FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/include/l1_signa.h @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 08 Jun 2023 08:23:37 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1_SIGNA.H * * Filename l1_signa.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #define P_L1C 0 #define P_DLL ( P_L1C + 1 ) // Messages Test/PWRMNGT <-> L1A #if (OP_L1_STANDALONE == 1) /* Message used for hardware dynamic configuration */ #define TST_HW_CONFIG_REQ ( ( P_L1C << 8 ) | 116) #endif #define TST_TEST_HW_REQ ( ( P_L1C << 8 ) | 1 ) #define TST_TEST_HW_CON ( ( P_L1C << 8 ) | 2 ) #define TST_TIMESTAMP_MSG ( ( P_L1C << 8 ) | 3 ) #define TST_SLEEP_REQ ( ( P_L1C << 8 ) | 4 ) // Messages L3 <-> L1A #define MPHC_RXLEV_REQ ( ( P_L1C << 8 ) | 11 ) #define MPHC_RXLEV_IND ( ( P_L1C << 8 ) | 12 ) #define MPHC_STOP_RXLEV_REQ ( ( P_L1C << 8 ) | 13 ) #define MPHC_STOP_RXLEV_CON ( ( P_L1C << 8 ) | 14 ) #define MPHC_NETWORK_SYNC_REQ ( ( P_L1C << 8 ) | 15 ) #define MPHC_NETWORK_SYNC_IND ( ( P_L1C << 8 ) | 16 ) #define MPHC_STOP_NETWORK_SYNC_REQ ( ( P_L1C << 8 ) | 17 ) #define MPHC_STOP_NETWORK_SYNC_CON ( ( P_L1C << 8 ) | 18 ) #define MPHC_NEW_SCELL_REQ ( ( P_L1C << 8 ) | 19 ) #define MPHC_NEW_SCELL_CON ( ( P_L1C << 8 ) | 20 ) #define MPHC_START_CCCH_REQ ( ( P_L1C << 8 ) | 21 ) #define MPHC_STOP_CCCH_REQ ( ( P_L1C << 8 ) | 22 ) #define MPHC_STOP_CCCH_CON ( ( P_L1C << 8 ) | 23 ) #define MPHC_SCELL_NBCCH_REQ ( ( P_L1C << 8 ) | 24 ) #define MPHC_SCELL_EBCCH_REQ ( ( P_L1C << 8 ) | 25 ) #define MPHC_STOP_SCELL_BCCH_REQ ( ( P_L1C << 8 ) | 26 ) #define MPHC_STOP_SCELL_BCCH_CON ( ( P_L1C << 8 ) | 27 ) #define MPHC_NCELL_BCCH_REQ ( ( P_L1C << 8 ) | 28 ) #define MPHC_NCELL_BCCH_IND ( ( P_L1C << 8 ) | 29 ) #define MPHC_STOP_NCELL_BCCH_REQ ( ( P_L1C << 8 ) | 30 ) #define MPHC_STOP_NCELL_BCCH_CON ( ( P_L1C << 8 ) | 31 ) #define MPHC_NCELL_SYNC_REQ ( ( P_L1C << 8 ) | 32 ) #define MPHC_NCELL_SYNC_IND ( ( P_L1C << 8 ) | 33 ) #define MPHC_STOP_NCELL_SYNC_REQ ( ( P_L1C << 8 ) | 34 ) #define MPHC_STOP_NCELL_SYNC_CON ( ( P_L1C << 8 ) | 35 ) #define MPHC_RXLEV_PERIODIC_REQ ( ( P_L1C << 8 ) | 36 ) #define MPHC_RXLEV_PERIODIC_IND ( ( P_L1C << 8 ) | 37 ) #define MPHC_STOP_RXLEV_PERIODIC_REQ ( ( P_L1C << 8 ) | 38 ) #define MPHC_STOP_RXLEV_PERIODIC_CON ( ( P_L1C << 8 ) | 39 ) #define MPHC_CONFIG_CBCH_REQ ( ( P_L1C << 8 ) | 40 ) #define MPHC_CBCH_SCHEDULE_REQ ( ( P_L1C << 8 ) | 41 ) #define MPHC_CBCH_UPDATE_REQ ( ( P_L1C << 8 ) | 42 ) #define MPHC_CBCH_INFO_REQ ( ( P_L1C << 8 ) | 43 ) #define MPHC_STOP_CBCH_REQ ( ( P_L1C << 8 ) | 44 ) #define MPHC_STOP_CBCH_CON ( ( P_L1C << 8 ) | 45 ) #define MPHC_RA_REQ ( ( P_L1C << 8 ) | 46 ) #define MPHC_RA_CON ( ( P_L1C << 8 ) | 47 ) #define MPHC_STOP_RA_REQ ( ( P_L1C << 8 ) | 48 ) #define MPHC_STOP_RA_CON ( ( P_L1C << 8 ) | 49 ) #define MPHC_DATA_IND ( ( P_L1C << 8 ) | 50 ) #define MPHC_IMMED_ASSIGN_REQ ( ( P_L1C << 8 ) | 51 ) #define MPHC_CHANNEL_ASSIGN_REQ ( ( P_L1C << 8 ) | 52 ) #define MPHC_ASYNC_HO_REQ ( ( P_L1C << 8 ) | 53 ) #define MPHC_SYNC_HO_REQ ( ( P_L1C << 8 ) | 54 ) #define MPHC_PRE_SYNC_HO_REQ ( ( P_L1C << 8 ) | 55 ) #define MPHC_PSEUDO_SYNC_HO_REQ ( ( P_L1C << 8 ) | 56 ) #define MPHC_STOP_DEDICATED_REQ ( ( P_L1C << 8 ) | 57 ) #define MPHC_STOP_DEDICATED_CON ( ( P_L1C << 8 ) | 128 ) #define MPHC_CHANGE_FREQUENCY_CON ( ( P_L1C << 8 ) | 58 ) #define MPHC_ASYNC_HO_CON ( ( P_L1C << 8 ) | 59 ) #define MPHC_CHANNEL_ASSIGN_CON ( ( P_L1C << 8 ) | 60 ) #define MPHC_CHANNEL_MODE_MODIFY_CON ( ( P_L1C << 8 ) | 61 ) #define MPHC_HANDOVER_FAIL_CON ( ( P_L1C << 8 ) | 62 ) #define MPHC_IMMED_ASSIGN_CON ( ( P_L1C << 8 ) | 63 ) #define MPHC_PRE_SYNC_HO_CON ( ( P_L1C << 8 ) | 64 ) #define MPHC_SET_CIPHERING_CON ( ( P_L1C << 8 ) | 65 ) #define MPHC_SYNC_HO_CON ( ( P_L1C << 8 ) | 66 ) #define MPHC_TA_FAIL_IND ( ( P_L1C << 8 ) | 67 ) #define MPHC_HANDOVER_FINISHED ( ( P_L1C << 8 ) | 68 ) #define MPHC_CHANGE_FREQUENCY ( ( P_L1C << 8 ) | 69 ) #define MPHC_CHANNEL_MODE_MODIFY_REQ ( ( P_L1C << 8 ) | 70 ) #define MPHC_HANDOVER_FAIL_REQ ( ( P_L1C << 8 ) | 71 ) #define MPHC_SET_CIPHERING_REQ ( ( P_L1C << 8 ) | 72 ) #define MPHC_MEAS_REPORT ( ( P_L1C << 8 ) | 73 ) #define MPHC_UPDATE_BA_LIST ( ( P_L1C << 8 ) | 74 ) #define MPHC_NCELL_FB_SB_READ ( ( P_L1C << 8 ) | 75 ) #define MPHC_NCELL_SB_READ ( ( P_L1C << 8 ) | 76 ) #define MPHC_NCELL_BCCH_READ ( ( P_L1C << 8 ) | 77 ) // Messages L1S -> L1A #define L1C_VALID_MEAS_INFO ( ( P_L1C << 8 ) | 80 ) #define L1C_FB_INFO ( ( P_L1C << 8 ) | 81 ) #define L1C_SB_INFO ( ( P_L1C << 8 ) | 82 ) #define L1C_SBCONF_INFO ( ( P_L1C << 8 ) | 83 ) #define L1C_BCCHS_INFO ( ( P_L1C << 8 ) | 84 ) #define L1C_BCCHN_INFO ( ( P_L1C << 8 ) | 85 ) #define L1C_NP_INFO ( ( P_L1C << 8 ) | 86 ) #define L1C_EP_INFO ( ( P_L1C << 8 ) | 87 ) #define L1C_ALLC_INFO ( ( P_L1C << 8 ) | 88 ) #define L1C_RXLEV_PERIODIC_DONE ( ( P_L1C << 8 ) | 89 ) #define L1C_CB_INFO ( ( P_L1C << 8 ) | 90 ) #define L1C_RA_DONE ( ( P_L1C << 8 ) | 91 ) #define L1C_SACCH_INFO ( ( P_L1C << 8 ) | 92 ) #define L1C_MEAS_DONE ( ( P_L1C << 8 ) | 93 ) #define L1C_DEDIC_DONE ( ( P_L1C << 8 ) | 94 ) #define L1C_HANDOVER_FINISHED ( ( P_L1C << 8 ) | 95 ) #define L1C_REDEF_DONE ( ( P_L1C << 8 ) | 96 ) #define L1C_STOP_DEDICATED_DONE ( ( P_L1C << 8 ) | 129 ) // Messages O&M <-> L1A #define OML1_CLOSE_TCH_LOOP_REQ ( ( P_L1C << 8 ) | 97 ) #define OML1_OPEN_TCH_LOOP_REQ ( ( P_L1C << 8 ) | 98 ) #define OML1_START_DAI_TEST_REQ ( ( P_L1C << 8 ) | 99 ) #define OML1_STOP_DAI_TEST_REQ ( ( P_L1C << 8 ) | 100 ) #define OML1_CLOSE_TCH_LOOP_CON ( ( P_L1C << 8 ) | 101 ) #define OML1_OPEN_TCH_LOOP_CON ( ( P_L1C << 8 ) | 102 ) #define OML1_START_DAI_TEST_CON ( ( P_L1C << 8 ) | 103 ) #define OML1_STOP_DAI_TEST_CON ( ( P_L1C << 8 ) | 104 ) // Message Custom I/F <- L1S #define CST_ADC_RESULT ( ( P_L1C << 8 ) | 105 ) // Messages for trace #define L1_STATS_REQ ( ( P_L1C << 8 ) | 107 ) #define L1_DUMMY_FOR_SIM ( ( P_L1C << 8 ) | 108 ) #define TRACE_DSP_DEBUG ( ( P_L1C << 8 ) | 106 ) #define TRACE_CONFIG ( ( P_L1C << 8 ) | 123 ) #define TRACE_CONDENSED_PDTCH ( ( P_L1C << 8 ) | 124 ) #define TRACE_INFO ( ( P_L1C << 8 ) | 125 ) #define QUICK_TRACE ( ( P_L1C << 8 ) | 126 ) #define TRACE_DSP_AMR_DEBUG ( ( P_L1C << 8 ) | 127 ) #define MPHC_NETWORK_LOST_IND ( ( P_L1C << 8 ) | 110 ) // Messages MMI <-> L1A #define MMI_ADC_REQ ( ( P_L1C << 8 ) | 111 ) #define MMI_STOP_ADC_REQ ( ( P_L1C << 8 ) | 112 ) #define MMI_STOP_ADC_CON ( ( P_L1C << 8 ) | 113 ) #define L1_TEST_HW_INFO ( ( P_L1C << 8 ) | 119 ) // Multi-band selection E-GSM900/DCS1800/PCS1900/GSM850 #define MPHC_INIT_L1_REQ ( ( P_L1C << 8 ) | 114 ) #define MPHC_INIT_L1_CON ( ( P_L1C << 8 ) | 115 ) // MEssage RR -> L1A for Enhanced meas. #if (L1_12NEIGH ==1) #define MPHC_NCELL_LIST_SYNC_REQ ( ( P_L1C << 8 ) | 122 ) #endif // Messages L2 <-> L1A #define PH_DATA_IND ( ( P_DLL << 8 ) | 109 )