FreeCalypso > hg > fc-tourmaline
view src/nucleus/ioce.c @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 08 Jun 2023 08:23:37 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/*************************************************************************/ /* */ /* Copyright Mentor Graphics Corporation 2002 */ /* All Rights Reserved. */ /* */ /* THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS */ /* THE PROPERTY OF MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS */ /* SUBJECT TO LICENSE TERMS. */ /* */ /*************************************************************************/ /*************************************************************************/ /* */ /* FILE NAME VERSION */ /* */ /* ioce.c Nucleus PLUS 1.14 */ /* */ /* COMPONENT */ /* */ /* IO - Input/Output Driver Management */ /* */ /* DESCRIPTION */ /* */ /* This file contains the error checking routines for the functions */ /* in the Input/Output Driver component. This permits easy removal */ /* of error checking logic when it is not needed. */ /* */ /* DATA STRUCTURES */ /* */ /* None */ /* */ /* FUNCTIONS */ /* */ /* IOCE_Create_Driver Create an I/O driver */ /* IOCE_Delete_Driver Delete an I/O driver */ /* IOCE_Request_Driver Make an I/O driver request */ /* IOCE_Resume_Driver Resume a task suspended in */ /* an I/O driver */ /* IOCE_Suspend_Driver Suspend a task inside an I/O */ /* driver */ /* */ /* DEPENDENCIES */ /* */ /* cs_extr.h Common Service functions */ /* tc_extr.h Thread Control functions */ /* io_extr.h I/O driver functions */ /* hi_extr.h History functions */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Modified logic that checked task */ /* status without protection of */ /* scheduling structures, */ /* resulting in version 1.0a */ /* 03-01-1994 Verified version 1.0a */ /* 03-01-1994 Changed name original error */ /* checking file and changed */ /* function interfaces, resulting */ /* in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* 04-17-1996 updated to version 1.2 */ /* 03-24-1998 Released version 1.3 */ /* 04-17-2002 Released version 1.13m */ /* 11-07-2002 Released version 1.14 */ /*************************************************************************/ #define NU_SOURCE_FILE #include "cs_extr.h" /* Common service functions */ #include "tc_extr.h" /* Thread control functions */ #include "io_extr.h" /* I/O driver functions */ #include "hi_extr.h" /* History functions */ /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* IOCE_Create_Driver */ /* */ /* DESCRIPTION */ /* */ /* This function performs error checking on the parameters supplied */ /* to the I/O driver create function. */ /* */ /* CALLED BY */ /* */ /* Application */ /* */ /* CALLS */ /* */ /* IOC_Create_Driver Actual create driver routine */ /* */ /* INPUTS */ /* */ /* driver Driver control block pointer */ /* name Driver's logical name */ /* driver_entry Driver's point of entry */ /* */ /* OUTPUTS */ /* */ /* NU_INVALID_DRIVER Indicates driver pointer is */ /* NULL or is already in use */ /* NU_INVALID_POINTER Indicates the driver's entry */ /* pointer is NULL */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Changed function interface, */ /* resulting in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS IOCE_Create_Driver(NU_DRIVER *driver, CHAR *name, VOID (*driver_entry)(NU_DRIVER *, NU_DRIVER_REQUEST *)) { STATUS status; /* Completion status */ /* Check for an invalid driver pointer. */ if ((driver == NU_NULL) || (driver -> nu_driver_id == IO_DRIVER_ID)) /* Indicate that the driver pointer is invalid. */ status = NU_INVALID_DRIVER; else if (driver_entry == NU_NULL) /* Indicate that the driver entry point is invalid. */ status = NU_INVALID_POINTER; else /* Parameters are okay, call actual function to create an I/O driver. */ status = IOC_Create_Driver(driver, name, driver_entry); /* Return completion status. */ return(status); } /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* IOCE_Delete_Driver */ /* */ /* DESCRIPTION */ /* */ /* This function performs error checking on the parameters supplied */ /* to the I/O driver delete function. */ /* */ /* CALLED BY */ /* */ /* Application */ /* */ /* CALLS */ /* */ /* IOC_Delete_Driver Actual delete driver routine */ /* */ /* INPUTS */ /* */ /* driver Driver control block pointer */ /* */ /* OUTPUTS */ /* */ /* NU_INVALID_DRIVER Indicates the driver pointer */ /* is invalid */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Changed function interface, */ /* resulting in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS IOCE_Delete_Driver(NU_DRIVER *driver) { STATUS status; /* Completion status */ /* Determine if the driver pointer is valid. */ if ((driver) && (driver -> nu_driver_id == IO_DRIVER_ID)) /* Driver pointer is valid, call function to delete it. */ status = IOC_Delete_Driver(driver); else /* Driver pointer is invalid, indicate in completion status. */ status = NU_INVALID_DRIVER; /* Return completion status. */ return(status); } /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* IOCE_Request_Driver */ /* */ /* DESCRIPTION */ /* */ /* This function performs error checking on the parameters supplied */ /* to the I/O driver request function. */ /* */ /* CALLED BY */ /* */ /* Application */ /* */ /* CALLS */ /* */ /* IOC_Request_Driver Actual request driver routine*/ /* */ /* INPUTS */ /* */ /* driver Driver control block pointer */ /* request User's I/O request */ /* */ /* OUTPUTS */ /* */ /* NU_INVALID_DRIVER Indicates the driver pointer */ /* is invalid */ /* NU_INVALID_POINTER Indicates the request pointer*/ /* is invalid */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Changed function interface, */ /* resulting in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS IOCE_Request_Driver(NU_DRIVER *driver , NU_DRIVER_REQUEST *request) { STATUS status; /* Completion status */ /* Determine if driver pointer is invalid. */ if (driver == NU_NULL) /* Driver pointer is invalid, indicate in completion status. */ status = NU_INVALID_DRIVER; else if (driver -> nu_driver_id != IO_DRIVER_ID) /* Driver pointer is invalid, indicate in completion status. */ status = NU_INVALID_DRIVER; else if (request == NU_NULL) /* Request pointer is invalid, indicate in completion status. */ status = NU_INVALID_POINTER; else /* Parameters are valid, call actual function. */ status = IOC_Request_Driver(driver, request); /* Return the completion status. */ return(status); } /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* IOCE_Resume_Driver */ /* */ /* DESCRIPTION */ /* */ /* This function performs error checking on the parameters supplied */ /* to the I/O driver resume function. */ /* */ /* CALLED BY */ /* */ /* Application */ /* */ /* CALLS */ /* */ /* TCCE_Validate_Resume Validate resume driver */ /* request against actual */ /* status */ /* IOC_Resume_Driver Actual resume driver routine */ /* */ /* INPUTS */ /* */ /* task Pointer of task to resume */ /* */ /* OUTPUTS */ /* */ /* NU_INVALID_TASK Indicates the task pointer */ /* is invalid */ /* NU_INVALID_RESUME Indicates the task is not */ /* suspended */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Modified logic that checked task */ /* status without protection of */ /* scheduling structures, */ /* resulting in version 1.0a */ /* 03-01-1994 Verified version 1.0a */ /* 03-01-1994 Changed function interface, */ /* resulting in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS IOCE_Resume_Driver(NU_TASK *task) { STATUS status; /* Completion status */ /* Determine if the task pointer is valid. */ if ((task == NU_NULL) || (((TC_TCB *) task) -> tc_id != TC_TASK_ID)) /* Task pointer is invalid. */ status = NU_INVALID_TASK; /* Check actual status of task to see if request is valid. */ else if (TCCE_Validate_Resume(NU_DRIVER_SUSPEND, task)) /* Task is not suspended in a driver, return error status. */ status = NU_INVALID_RESUME; else /* Call the actual resume service. */ status = IOC_Resume_Driver(task); /* Return the completion status. */ return(status); } /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* IOCE_Suspend_Driver */ /* */ /* DESCRIPTION */ /* */ /* This function performs error checking on the parameters supplied */ /* to the I/O driver suspend function. */ /* */ /* CALLED BY */ /* */ /* Application */ /* */ /* CALLS */ /* */ /* IOC_Suspend_Driver Actual driver suspend routine*/ /* TCCE_Suspend_Error Check for a legal suspension */ /* */ /* INPUTS */ /* */ /* terminate_routine Termination/Timeout cleanup */ /* routine */ /* information Information pointer of the */ /* cleanup routine */ /* timeout Suspension timeout request */ /* */ /* OUTPUTS */ /* */ /* NU_INVALID_SUSPEND Indicates suspension is not */ /* legal */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Changed function interface, */ /* resulting in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS IOCE_Suspend_Driver(VOID (*terminate_routine)(VOID *), VOID *information, UNSIGNED timeout) { STATUS status; /* Completion status */ /* Determine if there is a suspension error. */ if (TCCE_Suspend_Error()) /* Suspension error, not called from a legal thread. */ status = NU_INVALID_SUSPEND; else /* Call the actual suspend service. */ status = IOC_Suspend_Driver(terminate_routine, information, timeout); /* Return the completion status. */ return(status); }