 Nov 2013 08:03:23 +0000 |
Michael Spacefalcon |
nuc-fw: final preparations for the big transition
|
| Fri, 01 Nov 2013 06:13:58 +0000 |
Michael Spacefalcon |
Riviera should be ready for the first TI fw build attempt
|
| Fri, 01 Nov 2013 01:31:39 +0000 |
Michael Spacefalcon |
nuc-fw: more minor preparations for the big transition
|
| Thu, 31 Oct 2013 23:08:59 +0000 |
Michael Spacefalcon |
rvtdump: satisfactory handling of output from Pirelli's fw
|
| Thu, 31 Oct 2013 19:59:16 +0000 |
Michael Spacefalcon |
rvtdump utility written, compiles
|
| Thu, 31 Oct 2013 07:15:32 +0000 |
Michael Spacefalcon |
target-utils command input: don't emit BEL on error conditions
|
| Thu, 31 Oct 2013 06:56:31 +0000 |
Michael Spacefalcon |
fc-[ix]ram: tty pass-thru mode made binary-safe
|
| Thu, 31 Oct 2013 05:50:06 +0000 |
Michael Spacefalcon |
riviera hooked into nuc-fw build
|
| Thu, 31 Oct 2013 04:37:17 +0000 |
Michael Spacefalcon |
RVT compiles
|
| Thu, 31 Oct 2013 00:55:14 +0000 |
Michael Spacefalcon |
RVM compiles
|
| Thu, 31 Oct 2013 00:17:12 +0000 |
Michael Spacefalcon |
All of RVF compiles
|
| Wed, 30 Oct 2013 23:19:21 +0000 |
Michael Spacefalcon |
starting to compile RVF
|
| Tue, 29 Oct 2013 07:03:45 +0000 |
Michael Spacefalcon |
checking in Riviera code from the Sotomodem version
|
| Mon, 28 Oct 2013 07:35:47 +0000 |
Michael Spacefalcon |
nuc-fw: low-level serial code should be complete
|
| Mon, 28 Oct 2013 06:49:44 +0000 |
Michael Spacefalcon |
started integrating TI's serial code
|
| Sun, 27 Oct 2013 04:43:04 +0000 |
Michael Spacefalcon |
nuc-fw: Init_Target() reconstructed
|
| Thu, 24 Oct 2013 02:47:14 +0000 |
Michael Spacefalcon |
nuc-fw: continuing lowest-level BSP integration
|
| Sun, 20 Oct 2013 21:12:41 +0000 |
Michael Spacefalcon |
nuc-fw/bsp: niq32.c compiles
|
| Sun, 20 Oct 2013 08:43:41 +0000 |
Michael Spacefalcon |
nuc-fw/bsp: niq32.c and sim.h replaced with new versions
|
| Sun, 20 Oct 2013 07:58:00 +0000 |
Michael Spacefalcon |
nuc-fw/bsp: more reconciliation
|
| Sun, 20 Oct 2013 07:04:15 +0000 |
Michael Spacefalcon |
nuc-fw/bsp: per-target ARMIO init implemented
|
| Sat, 19 Oct 2013 18:59:34 +0000 |
Michael Spacefalcon |
nuc-fw/bsp: beginning of reconciliation with the Leonardo semi-src version
|
| Fri, 13 Sep 2013 17:00:09 +0000 |
Michael Spacefalcon |
target-utils/Makefile: make clean: support for subset packaging
|
| Fri, 13 Sep 2013 16:47:09 +0000 |
Michael Spacefalcon |
loadtools/README: documentation for loadtools should now be complete
|
| Wed, 11 Sep 2013 17:58:55 +0000 |
Michael Spacefalcon |
fc-loadtool program-{m0,srec}: more usable progress indication
|
| Tue, 03 Sep 2013 07:31:26 +0000 |
Michael Spacefalcon |
fc-loadtool help implemented
|
| Mon, 02 Sep 2013 03:07:07 +0000 |
Michael Spacefalcon |
pirexplore: approaching sanity with the LCD
|
| Mon, 02 Sep 2013 01:28:11 +0000 |
Michael Spacefalcon |
target-utils/libmpffs: minor refactoring, read into RAM implemented
|
| Mon, 02 Sep 2013 00:41:18 +0000 |
Michael Spacefalcon |
pirexplore FFS: buglet fixed, works now
|
| Mon, 02 Sep 2013 00:33:54 +0000 |
Michael Spacefalcon |
pirexplore: FFS find command implemented
|
| Sun, 01 Sep 2013 21:55:51 +0000 |
Michael Spacefalcon |
pirexplore: beginning of FFS support
|
| Sun, 01 Sep 2013 18:59:48 +0000 |
Michael Spacefalcon |
fc-loadtool: flash program-{m0,srec} implemented
|
| Sun, 01 Sep 2013 17:20:58 +0000 |
Michael Spacefalcon |
fc-loadtool dump2srec: decorate the SREC output file with S0 and S7 records
|
| Sun, 01 Sep 2013 12:54:42 +0000 |
Michael Spacefalcon |
some README files added
|
| Sun, 01 Sep 2013 04:18:32 +0000 |
Michael Spacefalcon |
fc-loadtool: GTA0x flash support
|
| Sun, 01 Sep 2013 03:42:11 +0000 |
Michael Spacefalcon |
fc-loadtool flash program-bin: smarter progress indication
|
