FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_app/fchg/fchg_convert_mA.c @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | 09ea37852fd6 |
children |
line wrap: on
line source
/* * This module implements the fchg_convert_ichg_to_mA() function, * converting charging current (Ichg) measurements from ADC units * to human-friendly mA numbers. In the phone hardware this current * measurement is made with the aid of a current measurement resistor * placed in the charging current path (the Iota chip's MADC actually * measures the voltage across this resistor, between VCCS and VBATS * terminals), and it just so happens that different phone designers * have chosen different values for this current measurement resistor: * Pirelli DP-L10 uses 0.20R, following TI's canon, whereas Mot C1xx * phones use 0.15R. Because of these different resistor values, * the formula for converting ADC units to mA becomes target-dependent. */ #include "fchg/fchg_api.h" #include "fc-target.h" UINT16 fchg_convert_ichg_to_mA(UINT16 ichg) { #ifdef CONFIG_TARGET_COMPAL /* formula for 0.15R */ return (ichg * 875 / 768); #else /* formula for 0.20R */ return (ichg * 875 / 1024); #endif }