FreeCalypso > hg > fc-tourmaline

view src/cs/layer1/include/l1_rtt_macro.h @ 303:f76436d19a7a default tip

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software 
 * L1_RTT_MACRO.H
 *
 *        Filename %M%
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

#if (defined RVM_RTT_SWE || (OP_L1_STANDALONE == 1))

#include "rvt_gen.h"
#include "rtt_gen.h"

extern T_TRACE_INFO_STRUCT trace_info;
                                                                    
/***********************************************************************************************************/
/* Macro for cell enabling checking                                                                        */
/***********************************************************************************************************/

#define SELECTED_BITMAP(enable_bit) \
  enable_bit < 32  ? (0x0001 << (enable_bit -   0)) & trace_info.current_config->rttl1_cell_enable[0] : \
  enable_bit < 64  ? (0x0001 << (enable_bit -  32)) & trace_info.current_config->rttl1_cell_enable[1] : \
  enable_bit < 96  ? (0x0001 << (enable_bit -  64)) & trace_info.current_config->rttl1_cell_enable[2] : \
  enable_bit < 128 ? (0x0001 << (enable_bit -  96)) & trace_info.current_config->rttl1_cell_enable[3] : \
  enable_bit < 160 ? (0x0001 << (enable_bit - 128)) & trace_info.current_config->rttl1_cell_enable[4] : \
  enable_bit < 192 ? (0x0001 << (enable_bit - 160)) & trace_info.current_config->rttl1_cell_enable[5] : \
  enable_bit < 224 ? (0x0001 << (enable_bit - 192)) & trace_info.current_config->rttl1_cell_enable[6] : \
                     (0x0001 << (enable_bit - 224)) & trace_info.current_config->rttl1_cell_enable[7]

/***********************************************************************************************************/
/* Macros for buffer filling                                                                               */
/***********************************************************************************************************/

//-----------------------------------------------------------------------------------------------------------
// L1 RTT cell filling: FN
                                     
#define RTTL1_FILL_FN(param1) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_FN)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_FN))) != NULL) \
      { \
        ((T_RTTL1_FN *)ptr)->fn          = param1; \
        ((T_RTTL1_FN *)ptr)->cell_id     = RTTL1_ENABLE_FN; \
      } \
  }

//-----------------------------------------------------------------------------------------------------------
// L1 RTT cell filling: Downlink burst
                                     
#define RTTL1_FILL_DL_BURST(param1,param2,param3,param4,param5,param6,param7) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_BURST))                                                                  \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_BURST))) != NULL) \
      { \
        ((T_RTTL1_DL_BURST *)ptr)->angle       = param1; \
        ((T_RTTL1_DL_BURST *)ptr)->snr         = param2; \
        ((T_RTTL1_DL_BURST *)ptr)->afc         = param3; \
        ((T_RTTL1_DL_BURST *)ptr)->task        = param4; \
        ((T_RTTL1_DL_BURST *)ptr)->pm          = param5; \
        ((T_RTTL1_DL_BURST *)ptr)->toa         = param6; \
        ((T_RTTL1_DL_BURST *)ptr)->input_level = param7; \
        ((T_RTTL1_DL_BURST *)ptr)->cell_id     = RTTL1_ENABLE_DL_BURST; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink Normal Burst                                                                   
                                                                                                              
#define RTTL1_FILL_UL_NB(param1, param2, param3) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_NB)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_NB))) != NULL) \
      { \
        ((T_RTTL1_UL_NB *)ptr)->task    = param1; \
        ((T_RTTL1_UL_NB *)ptr)->ta      = param2; \
        ((T_RTTL1_UL_NB *)ptr)->txpwr   = param3; \
        ((T_RTTL1_UL_NB *)ptr)->cell_id = RTTL1_ENABLE_UL_NB; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink Access Burst                                                                   
                                                                                                              
#define RTTL1_FILL_UL_AB(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_AB)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_AB))) != NULL) \
      { \
        ((T_RTTL1_UL_AB *)ptr)->task    = param1; \
        ((T_RTTL1_UL_AB *)ptr)->txpwr   = param2; \
        ((T_RTTL1_UL_AB *)ptr)->cell_id = RTTL1_ENABLE_UL_AB; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Full list measurement                                                                           
                                                                                                              
#define RTTL1_FILL_FULL_LIST_MEAS(param1, param2, param3, param4) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_FULL_LIST_MEAS)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_FULL_LIST_MEAS))) != NULL) \
      {                                                                                                       \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->pm          = param1; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->input_level = param2; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->task        = param3; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->radio_freq  = param4; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->cell_id     = RTTL1_ENABLE_FULL_LIST_MEAS; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Full list measurement                                                                           
                                                                                                              
#define RTTL1_FILL_MON_MEAS(param1, param2, param3, param4) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_MON_MEAS)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_MON_MEAS))) != NULL) \
      { \
        ((T_RTTL1_MON_MEAS *)ptr)->pm          = param1; \
        ((T_RTTL1_MON_MEAS *)ptr)->input_level = param2; \
        ((T_RTTL1_MON_MEAS *)ptr)->task        = param3; \
        ((T_RTTL1_MON_MEAS *)ptr)->radio_freq  = param4; \
        ((T_RTTL1_MON_MEAS *)ptr)->cell_id     = RTTL1_ENABLE_MON_MEAS; \
      } \
  }                                                                                                           

//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Downlink DCCH block                                                                   
                                                                                                              
#define RTTL1_FILL_DL_DCCH(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_DCCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_DCCH))) != NULL) \
      { \
        ((T_RTTL1_DL_DCCH *)ptr)->valid_flag    = param1; \
        ((T_RTTL1_DL_DCCH *)ptr)->physical_info = param2; \
        ((T_RTTL1_DL_DCCH *)ptr)->cell_id       = RTTL1_ENABLE_DL_DCCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Downlink PTCCH block                                                                  
                                                                                                              
#define RTTL1_FILL_DL_PTCCH(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_PTCCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_PTCCH))) != NULL) \
      { \
        ((T_RTTL1_DL_PTCCH *)ptr)->crc        = param1; \
        ((T_RTTL1_DL_PTCCH *)ptr)->ordered_ta = param2; \
        ((T_RTTL1_DL_PTCCH *)ptr)->cell_id    = RTTL1_ENABLE_DL_PTCCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink DCCH block                                                                     
                                                                                                              
#define RTTL1_FILL_UL_DCCH \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_DCCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_DCCH))) != NULL) \
      { \
        ((T_RTTL1_UL_DCCH *)ptr)->cell_id = RTTL1_ENABLE_UL_DCCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink SACCH block                                                                    
                                                                                                              
#define RTTL1_FILL_UL_SACCH(param1, param2, param3) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_SACCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_SACCH))) != NULL) \
      { \
        ((T_RTTL1_UL_SACCH *)ptr)->data_present   = param1; \
        ((T_RTTL1_UL_SACCH *)ptr)->reported_ta    = param2; \
        ((T_RTTL1_UL_SACCH *)ptr)->reported_txpwr = param3; \
        ((T_RTTL1_UL_SACCH *)ptr)->cell_id        = RTTL1_ENABLE_UL_SACCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Downlink PDTCH block                                                                  
                                                                                                              
#define RTTL1_FILL_DL_PDTCH(param1, param2, param3, param4, param5) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_PDTCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_PDTCH))) != NULL) \
      { \
        ((T_RTTL1_DL_PDTCH *)ptr)->mac_header = param1; \
        ((T_RTTL1_DL_PDTCH *)ptr)->tfi_result = param2; \
        ((T_RTTL1_DL_PDTCH *)ptr)->crc        = param3; \
        ((T_RTTL1_DL_PDTCH *)ptr)->cs_type    = param4; \
        ((T_RTTL1_DL_PDTCH *)ptr)->timeslot   = param5; \
        ((T_RTTL1_DL_PDTCH *)ptr)->cell_id    = RTTL1_ENABLE_DL_PDTCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink PDTCH block                                                                    
                                                                                                              
#define RTTL1_FILL_UL_PDTCH(param1, param2, param3) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_PDTCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_PDTCH))) != NULL) \
      { \
        ((T_RTTL1_UL_PDTCH *)ptr)->cs_type      = param1; \
        ((T_RTTL1_UL_PDTCH *)ptr)->data_allowed = param2; \
        ((T_RTTL1_UL_PDTCH *)ptr)->timeslot     = param3; \
        ((T_RTTL1_UL_PDTCH *)ptr)->cell_id      = RTTL1_ENABLE_UL_PDTCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: MAC-S error                                                                           
                                                                                                              
#define RTTL1_FILL_MACS_STATUS(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_MACS_STATUS)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_MACS_STATUS))) != NULL) \
      { \
        ((T_RTTL1_MACS_STATUS *)ptr)->status   = param1; \
        ((T_RTTL1_MACS_STATUS *)ptr)->timeslot = param2; \
        ((T_RTTL1_MACS_STATUS *)ptr)->cell_id  = RTTL1_ENABLE_MACS_STATUS; \
      } \
  }

//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: L1S task enable                                                                       
                                                                                                              
#define RTTL1_FILL_L1S_TASK_ENABLE(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_L1S_TASK_ENABLE)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_L1S_TASK_ENABLE))) != NULL) \
      { \
        ((T_RTTL1_L1S_TASK_ENABLE *)ptr)->bitmap1  = param1; \
        ((T_RTTL1_L1S_TASK_ENABLE *)ptr)->bitmap2  = param2; \
        ((T_RTTL1_L1S_TASK_ENABLE *)ptr)->cell_id  = RTTL1_ENABLE_L1S_TASK_ENABLE; \
      } \
  }

//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: MFTAB trace                                                                       
                                                                                                              
#define RTTL1_FILL_MFTAB(param1) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_MFTAB)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_MFTAB))) != NULL) \
      { \
        ((T_RTTL1_MFTAB *)ptr)->func     = param1; \
        ((T_RTTL1_MFTAB *)ptr)->cell_id  = RTTL1_ENABLE_MFTAB; \
      } \
  }

/***********************************************************************************************************/ 
/* Macro for events                                                                                        */ 
/***********************************************************************************************************/
                                                                                                              
#define RTTL1_EVENT(id,size) \
  if (trace_info.current_config->rttl1_event_enable & (0x1 << id)) \
    trace_info.l1s_rtt_func.rtt_dump_buffer(trace_info.l1s_trace_user_id, size);
#else // RVM_RTT_SWE || OP_L1_STANDALONE

// No RTT: all macros are empty
#define SELECTED_BITMAP(enable_bit) (0)                                   
#define RTTL1_FILL_FN(param1)                                      
#define RTTL1_FILL_DL_BURST(param1,param2,param3,param4,param5,param6,param7)                                                                                                               
#define RTTL1_FILL_UL_NB(param1, param2, param3)                                                                                                               
#define RTTL1_FILL_UL_AB(param1, param2)                                                                                                               
#define RTTL1_FILL_FULL_LIST_MEAS(param1, param2, param3, param4)                                                                                                               
#define RTTL1_FILL_MON_MEAS(param1, param2, param3, param4)                                                                                                               
#define RTTL1_FILL_DL_DCCH(param1, param2)                                                                                                               
#define RTTL1_FILL_DL_PTCCH(param1, param2)                                                                                                               
#define RTTL1_FILL_UL_DCCH                                                                                                               
#define RTTL1_FILL_UL_SACCH(param1, param2, param3)                                                                                                              
#define RTTL1_FILL_DL_PDTCH(param1, param2, param3, param4, param5)                                                                                                              
#define RTTL1_FILL_UL_PDTCH(param1, param2, param3)                                                                                                              
#define RTTL1_FILL_MACS_STATUS(param1, param2)                                                                                                              
#define RTTL1_FILL_L1S_TASK_ENABLE(param1, param2)                                                                                                              
#define RTTL1_FILL_MFTAB(param1)
#define RTTL1_EVENT(id,size)

#endif // RVM_RTT_SWE || OP_L1_STANDALONE