view src/cs/riviera/rvm/rvm_priorities.h @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents eacfad198b8b
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  Name        rvm_priorities.h                                            */
/*                                                                          */
/*  Function    this file priorities defintitions for basic SWEs	    */
/*		It includes a file rvm_ext_priorities.h where are defined   */
/*		"custom" priorities.					    */
/*                                                                          */
/*  Version	0.1							    */
/*									    */
/*  Date       	Modification						    */
/*  ------------------------------------				    */
/*  10/11/2000	Create							    */
/*									    */
/*  Author	Cristian Livadiotti (c-livadiotti@ti.com)		    */
/*									    */
/* (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/

#ifndef __RVM_PRIORITIES_H_
#define __RVM_PRIORITIES_H_


#include "rvm/rvm_ext_priorities.h"

/* PRIORITIES SETTING:                        */
/* All user priority should be set under 250: */
/* Higher values are reserved                 */

/*
** Bluetooth Priorities:
** All set to same value, except ATP (not a task) and HCI (valid on PC only)
*/
#define		RVM_HCI_TASK_PRIORITY			(250)
#define		RVM_L2CAP_TASK_PRIORITY			(240)
#define		RVM_BTCTRL_TASK_PRIORITY		(240)
#define		RVM_RFCOMM_TASK_PRIORITY		(240)
#define		RVM_SPP_TASK_PRIORITY			(240)
#define		RVM_SDP_TASK_PRIORITY			(240)
#define		RVM_HSG_TASK_PRIORITY			(240)
#define		RVM_DUN_GW_TASK_PRIORITY		(240)
#define		RVM_FAX_GW_TASK_PRIORITY		(240)
#define		RVM_ATP_UART_TASK_PRIORITY		(240)
#define		RVM_ATP_TASK_PRIORITY			(255)


/*
** Drivers and Services Priorities
** Note: FFS priority should be lower than every user
*/
#define		RVM_SPI_TASK_PRIORITY			(39)
#define		RVM_FCHG_TASK_PRIORITY			(80)
#define		RVM_TTY_TASK_PRIORITY			(238)
#define		RVM_AUDIO_TASK_PRIORITY			(245)
#define		RVM_AUDIO_BGD_TASK_PRIORITY		(246)
#define		RVM_RTC_TASK_PRIORITY			(248)
#define		RVM_FFS_TASK_PRIORITY			(250)
#define		RVM_TRACE_TASK_PRIORITY			(251) //(79)
#define		RVM_DAR_TASK_PRIORITY			(245)
#define		RVM_ETM_TASK_PRIORITY			(249)
#define		RVM_LCC_TASK_PRIORITY			(246)
#define		RVM_MKS_TASK_PRIORITY			(255)
#define		RVM_KPD_TASK_PRIORITY			(10)

#define		RVM_MPM_TASK_PRIORITY			(242)

#define		RVM_RNET_WS_TASK_PRIORITY		(240)
#define		RVM_RNET_RT_TASK_PRIORITY		(240)
#define		RVM_DCM_TASK_PRIORITY			(240)
#define		RVM_MFW_TASK_PRIORITY			(241)
#define		RVM_MDL_TASK_PRIORITY           	(241)


#define		RVM_OBIGO_TASK_PRIORITY			(242)
#define		RVM_IMG_TASK_PRIORITY			(241)
#define		RVM_MMS_TASK_PRIORITY			(247)

/*
** RV Test Menu and Dummy Tasks Priorities
*/
#define		RVM_RVTEST_MENU_TASK_PRIORITY		(240)
#define		RVM_DUMMY_TASK_PRIORITY			(80)
//#define	IDLE_TASK_PRIORITY			(80)  /* A-M-E-N-D-E-D! */
#define		RVM_INVKR_TASK_PRIORITY			(240) /* A-M-E-N-D-E-D! */
#define		RVM_TE1_TASK_PRIORITY			(240) /* A-M-E-N-D-E-D! */
#define		RVM_TE2_TASK_PRIORITY			(240) /* A-M-E-N-D-E-D! */
#define		RVM_TE3_TASK_PRIORITY			(240) /* A-M-E-N-D-E-D! */
#define		RVM_TE4_TASK_PRIORITY			(240) /* A-M-E-N-D-E-D! */
#define		RVM_TE5_TASK_PRIORITY			(240) /* A-M-E-N-D-E-D! */
#define		RVM_TE6_TASK_PRIORITY			(240) /* A-M-E-N-D-E-D! */

#define		RVM_TMS_TASK_PRIORITY			(200) /* A-M-E-N-D-E-D! */
#endif /* __RVM_PRIORITIES_H_ */