FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/cfile/l1_small_asm.S @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 08 Jun 2023 08:23:37 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/* * Assembly code extracted out of TI's l1_small.c * * This code is correct ONLY for CHIPSET 10 or 11 as currently used * by FreeCalypso; see TI's original code for what changes would be * needed to support other CHIPSETs. */ .text .code 32 /*-------------------------------------------------------*/ /* _GSM_Small_Sleep */ /* (formerly INT_Small_Sleep) */ /*-------------------------------------------------------*/ /* */ /* Description: small sleep */ /* ------------ */ /* Called by TCT_Schedule main loop of Nucleus */ /*-------------------------------------------------------*/ #define SMALL_SLEEP 0x01 #define ALL_SLEEP 0x04 #define BIG_SMALL_SLEEP 0x05 #define PWR_MNGT 0x01 .globl _GSM_Small_Sleep _GSM_Small_Sleep: ldr r0,Switch ldr r0,[r0] ldrb r1,[r0] cmp r1,#PWR_MNGT bne TCT_Schedule_Loop ldr r0,Mode ldr r0,[r0] ldrb r1,[r0] cmp r1,#SMALL_SLEEP beq Small_sleep_ok cmp r1,#ALL_SLEEP beq Small_sleep_ok cmp r1,#BIG_SMALL_SLEEP bne TCT_Schedule_Loop Small_sleep_ok: // ***************************************************** //reset the DEEP_SLEEP bit 12 of CNTL_ARM_CLK register // (Cf BUG_1278) ldr r0,addrCLKM @ pick up CNTL_ARM_CLK register address ldrh r1,[r0] @ take the current value of the register orr r1,r1,#0x1000 @ reset the bit strh r1,[r0] @ store the result ldr r0,addrCLKM @ pick up CLKM clock register address ldrh r1,[r0] @ take the current value of the register bic r1,r1,#1 @ disable ARM clock strh r1,[r0] B TCT_Schedule_Loop @ Return to TCT_Schedule main loop addrCLKM: .word 0xfffffd00 @ CLKM clock register address Mode: .word mode_authorized Switch: .word switch_PWR_MNGT