FreeCalypso > hg > fc-tourmaline
view src/nucleus/tms.c @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 08 Jun 2023 08:23:37 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/*************************************************************************/ /* */ /* Copyright Mentor Graphics Corporation 2002 */ /* All Rights Reserved. */ /* */ /* THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS */ /* THE PROPERTY OF MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS */ /* SUBJECT TO LICENSE TERMS. */ /* */ /*************************************************************************/ /*************************************************************************/ /* */ /* FILE NAME VERSION */ /* */ /* tms.c Nucleus PLUS 1.14 */ /* */ /* COMPONENT */ /* */ /* TM - Timer Management */ /* */ /* DESCRIPTION */ /* */ /* This file contains supplemental routines for the timer */ /* management component. */ /* */ /* DATA STRUCTURES */ /* */ /* None */ /* */ /* FUNCTIONS */ /* */ /* TMS_Create_Timer Create an application timer */ /* TMS_Delete_Timer Delete an application timer */ /* TMS_Reset_Timer Reset application timer */ /* TMS_Control_Timer Enable/Disable application */ /* timer */ /* */ /* DEPENDENCIES */ /* */ /* cs_extr.h Common Service functions */ /* tc_extr.h Thread Control functions */ /* tm_extr.h Timer functions */ /* hi_extr.h History functions */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1994 Created initial version 1.1 from */ /* previous version of TMC.C */ /* */ /* 03-18-1994 Verified version 1.1 */ /* 04-17-1996 updated to version 1.2 */ /* 03-24-1998 Released version 1.3. */ /* 03-26-1999 Released 1.11m (new release */ /* numbering scheme) */ /* 04-17-2002 Released version 1.13m */ /* 11-07-2002 Released version 1.14 */ /*************************************************************************/ #define NU_SOURCE_FILE #include "cs_extr.h" /* Common service functions */ #include "tc_extr.h" /* Thread control functions */ #include "tm_extr.h" /* Timer functions */ #include "hi_extr.h" /* History functions */ #include "profiler.h" /* ProView interface */ /* Define external inner-component global data references. */ extern CS_NODE *TMD_Created_Timers_List; extern UNSIGNED TMD_Total_Timers; extern TM_TCB *TMD_Active_Timers_List; extern INT TMD_Active_List_Busy; extern TC_PROTECT TMD_Created_List_Protect; /* Define internal function prototypes. */ VOID TMC_Start_Timer(TM_TCB *timer, UNSIGNED time); VOID TMC_Stop_Timer(TM_TCB *timer); /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* TMS_Create_Timer */ /* */ /* DESCRIPTION */ /* */ /* This function creates an application timer and places it on the */ /* list of created timers. The timer is activated if designated by */ /* the enable parameter. */ /* */ /* CALLED BY */ /* */ /* Application */ /* TMSE_Create_Timer Error checking shell */ /* */ /* CALLS */ /* */ /* CSC_Place_On_List Add node to linked-list */ /* [HIC_Make_History_Entry] Make entry in history log */ /* [TCT_Check_Stack] Stack checking function */ /* TCT_Protect Data structure protect */ /* TCT_Unprotect Un-protect data structure */ /* TMS_Control_Timer Enable the new timer */ /* */ /* INPUTS */ /* */ /* timer_ptr Timer control block pointer */ /* name Timer name */ /* expiration_routine Timer expiration routine */ /* id Timer expiration ID */ /* initial_time Initial expiration time */ /* reschedule_time Reschedule expiration time */ /* enable Automatic enable option */ /* */ /* OUTPUTS */ /* */ /* NU_SUCCESS */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Changed function prototype, */ /* resulting in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS TMS_Create_Timer(NU_TIMER *timer_ptr, CHAR *name, VOID (*expiration_routine)(UNSIGNED), UNSIGNED id, UNSIGNED initial_time, UNSIGNED reschedule_time, OPTION enable) { R1 TM_APP_TCB *timer; /* Timer control block ptr */ INT i; /* Working index variable */ NU_SUPERV_USER_VARIABLES /* Switch to supervisor mode */ NU_SUPERVISOR_MODE(); /* Move input timer pointer into internal pointer. */ timer = (TM_APP_TCB *) timer_ptr; #ifdef NU_ENABLE_STACK_CHECK /* Call stack checking function to check for an overflow condition. */ TCT_Check_Stack(); #endif #ifdef NU_ENABLE_HISTORY /* Make an entry that corresponds to this function in the system history log. */ HIC_Make_History_Entry(NU_CREATE_TIMER_ID, (UNSIGNED) timer, (UNSIGNED) name, (UNSIGNED) expiration_routine); #endif /* First, clear the timer ID just in case it is an old Timer Control Block. */ timer -> tm_id = 0; /* Fill in the timer name. */ for (i = 0; i < NU_MAX_NAME; i++) timer -> tm_name[i] = name[i]; /* Load the timer with the appropriate values. */ timer -> tm_expiration_routine = expiration_routine; timer -> tm_expiration_id = id; timer -> tm_expirations = 0; timer -> tm_initial_time = initial_time; timer -> tm_reschedule_time = reschedule_time; timer -> tm_actual_timer.tm_timer_type = TM_APPL_TIMER; timer -> tm_enabled = NU_FALSE; /* Initialize link pointers. */ timer -> tm_created.cs_previous = NU_NULL; timer -> tm_created.cs_next = NU_NULL; timer -> tm_actual_timer.tm_next_timer = NU_NULL; timer -> tm_actual_timer.tm_previous_timer= NU_NULL; timer -> tm_actual_timer.tm_information = (VOID *) timer; /* Protect against access to the list of created timers. */ TCT_Protect(&TMD_Created_List_Protect); /* At this point the timer is completely built. The ID can now be set and it can be linked into the created timer list. */ timer -> tm_id = TM_TIMER_ID; /* Link the timer into the list of created timers and increment the total number of timers in the system. */ CSC_Place_On_List(&TMD_Created_Timers_List, &(timer -> tm_created)); TMD_Total_Timers++; #ifdef INCLUDE_PROVIEW _RTProf_DumpTimer(RT_PROF_CREATE_TIMER,timer,RT_PROF_OK); #endif /* Release protection against access to the list of created timers. */ TCT_Unprotect(); /* Determine if the timer should be enabled. */ if (enable == NU_ENABLE_TIMER) /* Activate the timer. */ TMS_Control_Timer(timer_ptr, NU_ENABLE_TIMER); /* Return to user mode */ NU_USER_MODE(); /* Return successful completion. */ return(NU_SUCCESS); } /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* TMS_Delete_Timer */ /* */ /* DESCRIPTION */ /* */ /* This function deletes an application timer and removes it from */ /* the list of created timers. */ /* */ /* CALLED BY */ /* */ /* Application */ /* TMSE_Delete_Timer Error checking shell */ /* */ /* CALLS */ /* */ /* CSC_Remove_From_List Remove node from list */ /* [HIC_Make_History_Entry] Make entry in history log */ /* [TCT_Check_Stack] Stack checking function */ /* TCT_Protect Protect created list */ /* TCT_System_Protect Protect active list */ /* TCT_Unprotect Release protection */ /* */ /* INPUTS */ /* */ /* timer_ptr Timer control block pointer */ /* */ /* OUTPUTS */ /* */ /* NU_NOT_DISABLED Timer not disabled first */ /* NU_SUCCESS */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Modified protection logic to use */ /* system protection, changed */ /* function prototype, resulting */ /* in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS TMS_Delete_Timer(NU_TIMER *timer_ptr) { TM_APP_TCB *timer; /* Timer control block ptr */ STATUS status; /* Completion status */ NU_SUPERV_USER_VARIABLES /* Switch to supervisor mode */ NU_SUPERVISOR_MODE(); /* Move input timer pointer into internal pointer. */ timer = (TM_APP_TCB *) timer_ptr; #ifdef NU_ENABLE_STACK_CHECK /* Call stack checking function to check for an overflow condition. */ TCT_Check_Stack(); #endif #ifdef NU_ENABLE_HISTORY /* Make an entry that corresponds to this function in the system history log. */ HIC_Make_History_Entry(NU_DELETE_TIMER_ID, (UNSIGNED) timer, (UNSIGNED) 0, (UNSIGNED) 0); #endif /* Initialize the status. */ status = NU_SUCCESS; /* Use system protect to protect the active timer list temporarily. */ TCT_System_Protect(); /* Determine if the timer is currently disabled. */ if (timer -> tm_enabled) { /* Error, indicate to the caller that the timer is currently active. */ status = NU_NOT_DISABLED; #ifdef INCLUDE_PROVIEW _RTProf_DumpTimer(RT_PROF_DELETE_TIMER,timer,RT_PROF_FAIL); #endif } else { /* Clear the timer ID. */ timer -> tm_id = 0; #ifdef INCLUDE_PROVIEW _RTProf_DumpTimer(RT_PROF_DELETE_TIMER,timer,RT_PROF_OK); #endif /* INCLUDE_PROVIEW */ } /* Release protection. */ TCT_Unprotect(); /* Determine if an error was detected. */ if (status == NU_SUCCESS) { /* Protect against access to the list of created timers. */ TCT_Protect(&TMD_Created_List_Protect); /* Remove the timer from the list of created timers. */ CSC_Remove_From_List(&TMD_Created_Timers_List, &(timer -> tm_created)); /* Decrement the total number of created timers. */ TMD_Total_Timers--; /* Release protection against access to the list of created timers. */ TCT_Unprotect(); } /* Return to user mode */ NU_USER_MODE(); /* Return completion status. */ return(status); } /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* TMS_Reset_Timer */ /* */ /* DESCRIPTION */ /* */ /* This function resets the specified application timer. Note that */ /* the timer must be in a disabled state prior to this call. The */ /* timer is activated after it is reset if the enable parameter */ /* specifies automatic activation. */ /* */ /* CALLED BY */ /* */ /* Application */ /* TMSE_Reset_Timer Error checking shell */ /* */ /* CALLS */ /* */ /* [HIC_Make_History_Entry] Make entry in history log */ /* [TCT_Check_Stack] Stack checking function */ /* TCT_System_Protect Protect active list */ /* TCT_Unprotect Release protection */ /* TMS_Control_Timer Enable/disable timer */ /* */ /* INPUTS */ /* */ /* timer_ptr Timer control block pointer */ /* expiration_routine Timer expiration routine */ /* initial_time Initial expiration time */ /* reschedule_time Reschedule expiration time */ /* enable Automatic enable option */ /* */ /* OUTPUTS */ /* */ /* NU_NOT_DISABLED Timer not disabled first */ /* NU_SUCCESS Successful completion */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Modified protection logic to use */ /* system protection, changed */ /* function prototype, resulting */ /* in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS TMS_Reset_Timer(NU_TIMER *timer_ptr, VOID (*expiration_routine)(UNSIGNED), UNSIGNED initial_time, UNSIGNED reschedule_time, OPTION enable) { R1 TM_APP_TCB *timer; /* Timer control block ptr */ STATUS status; /* Completion status */ NU_SUPERV_USER_VARIABLES /* Switch to supervisor mode */ NU_SUPERVISOR_MODE(); /* Move input timer pointer into internal pointer. */ timer = (TM_APP_TCB *) timer_ptr; #ifdef NU_ENABLE_STACK_CHECK /* Call stack checking function to check for an overflow condition. */ TCT_Check_Stack(); #endif #ifdef NU_ENABLE_HISTORY /* Make an entry that corresponds to this function in the system history log. */ HIC_Make_History_Entry(NU_RESET_TIMER_ID, (UNSIGNED) timer, (UNSIGNED) expiration_routine, (UNSIGNED) initial_time); #endif /* Protect against access to the active timer list. */ TCT_System_Protect(); /* Determine if this timer is active. An active timer cannot be reset. */ if (timer -> tm_enabled) { /* Indicate that the timer is active by returning the proper status. */ status = NU_NOT_DISABLED; #ifdef INCLUDE_PROVIEW _RTProf_DumpTimer(RT_PROF_RESET_TIMER,timer,RT_PROF_FAIL); #endif /* INCLUDE_PROVIEW */ } else { /* Load the timer with the appropriate values. */ timer -> tm_expiration_routine = expiration_routine; timer -> tm_expirations = 0; timer -> tm_initial_time = initial_time; timer -> tm_reschedule_time = reschedule_time; /* Indicate successful completion status. */ status = NU_SUCCESS; #ifdef INCLUDE_PROVIEW _RTProf_DumpTimer(RT_PROF_RESET_TIMER,timer,RT_PROF_OK); #endif /* INCLUDE_PROVIEW */ } /* Release protection. */ TCT_Unprotect(); /* Determine if the timer needs to be enabled. */ if ((status == NU_SUCCESS) && (enable == NU_ENABLE_TIMER)) /* Activate the timer. */ TMS_Control_Timer(timer_ptr, NU_ENABLE_TIMER); /* Return to user mode */ NU_USER_MODE(); /* Return completion status. */ return(status); } /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* TMS_Control_Timer */ /* */ /* DESCRIPTION */ /* */ /* This function either enables or disables the specified timer. */ /* If the timer is already in the desired state, simply leave it */ /* alone. */ /* */ /* CALLED BY */ /* */ /* Application */ /* TMSE_Control_Timer Error checking shell */ /* */ /* CALLS */ /* */ /* [HIC_Make_History_Entry] Make entry in history log */ /* [TCT_Check_Stack] Stack checking function */ /* TCT_System_Protect Protect the active list */ /* TCT_Unprotect Release protection */ /* TMC_Start_Timer Start a timer */ /* TMC_Stop_Timer Stop a timer */ /* */ /* INPUTS */ /* */ /* app_timer Timer control block pointer */ /* enable Disable/enable timer option */ /* */ /* OUTPUTS */ /* */ /* NU_SUCCESS If service is successful */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Modified protection logic to use */ /* system protection, changed */ /* function prototype, resulting */ /* in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS TMS_Control_Timer(NU_TIMER *app_timer, OPTION enable) { R1 TM_APP_TCB *timer; /* Timer control block ptr */ TM_TCB *timer_ptr; /* Actual timer pointer */ UNSIGNED time; /* Variable to hold request */ NU_SUPERV_USER_VARIABLES /* Switch to supervisor mode */ NU_SUPERVISOR_MODE(); /* Move input timer pointer into internal pointer. */ timer = (TM_APP_TCB *) app_timer; #ifdef NU_ENABLE_STACK_CHECK /* Call stack checking function to check for an overflow condition. */ TCT_Check_Stack(); #endif #ifdef NU_ENABLE_HISTORY /* Make an entry that corresponds to this function in the system history log. */ HIC_Make_History_Entry(NU_CONTROL_TIMER_ID, (UNSIGNED) timer, (UNSIGNED) enable, (UNSIGNED) 0); #endif /* Protect against simultaneous access to the active timer list. */ TCT_System_Protect(); /* Setup pointer to actual timer part of the control block. */ timer_ptr = &(timer -> tm_actual_timer); /* Determine what type of request is present. */ if ((enable == NU_ENABLE_TIMER) && (!timer -> tm_enabled)) { /* Enable timer request is present and timer is currently disabled. */ /* Determine how to setup the remaining field in the actual timer. */ if (timer -> tm_expirations) /* Use reschedule time since this timer has expired previously. */ time = timer -> tm_reschedule_time; else /* Use initial time since this timer has never expired. */ time = timer -> tm_initial_time; /* Mark the application timer as enabled. */ timer -> tm_enabled = NU_TRUE; /* Call the start timer routine to actually start the timer. */ TMC_Start_Timer(&(timer -> tm_actual_timer), time); } else if ((enable == NU_DISABLE_TIMER) && (timer -> tm_enabled)) { /* Disable timer request is present and timer is currently enabled. */ TMC_Stop_Timer(timer_ptr); /* Mark the timer as disabled. */ timer -> tm_enabled = NU_FALSE; } #ifdef INCLUDE_PROVIEW _RTProf_DumpTimer(RT_PROF_CONTROL_TIMER,timer,RT_PROF_OK); #endif /* INCLUDE_PROVIEW */ /* Release protection. */ TCT_Unprotect(); /* Return to user mode */ NU_USER_MODE(); /* Return the completion status. */ return(NU_SUCCESS); }