view src/nucleus/pise.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*************************************************************************/
/*                                                                       */
/*               Copyright Mentor Graphics Corporation 2002              */
/*                         All Rights Reserved.                          */
/*                                                                       */
/* THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS  */
/* THE PROPERTY OF MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS   */
/* SUBJECT TO LICENSE TERMS.                                             */
/*                                                                       */
/*************************************************************************/

/*************************************************************************/
/*                                                                       */
/* FILE NAME                                               VERSION       */
/*                                                                       */
/*      pise.c                                         Nucleus PLUS 1.14 */
/*                                                                       */
/* COMPONENT                                                             */
/*                                                                       */
/*      PI - Pipe Management                                             */
/*                                                                       */
/* DESCRIPTION                                                           */
/*                                                                       */
/*      This file contains error checking routines for supplemental      */
/*      functions of the Pipe component.  This permits easy removal of   */
/*      error checking logic when it is not needed.                      */
/*                                                                       */
/* DATA STRUCTURES                                                       */
/*                                                                       */
/*      None                                                             */
/*                                                                       */
/* FUNCTIONS                                                             */
/*                                                                       */
/*      PISE_Reset_Pipe                     Reset a pipe                 */
/*      PISE_Send_To_Front_Of_Pipe          Send message to pipe's front */
/*      PISE_Broadcast_To_Pipe              Broadcast message to pipe    */
/*                                                                       */
/* DEPENDENCIES                                                          */
/*                                                                       */
/*      cs_extr.h                           Common Service functions     */
/*      tc_extr.h                           Thread Control functions     */
/*      pi_extr.h                           Pipe functions               */
/*                                                                       */
/* HISTORY                                                               */
/*                                                                       */
/*         DATE                    REMARKS                               */
/*                                                                       */
/*      03-01-1994      Created initial version 1.1 from                 */
/*                      routines originally in core                      */
/*                      error checking file                              */
/*                                                                       */
/*      03-18-1994      Verified version 1.1                             */
/*      04-17-1996      updated to version 1.2                           */
/*      03-24-1998      Released version 1.3.                            */
/*      04-17-2002      Released version 1.13m                           */
/*      11-07-2002      Released version 1.14                            */
/*************************************************************************/
#define         NU_SOURCE_FILE


#include        "cs_extr.h"                 /* Common service functions  */
#include        "tc_extr.h"                 /* Thread control functions  */
#include        "pi_extr.h"                 /* Pipe functions            */


/*************************************************************************/
/*                                                                       */
/* FUNCTION                                                              */
/*                                                                       */
/*      PISE_Reset_Pipe                                                  */
/*                                                                       */
/* DESCRIPTION                                                           */
/*                                                                       */
/*      This function performs error checking on the parameter supplied  */
/*      to the pipe reset function.                                      */
/*                                                                       */
/* CALLED BY                                                             */
/*                                                                       */
/*      Application                                                      */
/*                                                                       */
/* CALLS                                                                 */
/*                                                                       */
/*      PIS_Reset_Pipe                      Actual reset pipe function   */
/*                                                                       */
/* INPUTS                                                                */
/*                                                                       */
/*      pipe_ptr                            Pipe control block pointer   */
/*                                                                       */
/* OUTPUTS                                                               */
/*                                                                       */
/*      NU_INVALID_PIPE                     Invalid pipe pointer         */
/*                                                                       */
/* HISTORY                                                               */
/*                                                                       */
/*        DATE                    REMARKS                                */
/*                                                                       */
/*      03-01-1993      Created initial version 1.0                      */
/*      04-19-1993      Verified version 1.0                             */
/*      03-01-1994      Modified function interface,                     */
/*                      resulting in version 1.1                         */
/*                                                                       */
/*      03-18-1994      Verified version 1.1                             */
/*                                                                       */
/*************************************************************************/
STATUS  PISE_Reset_Pipe(NU_PIPE *pipe_ptr)
{

PI_PCB         *pipe;
STATUS          status;


    /* Move input pipe pointer into internal pointer.  */
    pipe =  (PI_PCB *) pipe_ptr;

    /* Determine if there is an error with the pipe pointer.  */
    if (pipe == NU_NULL)
    
        /* Indicate that the pipe pointer is invalid.  */
        status =  NU_INVALID_PIPE;
        
    else if (pipe -> pi_id != PI_PIPE_ID)
    
        /* Indicate that the pipe pointer is invalid.  */
        status =  NU_INVALID_PIPE;

    else
    
        /* All the parameters are okay, call the actual function to reset
           a pipe.  */
        status =  PIS_Reset_Pipe(pipe_ptr);
                                  
    /* Return completion status.  */
    return(status);
}


/*************************************************************************/
/*                                                                       */
/* FUNCTION                                                              */
/*                                                                       */
/*      PISE_Send_To_Front_Of_Pipe                                       */
/*                                                                       */
/* DESCRIPTION                                                           */
/*                                                                       */
/*      This function performs error checking on the parameters supplied */
/*      to the send message to front of pipe function.                   */
/*                                                                       */
/* CALLED BY                                                             */
/*                                                                       */
/*      Application                                                      */
/*                                                                       */
/* CALLS                                                                 */
/*                                                                       */
/*      PIS_Send_To_Front_Of_Pipe           Actual send to front of pipe */
/*                                            function                   */
/*      TCCE_Suspend_Error                  Check suspend validity       */
/*                                                                       */
/* INPUTS                                                                */
/*                                                                       */
/*      pipe_ptr                            Pipe control block pointer   */
/*      message                             Pointer to message to send   */
/*      size                                Size of message to send      */
/*      suspend                             Suspension option if full    */
/*                                                                       */
/* OUTPUTS                                                               */
/*                                                                       */
/*      NU_INVALID_PIPE                     Invalid pipe pointer         */
/*      NU_INVALID_POINTER                  Invalid message pointer      */
/*      NU_INVALID_SIZE                     Invalid message size         */
/*      NU_INVALID_SUSPEND                  Invalid suspend request      */
/*                                                                       */
/* HISTORY                                                               */
/*                                                                       */
/*        DATE                    REMARKS                                */
/*                                                                       */
/*      03-01-1993      Created initial version 1.0                      */
/*      04-19-1993      Verified version 1.0                             */
/*      03-01-1994      Modified function interface,                     */
/*                      resulting in version 1.1                         */
/*                                                                       */
/*      03-18-1994      Verified version 1.1                             */
/*                                                                       */
/*************************************************************************/
STATUS  PISE_Send_To_Front_Of_Pipe(NU_PIPE *pipe_ptr, VOID *message, 
                                    UNSIGNED size, UNSIGNED suspend)
{

PI_PCB         *pipe;
STATUS          status;


    /* Move input pipe pointer into internal pointer.  */
    pipe =  (PI_PCB *) pipe_ptr;

    /* Determine if there is an error with the pipe pointer.  */
    if (pipe == NU_NULL)
    
        /* Indicate that the pipe pointer is invalid.  */
        status =  NU_INVALID_PIPE;
        
    else if (pipe -> pi_id != PI_PIPE_ID)
    
        /* Indicate that the pipe pointer is invalid.  */
        status =  NU_INVALID_PIPE;

    else if (message == NU_NULL)
    
        /* Indicate that the pointer to the message is invalid.  */
        status =  NU_INVALID_POINTER;

    else if (size == 0)

        /* Indicate that the message size is invalid   */
        status =  NU_INVALID_SIZE;

    else if ((pipe -> pi_fixed_size) && (size != pipe -> pi_message_size))
    
        /* Indicate that the message size is invalid.  */
        status =  NU_INVALID_SIZE;

    else if ((!pipe -> pi_fixed_size) && (size > pipe -> pi_message_size))
    
        /* Indicate that the message size is invalid.  */
        status =  NU_INVALID_SIZE;
        
    else if ((suspend) && (TCCE_Suspend_Error()))
    
        /* Indicate that suspension is only valid from a non-task thread.  */
        status =  NU_INVALID_SUSPEND;
    
    else
    
        /* All the parameters are okay, call the actual function to send
           a message to a pipe.  */
        status =  PIS_Send_To_Front_Of_Pipe(pipe_ptr, message, size, suspend);
                                  
    /* Return completion status.  */
    return(status);
}


/*************************************************************************/
/*                                                                       */
/* FUNCTION                                                              */
/*                                                                       */
/*      PISE_Broadcast_To_Pipe                                           */
/*                                                                       */
/* DESCRIPTION                                                           */
/*                                                                       */
/*      This function performs error checking on the parameters supplied */
/*      to the broadcast message to pipe function.                       */
/*                                                                       */
/* CALLED BY                                                             */
/*                                                                       */
/*      Application                                                      */
/*                                                                       */
/* CALLS                                                                 */
/*                                                                       */
/*      PIS_Broadcast_To_Pipe               Actual broadcast message to  */
/*                                            pipe function              */
/*      TCCE_Suspend_Error                  Check suspend validity       */
/*                                                                       */
/* INPUTS                                                                */
/*                                                                       */
/*      pipe_ptr                            Pipe control block pointer   */
/*      message                             Pointer to message to send   */
/*      size                                Size of message to send      */
/*      suspend                             Suspension option if full    */
/*                                                                       */
/* OUTPUTS                                                               */
/*                                                                       */
/*      NU_INVALID_PIPE                     Invalid pipe pointer         */
/*      NU_INVALID_POINTER                  Invalid message pointer      */
/*      NU_INVALID_SIZE                     Invalid message size         */
/*      NU_INVALID_SUSPEND                  Invalid suspend request      */
/*                                                                       */
/* HISTORY                                                               */
/*                                                                       */
/*        DATE                    REMARKS                                */
/*                                                                       */
/*      03-01-1993      Created initial version 1.0                      */
/*      04-19-1993      Verified version 1.0                             */
/*      03-01-1994      Modified function interface,                     */
/*                      resulting in version 1.1                         */
/*                                                                       */
/*      03-18-1994      Verified version 1.1                             */
/*                                                                       */
/*************************************************************************/
STATUS  PISE_Broadcast_To_Pipe(NU_PIPE *pipe_ptr, VOID *message, 
                                        UNSIGNED size, UNSIGNED suspend)
{

PI_PCB         *pipe;
STATUS          status;


    /* Move input pipe pointer into internal pointer.  */
    pipe =  (PI_PCB *) pipe_ptr;

    /* Determine if there is an error with the pipe pointer.  */
    if (pipe == NU_NULL)
    
        /* Indicate that the pipe pointer is invalid.  */
        status =  NU_INVALID_PIPE;
        
    else if (pipe -> pi_id != PI_PIPE_ID)
    
        /* Indicate that the pipe pointer is invalid.  */
        status =  NU_INVALID_PIPE;

    else if (message == NU_NULL)
    
        /* Indicate that the pointer to the message is invalid.  */
        status =  NU_INVALID_POINTER;

    else if (size == 0)

        /* Indicate that the message size is invalid   */
        status =  NU_INVALID_SIZE;

    else if ((pipe -> pi_fixed_size) && (size != pipe -> pi_message_size))
    
        /* Indicate that the message size is invalid.  */
        status =  NU_INVALID_SIZE;

    else if ((!pipe -> pi_fixed_size) && (size > pipe -> pi_message_size))
    
        /* Indicate that the message size is invalid.  */
        status =  NU_INVALID_SIZE;
        
    else if ((suspend) && (TCCE_Suspend_Error()))
    
        /* Indicate that suspension is only valid from a non-task thread.  */
        status =  NU_INVALID_SUSPEND;
    
    else
    
        /* All the parameters are okay, call the actual function to broadcast
           a message to a pipe.  */
        status =  PIS_Broadcast_To_Pipe(pipe_ptr, message, size, suspend);
                                  
    /* Return completion status.  */
    return(status);
}