view src/g23m-aci/aci/ati_io.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  ATI
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  
+----------------------------------------------------------------------------- 
*/ 

#ifndef ATI_IO_C
#define ATI_IO_C

#undef DUMMY_ATI_STRINGS

#include "aci_all.h"
#include "aci.h"
#ifdef UART
#include "dti.h"      /* functionality of the dti library */
#endif
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_io.h"
#include "aci_cmd.h"
#include "l4_tim.h"

#include "aci_lst.h"

#ifdef UART
#include "dti_conn_mng.h"
#include "psa_uart.h"
#include "cmh_uart.h"
#endif

#include "ati_io.h"
#include "aci_mem.h"
#include "aci_fd.h"
#include "psa.h"
#include "cmh.h"

#include "cmh_cc.h"
#include "psa_cc.h"

#include "ati_int.h"

#if !defined (STRACE_LEN)
  #define STRACE_LEN 80
#endif

#define LIST_MAX_LENGTH 30

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
| STATE   : code                        ROUTINE : io_SendMessage     |
+--------------------------------------------------------------------+

  PURPOSE :
*/

GLOBAL void io_sendMessage(UBYTE srcId, CHAR *msg,
                           T_ATI_OUTPUT_TYPE output_type)
{
  T_ATI_SRC_PARAMS *src_params;

  src_params = find_element (ati_src_list, srcId, search_ati_src_id);
  if (src_params EQ NULL)
  {
    TRACE_EVENT_P1 ("[ERR] io_sendMessage: srcId=%d not found", srcId);
    return;
  }
  if (IS_INDICATION_OUTPUT (output_type))
  {
    io_sendIndication(srcId, msg, output_type);
    return;
  }
  else if (!IS_ECHO_OUTPUT ( output_type))   /* ECHO_OUTPUT must not be terminated      */
  {                                          /*  with CRLF, see definition in ati_cmh.h */
    output_type |= ATI_END_CRLF_OUTPUT;
  }

  if (src_params->result_cb NEQ NULL)
  {
    src_params->result_cb (srcId, output_type,
                           (UBYTE*)msg, (USHORT)strlen (msg));
  }
  else
  {
    TRACE_EVENT_P1 ("[WRN] io_sendMessage: no result callback srcId=%d",
                    srcId);

    if ( (strlen (msg)) >= STRACE_LEN )
    {
      /* terminate traced string if too long */
      msg[STRACE_LEN-1] = '\0';
    }

    TRACE_EVENT_P1 ("%s", msg);
  }
}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
| STATE   : code                        ROUTINE : io_SendMessageEx   |
+--------------------------------------------------------------------+

  PURPOSE :
*/

GLOBAL BOOL check_should_buffer_ind(T_ATI_SRC_PARAMS *src_params)
{  

  switch(src_params->buff_uns_mode)
  {
  case(NO_BUFF):
    break;

  case(BUFF_TYPING):
    if(src_params->cmd_state EQ CMD_TYPING)
    {
      TRACE_EVENT("check_should_buffer_ind(): cmd_state EQ CMD_TYPING");
      return(TRUE);
    }   
    break;

  case(BUFF_RUNNING):
    if(src_params->cmd_state NEQ CMD_IDLE )
    {
      TRACE_EVENT("check_should_buffer_ind(): cmd_state NEQ CMD_IDLE");
      return(TRUE);
    } 
    break;
  }
  return(FALSE); 
}

LOCAL void buffer_indication( T_ATI_SRC_PARAMS *src_params, 
                              CHAR *msg, 
                              T_ATI_OUTPUT_TYPE output_type )
{
  T_ATI_INDIC_BUFF *buff_indic_elem;
  CHAR *output;

  if(src_params->indication_buffer EQ NULL)
  {
    src_params->indication_buffer = new_list ();
  }
  
  ACI_MALLOC(output, (USHORT)(strlen(msg)+1));
  memcpy(output, msg, (USHORT)(strlen(msg)+1));

  ACI_MALLOC( buff_indic_elem, sizeof(T_ATI_INDIC_BUFF) );
  buff_indic_elem->output = output;
  buff_indic_elem->output_type = output_type;
  /* if list count is the maximum then the available elements are reused*/
  if(get_list_count(src_params->indication_buffer) >= LIST_MAX_LENGTH)
  {
    insert_shift_list(src_params->indication_buffer, buff_indic_elem);
  }
  else
  {
    insert_list( src_params->indication_buffer, buff_indic_elem);
  }

  if ( (strlen (msg)) >= STRACE_LEN )
  {
    /* terminate traced string if too long */
    msg[STRACE_LEN-1] = '\0';
  }

  TRACE_EVENT_P2("buffering on src %d: %s", src_params->src_id, msg);
}

GLOBAL void io_sendMessageEx (UBYTE srcId, CHAR *msg,
                             T_ATI_OUTPUT_TYPE output_type)
{
  T_ATI_SRC_PARAMS *src_params;

  src_params = find_element (ati_src_list, srcId, search_ati_src_id);
  if (src_params EQ NULL)
  {
    TRACE_EVENT_P1 ("[ERR] io_sendMessageEx: srcId=%d not found", srcId);
    return;
  }

  /*
   *  ATQ suppesses intermidiate, final and unsolicited result codes.
   *  Only information text in responce to commands is not affected.
   */
  if(IS_CONFIRM_OUTPUT(output_type))
  {
    io_setCommandState(src_params, ATI_LINE_STATE_END);
  }
  
  if (ati_user_output_cfg[srcId].atQ)
  {
    if(! IS_NORMAL_OUTPUT(output_type) AND ! IS_ECHO_OUTPUT(output_type))
    {
      return;
    }
  }
  
if ( IS_INDICATION_OUTPUT (output_type)
    AND check_should_buffer_ind(src_params) )
  {
    buffer_indication( src_params, msg, output_type );
    return;
  }

  if (src_params->result_cb NEQ NULL)
  {
    src_params->result_cb (srcId, output_type,
                           (UBYTE*)msg, (USHORT)strlen (msg));
  }
  else
  {
    TRACE_EVENT_P1 ("[WRN] io_sendMessageEx: no result callback srcId=%d",
                    srcId);

    if ( (strlen (msg)) >= STRACE_LEN )
    {
      /* terminate traced string if too long */
      msg[STRACE_LEN-1] = '\0';
    }

    TRACE_EVENT_P1 ("%s", msg);
  }
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
| STATE   : code                        ROUTINE : io_SendIndication  |
+--------------------------------------------------------------------+

  PURPOSE :
*/

GLOBAL void io_sendIndication(UBYTE srcId, CHAR *msg,
                              T_ATI_OUTPUT_TYPE output_type)
{
  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
    
  if (src_params EQ NULL)
  {
    TRACE_EVENT_P1 ("[ERR] io_sendIndication: srcId=%d not found", srcId);
    return;
  }

  /*
   *  ATQ suppesses intermidiate, final and unsolicited result codes.
   *  Only information text in responce to commands is not affected.
   */
  if (ati_user_output_cfg[srcId].atQ)
  {
    return;
  }

  output_type |= ATI_INDICATION_OUTPUT | 
                 ATI_BEGIN_CRLF_OUTPUT | 
                 ATI_END_CRLF_OUTPUT;

  if ( check_should_buffer_ind(src_params) )
  {
    buffer_indication( src_params, msg, output_type );
    return;
  }
  if (src_params->result_cb NEQ NULL)
  {
    src_params->result_cb (srcId, output_type,
                           (UBYTE*)msg, (USHORT)strlen (msg));
  }
  else
  {
    TRACE_EVENT_P1 ("[WRN] io_sendIndication: no result callback srcId=%d",
                    srcId);

    if ( (strlen (msg)) >= STRACE_LEN )
    {
      /* terminate traced string if too long */
      msg[STRACE_LEN-1] = '\0';
    }

    TRACE_EVENT_P1 ("%s", msg);
  }
}



/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
| STATE   : code                        ROUTINE : io_sendConfirm     |
+--------------------------------------------------------------------+

  PURPOSE : output to AT interface
*/

GLOBAL void send_buffered_indication( T_ATI_SRC_PARAMS *src_params )
{
  BOOL            go_on = TRUE;
  T_ATI_INDIC_BUFF *indic = src_params->indication_buffer; /* to be sure it's not NULL */

  TRACE_EVENT_P1("send buffered indications for source: %d", src_params->src_id);
  while( go_on )
  {
    indic = remove_first_element( src_params->indication_buffer ); 

    if( indic NEQ NULL )
    {
      io_sendIndication( src_params->src_id,
                         indic->output,
                         indic->output_type );
      ACI_MFREE( indic->output );
      ACI_MFREE( indic );    
    }
    else
    {
      ACI_MFREE( src_params->indication_buffer );
      src_params->indication_buffer = NULL;
      go_on = FALSE;
    }
  }
}
                                       
GLOBAL void io_sendConfirm(UBYTE srcId, CHAR *msg,
                           T_ATI_OUTPUT_TYPE output_type)
{
  BOOL is_CONNECT = FALSE;
  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);

  TRACE_FUNCTION("io_sendConfirm()");

  if (src_params EQ NULL)
  {
    TRACE_EVENT_P1 ("[ERR] io_sendConfirm: srcId=%d not found", srcId);
    return;
  }

  if (BITFIELD_CHECK (output_type, ATI_CONNECT_OUTPUT))
  {
    is_CONNECT = TRUE;
    BITFIELD_CLEAR (output_type, ATI_CONNECT_OUTPUT);/*lint !e64 (Warning: type mismatch)*/
  }

  output_type |= ATI_CONFIRM_OUTPUT    | 
                 ATI_BEGIN_CRLF_OUTPUT | 
                 ATI_END_CRLF_OUTPUT;

  if (src_params->result_cb NEQ NULL)
  {
    /*
     *  ATQ suppesses intermidiate, final and unsolicited result codes.
     *  Only information text in responce to commands is not affected.
     */
    if (ati_user_output_cfg[srcId].atQ EQ 0)
    {
      src_params->result_cb (srcId, output_type,
                             (UBYTE*)msg, (USHORT)strlen (msg));
    }
  }
  else
  {
    TRACE_EVENT_P1 ("[WRN] io_sendConfirm: no result callback srcId=%d",
                    srcId);

    if ( (strlen (msg)) >= STRACE_LEN )
    {
      /* terminate traced string if too long */
      msg[STRACE_LEN-1] = '\0';
    }

    TRACE_EVENT_P1 ("%s", msg);
  }

  io_setCommandState(src_params, ATI_LINE_STATE_END);
  trace_cmd_state(src_params->src_id, src_params->cmd_state, CMD_IDLE);
  src_params->cmd_state = CMD_IDLE;

  if ((src_params->indication_buffer NEQ NULL) /* send buffered indications */
    AND (is_CONNECT EQ FALSE))                  /* but for data call not yet --> when back in CMD mode */
  {
    send_buffered_indication( src_params );
  }
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_DTIS                |
|                                 ROUTINE : io_sendChar             |
+-------------------------------------------------------------------+

  PURPOSE : send one character through DTI
*/

GLOBAL void io_sendChar (CHAR out, UBYTE srcId)
{
  T_ATI_SRC_PARAMS *src_params;

  src_params = find_element (ati_src_list, srcId, search_ati_src_id);
  if (src_params EQ NULL)
  {
    TRACE_EVENT_P1 ("[ERR] io_sendChar: srcId=%d not found", srcId);
    return;
  }
  if (src_params->result_cb NEQ NULL)
  {
    src_params->result_cb (srcId, ATI_ECHO_OUTPUT, (UBYTE*)&out, 1);
  }
  else
  {
    TRACE_EVENT_P1 ("[WRN] io_sendChar: no result callback srcId=%d",
                    srcId);
  }
}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : ACI_URT            |
| STATE   : code                        ROUTINE : io_setRngInd       |
+--------------------------------------------------------------------+

  PURPOSE: sets the V.24 ring indicator line

*/
GLOBAL void io_setRngInd (T_IO_RING_STAT state, T_ACI_CRING_SERV_TYP bt1, T_ACI_CRING_SERV_TYP bt2)
{
  T_ATI_SRC_PARAMS *src_params;
  T_IO_RING_PARAMS ring_params;

  src_params = get_next_element (ati_src_list, NULL);
  while (src_params NEQ NULL)
  {
    if (src_params->line_state_cb NEQ NULL)
    {
      ring_params.ring_stat = state;
      ring_params.b_cap_1 = bt1;
      ring_params.b_cap_2 = bt2;

      src_params->line_state_cb (src_params->src_id, 
                                 ATI_LINE_STATE_RNG, 
                                 (ULONG)&ring_params);
    }
    src_params = get_next_element (ati_src_list, src_params);
  }
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : ACI_URT            |
| STATE   : code                        ROUTINE : io_setDCD          |
+--------------------------------------------------------------------+

  PURPOSE: sets the V.24 data carrier detect line

*/
#ifdef UART
GLOBAL void io_setDCD (T_ACI_CMD_SRC src_id, T_IO_DCD_STAT state)
{
  T_ATI_SRC_PARAMS *src_params;
  T_ACI_DCD_MOD     ATandC_setting;
  
  TRACE_FUNCTION("io_setDCD()");

  src_params = find_element (ati_src_list, (UBYTE)src_id, search_ati_src_id);
  if (src_params EQ NULL)
  {
    TRACE_EVENT_P1 ("[ERR] io_setDCD: srcId=%d not found", src_id);
    return;
  }
  
  qAT_AndC(src_id, &ATandC_setting);
                                    
  /* don't set DCD off if DCD shall be allways on */
  if( (ATandC_setting EQ DCD_ALWAYS_ON) AND
      (state EQ IO_DCD_OFF ) )
  {
    TRACE_EVENT ("[DBG] io_setDCD: DCD_ALWAYS_ON");
    return;
  }

  if (src_params->line_state_cb NEQ NULL)
  {
    src_params->line_state_cb ((UBYTE)src_id, ATI_LINE_STATE_DCD, (ULONG)state);
  }
  else
  {
    TRACE_EVENT_P1 ("[WRN] io_setDCD: no callback for srcId=%d", src_id);
  }
}
#endif /* UART */
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : ACI_URT            |
| STATE   : code                        ROUTINE : io_setCommandState |
+--------------------------------------------------------------------+

  PURPOSE: sets the command state to start or end

*/
#define UNUSED_ULONG_PARAMETER (ULONG) 0L

GLOBAL void io_setCommandState(T_ATI_SRC_PARAMS *src_params, T_ATI_LINE_STATE_TYPE line_state_type)
{

  TRACE_FUNCTION("io_setCommandState()");

  if (src_params->line_state_cb NEQ NULL)
  {
    src_params->line_state_cb (src_params->src_id, line_state_type, UNUSED_ULONG_PARAMETER);
  }
  else
  {
    TRACE_EVENT_P1 ("[WRN] io_setCommandState: no callback for srcId=%d",
                    src_params->src_id);
  }
}

#endif /* ATI_IO_C */