FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_app/r2d/lcd_gsm_ps_api.c @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/****************************************************************************/ /* */ /* File Name: lcd_gsm_ps_api.c */ /* */ /* Purpose: This file contains the adaptation layer used to direct */ /* Condat LCD calls to void or not */ /* */ /* Version 0.1 */ /* */ /* Date Modification */ /* ------------------------------------ */ /* 29/09/2000 Create */ /* */ /* Author Davide Carpegna */ /* */ /* (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved*/ /****************************************************************************/ #ifndef _WINDOWS #include "config/rv.cfg" #endif #if (_GSM==1) #include "rv/rv_general.h" #include "rvf/rvf_api.h" #include "r2d/lcd_messages.h" T_RV_RET LCD_Reset(void) { #if (TEST==0) return lcd_reset(); #else return RV_OK; #endif } T_RV_RET LCD_Clear(void) { #if (TEST==0) return lcd_clear(); #else return RV_OK; #endif } T_RV_RET LCD_Init(void) { #if (TEST==0) return lcd_init(); #else return RV_OK; #endif } T_RV_RET LCD_WriteString(UINT8 row, UINT8 column, char *string, T_VIDEO_MODE mode) { #if (TEST==0) return lcd_write_string(row, column, string, mode); #else return RV_OK; #endif } T_RV_RET LCD_WriteCenter( char *string) { #if (TEST==0) return lcd_write_center(string); #else return RV_OK; #endif } T_RV_RET LCD_ClearString(UINT8 row) { #if (TEST==0) return lcd_clear_string(row); #else return RV_OK; #endif } T_RV_RET LCD_ClearWord(UINT8 row, UINT8 column, UINT16 length) { #if (TEST==0) return lcd_clear_word(row, column, length); #else return RV_OK; #endif } T_RV_RET LCD_PutPixel(UINT8 x, UINT8 y) { #if (TEST==0) return lcd_put_pixel(x, y); #else return RV_OK; #endif } T_RV_RET LCD_ClearPixel(UINT8 x, UINT8 y) { #if (TEST==0) return lcd_clear_pixel(x, y); #else return RV_OK; #endif } T_RV_RET LCD_DrawLine(UINT8 x1, UINT8 y1, UINT8 x2, UINT8 y2) { #if (TEST==0) return lcd_draw_line(x1, y1, x2, y2); #else return RV_OK; #endif } T_RV_RET LCD_ClearLine(UINT8 x1, UINT8 y1, UINT8 x2, UINT8 y2) { #if (TEST==0) return lcd_clear_line(x1, y1, x2, y2); #else return RV_OK; #endif } T_RV_RET LCD_DrawRectangle(UINT8 x1, UINT8 y1, UINT8 x2, UINT8 y2) { #if (TEST==0) return lcd_draw_rectangle(x1, y1, x2, y2); #else return RV_OK; #endif } T_RV_RET LCD_ClearRectangle(UINT8 x1, UINT8 y1, UINT8 x2, UINT8 y2) { #if (TEST==0) return lcd_clear_rectangle(x1, y1, x2, y2); #else return RV_OK; #endif } T_RV_RET LCD_DrawIcon(UINT8 x,UINT8 y,UINT8 icon_id) { #if (TEST==0) return lcd_draw_icon(x,y,icon_id); #else return RV_OK; #endif } T_RV_RET LCD_RefreshBloc(char *table,UINT8 x_dim,UINT8 y_dim,UINT8 x_pos,UINT8 y_pos) { #if (TEST==0) return lcd_refresh_bloc(table,x_dim,y_dim,x_pos,y_pos); #else return RV_OK; #endif } T_RV_RET LCD_PixBlt(int x_pos,int y_pos,int x_dim,int y_dim,char *table) { #if (TEST==0) return lcd_pix_blt(x_pos,y_pos,x_dim,y_dim,table); #else return RV_OK; #endif } T_RV_RET LCD_Enable(UINT8 x) { #if (TEST==0) return lcd_enable(x); #else return RV_OK; #endif } T_RV_RET LCD_SetPower(void) { #if (TEST==0) return lcd_set_power(); #else return RV_OK; #endif } T_RV_RET LCD_Cursor(UINT8 y,UINT8 x) { #if (TEST==0) return lcd_cursor(y,x); #else return RV_OK; #endif } #endif