view cdg-hybrid/sap/rr.pdf @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

;********************************************************************************
;*** File           : rr.pdf
;*** Creation       : Wed Mar 11 09:58:44 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : rr
;*** Document No.   : 6147.107.97.108
;*** Document Date  : 2003-02-04
;*** Document Status: BEING_PROCESSED
;*** Document Author: LG
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Tue Jun 3 11:14:30 2008"
PRAGMA 	LAST_MODIFIED 	"2003-02-04"
PRAGMA 	ID_AND_VERSION 	"6147.107.97.108"



CONST 	MAX_SDU_LEN 	1 	; 
CONST 	MAX_PLMN 	12 	; 
CONST 	MAX_DIGITS 	16 	; 
CONST 	SIZE_MCC 	3 	; 
CONST 	SIZE_MNC 	3 	; 
EXTERN CONST 	@p_gsmcom - RR_ORIGINATING_ENTITY@ 	RR_ORIGINATING_ENTITY 	; 
CONST 	SIZE_EPLMN 	18 	; 
CONST 	BA_BITMAP_SIZE 	16 	; 
CONST 	KC_STRING_SIZE 	16 	; 



VALTAB 	VAL_abcs
VAL 	0 	ABCS_NORM 	"normal abort, MM->RR"
VAL 	1 	ABCS_SIM_REM 	"SIM remove, MM->RR"

VALTAB 	VAL_accc
VAL 	0x0 - 0xFFFF 	"access control classes value"

VALTAB 	VAL_v_kc
VAL 	0 	V_KC_NOT_PRES 	"not present"
VAL 	1 	V_KC_PRES 	"present"

VALTAB 	VAL_v_bcch
VAL 	0 	V_BCCH_NOT_PRES 	"not present"
VAL 	1 	V_BCCH_PRES 	"present"

VALTAB 	VAL_bcch
VAL 	0 	BCCH_CH_NOT_INCL 	"channel is not included"
VAL 	1 	BCCH_CH_INCL 	"channel is included"

VALTAB 	VAL_ch_mode
VAL 	0 	CHM_SIG_ONLY 	"signalling only"
VAL 	1 	CHM_SPEECH 	"speech full rate or half rate version 1"
VAL 	33 	CHM_SPEECH_V2 	"speech full rate or half rate version 2"
VAL 	65 	CHM_SPEECH_V3 	"speech full rate or half rate version 3"
VAL 	3 	CHM_DATA_9_6 	"data 9.6 kBit/s"
VAL 	11 	CHM_DATA_4_8 	"data 4.8 kBit/s"
VAL 	19 	CHM_DATA_2_4 	"data 2.4 kBit/s"
VAL 	15 	CHM_DATA_14_4 	"data 2.4 kBit/s"

VALTAB 	VAL_ch_type
VAL 	0 	CH_SDCCH 	"SDCCH channel"
VAL 	1 	CH_TCH_F 	"TCH Fullrate"
VAL 	2 	CH_TCH_H 	"TCH Halfrate"

VALTAB 	VAL_cksn
VAL 	0 - 6 	"valid values"
VAL 	7 	CKSN_RES 	"reserved"
VAL 	255 	CKSN_NOT_PRES 	"not present"

VALTAB 	VAL_ciph
VAL 	0 	CIPH_OFF 	"ciphering off"
VAL 	1 	CIPH_ON 	"ciphering on"
VAL 	255 	CIPH_NOT_PRES 	"not present"

VALTAB 	VAL_estcs
VAL 	0x0400 	ESTCS_SERV_REQ_BY_MM 	"service requested by MM (Location updating or detach)"
VAL 	0x04A0 	ESTCS_EMRG_CAL 	"emergency call"
VAL 	0x04C0 	ESTCS_CAL_REEST 	"call reestablishment"
VAL 	0x04E0 	ESTCS_MOB_ORIG_SPCH_CAL_BY_CC 	"mobile originated speech call by CC"
VAL 	0x04E1 	ESTCS_MOB_ORIG_DATA_CAL_BY_CC 	"mobile originated data call by CC"
VAL 	0x04E2 	ESTCS_MOB_ORIG_DATA_CAL_BY_CC_HR_SUFF 	"mobile originated data call by CC, halfrate sufficient"
VAL 	0x04F0 	ESTCS_MOB_ORIG_CAL_BY_SS_SMS 	"mobile originated call by SS or SMS"

VALTAB 	VAL_thplmn
VAL 	1 - 80 	"(6*value) minutes"
VAL 	81 - 255 	"30 minutes"
VAL 	0 	THPLMN_NO_HPLMN_SRCH 	"no HPLMN search"

VALTAB 	VAL_att
VAL 	0 	ATT_NOT_ALLOW 	"attach / detach not allowed"
VAL 	1 	ATT_ALLOW 	"attach / detach allowed"

VALTAB 	VAL_band
VAL 	255 	BND_DMY_VAL 	"dummy value needed by TAP"

VALTAB 	VAL_valid
VAL 	0 	MM_INFO_NOT_PRES 	"information is not present"
VAL 	1 	MM_INFO_PRES 	"information is present"

VALTAB 	VAL_re
VAL 	0 	RE_ALLOW 	"re-establishment is allowed"
VAL 	1 	RE_NOT_ALLOW 	"re-establishment is not allowed"

VALTAB 	VAL_t3212
VAL 	1 - 255 	"(6 * value) minutes"
VAL 	0 	T3212_NO_PRD_UPDAT 	"no periodic updating"

VALTAB 	VAL_la
VAL 	0 	LA_NOT_IN_FRBD_LST_INCL 	"not in forbidden list included"
VAL 	1 	LA_IN_FRBD_LST_INCL 	"in forbidden list included"

VALTAB 	VAL_v_mid
VAL 	0 	V_MID_NOT_PRES 	"not present"
VAL 	1 	V_MID_PRES 	"present"

VALTAB 	VAL_id_type
VAL 	0 	TYPE_NO_ID 	"no identity"
VAL 	1 	TYPE_IMSI 	"IMSI"
VAL 	4 	TYPE_TMSI 	"TMSI"

VALTAB 	VAL_m
VAL 	0 	M_AUTO 	"automatic mode"
VAL 	1 	M_MAN 	"manual mode"

VALTAB 	VAL_service
VAL 	0 	NO_SERVICE 	"no service available"
VAL 	1 	LIMITED_SERVICE 	"Limited service available"
VAL 	2 	FULL_SERVICE 	"Full service available"

VALTAB 	VAL_v_op
VAL 	0 	V_OP_NOT_PRES 	"not present"
VAL 	1 	V_OP_PRES 	"present"

VALTAB 	VAL_func
VAL 	0 	FUNC_LIM_SERV_ST_SRCH 	"limited service state search"
VAL 	1 	FUNC_PLMN_SRCH 	"PLMN search"
VAL 	2 	FUNC_NET_SRCH_BY_MMI 	"Net search by MMI"
VAL 	3 	FUNC_ST_PWR_SCAN 	"Initiate power scan"

VALTAB 	VAL_ts
VAL 	0 	TS_NO_AVAIL 	"no test SIM card available"
VAL 	1 	TS_AVAIL 	"test SIM card available"

VALTAB 	VAL_sim_ins
VAL 	0 	SIM_NO_INSRT 	"no SIM inserted"
VAL 	1 	SIM_INSRT 	"SIM inserted"

VALTAB 	VAL_plmn_avail
VAL 	0 - MAX_PLMN 	"number of PLMN identifications"

VALTAB 	VAL_v_plmn
VAL 	0 	V_PLMN_NOT_PRES 	"not present"
VAL 	1 	V_PLMN_PRES 	"present"

VALTAB 	VAL_cause
VAL 	0x0300 	RRCS_NORM 	"Normal event"
VAL 	0x0301 	RRCS_ABNORM_UNSPEC 	"Abnormal release, unspecified"
VAL 	0x0302 	RRCS_ABNORM_CH_UNACC 	"Abnormal release, channel unacceptable"
VAL 	0x0303 	RRCS_ABNORM_TIM_EXP 	"Abnormal release, timer expired"
VAL 	0x0304 	RRCS_ABNORM_NO_ACTIVE 	"Abnormal release, no activity on the radio path"
VAL 	0x0305 	RRCS_PREEM 	"Preemptive release"
VAL 	0x0308 	RRCS_TIME_ADVANCE 	"Handover impossible, timing advance out of range"
VAL 	0x0309 	RRCS_CHANNEL_MODE 	"Channel mode unacceptable"
VAL 	0x030A 	RRCS_FREQ_NOT_IMPL 	"Frequency not implemented"
VAL 	0x0341 	RRCS_CAL_ALRED_CLR 	"Call already cleared"
VAL 	0x035F 	RRCS_INCORRECT_MSG 	"Semantically incorrect message"
VAL 	0x0360 	RRCS_INVALID_MANDATORY 	"Invalid mandatory information"
VAL 	0x0361 	RRCS_MSG_TYPE_NOT_IMPLEM 	"Message type non-existent or not implemented"
VAL 	0x0362 	RRCS_MES_INCOMPAT 	"Message type not compatible with protocol state"
VAL 	0x0364 	RRCS_INVALID_IE 	"Conditional IE error"
VAL 	0x0365 	RRCS_NO_CELL_ALLOCATION 	"No cell allocation available"
VAL 	0x036F 	RRCS_PROT_ERR_UNSPEC 	"Protocol error, unspecified"
VAL 	0xC310 	RRCS_ABORT_CEL_SEL_FAIL 	"Cell selection failed (RR_ABORT_IND)"
VAL 	0xC311 	RRCS_ABORT_RAD_LNK_FAIL 	"Radio link failure (RR_ABORT_IND)"
VAL 	0xC312 	RRCS_DATA_LINK_FAIL 	"Data link failure (RR_ABORT_IND / RR_RELEASE_IND)"
VAL 	0x8320 	RRCS_ACCESS_BARRED 	"Access barred because of access class control"
VAL 	0x8321 	RRCS_RND_ACC_DELAY 	"Random access is delayed (immediate assignment reject)"
VAL 	0xC322 	RRCS_RND_ACC_FAIL 	"Random access failed"
VAL 	0xC323 	RRCS_DL_EST_FAIL 	"DL establishment failure"
VAL 	0xC324 	RRCS_MO_MT_COLL 	"Collision MO with MT; MT has higher priority than MO"
VAL 	0xC325 	RRCS_MM_ABORTED 	"MM aborted the connection"
VAL 	0xC326 	RRCS_QUEUE_FULL 	"Internal RR primitive queue full"
VAL 	0xC327 	RRCS_T3122_RUNNING 	"T3122 is still running, emergency calls only until expiry"
VAL 	0xC328 	RRCS_INVALID_HOP_FREQ 	"Frequency hopping in more than one frequency band"
VAL 	0xC3FF 	RRCS_INT_NOT_PRESENT 	"Internal release, release cause not present"
VAL 	0xc400 	RRCS_ABORT_PTM 	"RR is in GPRS_PTM_BCCH, GPRS_PTM_PBCCH, GPRS_PAM_BCCH, GPRS_PAM_PBCCH states cannot handle RR_ACTIVATE__REQ"

VALTAB 	VAL_sapi
VAL 	0 	SAPI_0 	"SAPI 0"
VAL 	3 	SAPI_3 	"SAPI 3"

VALTAB 	VAL_synccs
VAL 	0x8300 	SYNCCS_ACC_CLS_CHA 	"access class changed"
VAL 	0x8301 	SYNCCS_T3122_TIM_OUT 	"T3122 time-out"
VAL 	0x8411 	SYNCCS_TMSI_CKSN_KC_INVAL 	"TMSI, CKSN, Kc invalid"
VAL 	0x8412 	SYNCCS_TMSI_INVAL 	"TMSI invalid"
VAL 	0x8413 	SYNCCS_TMSI_CKSN_KC_INVAL_NO_PAG 	"TMSI, CKSN, Kc invalid, no paging"
VAL 	0x8414 	SYNCCS_LAI_NOT_ALLOW 	"LAI not allowed"
VAL 	0x8415 	SYNCCS_LAI_ALLOW 	"LAI allowed"
VAL 	0x8416 	SYNCCS_LUP_RETRY 	"Lup retry permission"
VAL 	0x8417 	SYNCCS_LIMITED_SERVICE 	"RR is informed about limited service"
VAL 	0x8418 	SYNCCS_BACK_FROM_DEDICATED 	"RR has selected old cell after conn"
VAL 	0x8419 	SYNCCS_SYS_INFO_CHANGE 	"RR has detected a sysinfo change"
VAL 	0x841A 	SYNCCS_ACCC 	"access class changed"
VAL 	0x841B 	SYNCCS_IDLE_SELECTION 	"RR has selected the old cell"
VAL 	0x841C 	SYNCCS_LAI_NOT_ALLOW_FOR_ROAMING 	"LAI not allowed for roaming"
VAL 	0x841D 	SYNCCS_EPLMN_LIST 	"Changed EPLMN list available"

VALTAB 	VAL_cell_test
VAL 	0x00 	CELL_TEST_DISABLE 	"cell test operation disable"
VAL 	0x01 	CELL_TEST_ENABLE 	"cell test operation enable"

VALTAB 	VAL_gprs_indication
VAL 	0x00 	GPRS_NO 	"no GPRS mode"
VAL 	0x01 	GPRS_YES 	"GPRS mode"

VALTAB 	VAL_gprs_resumption
VAL 	0x00 	GPRS_RESUMPTION_NOT_ACK 	"GPRS resumption not successfull"
VAL 	0x01 	GPRS_RESUMPTION_ACK 	"GPRS resumption successfull"

VALTAB 	VAL_check_hplmn
VAL 	0 	CHECK_PLMN_NOT_PRES 	"not present"
VAL 	1 	CHECK_PLMN_PRES 	"present"




VAR 	abcs 	"abort cause" 	B

VAL 	@p_rr - VAL_abcs@ 	

VAR 	accc 	"access control classes" 	S

VAL 	@p_rr - VAL_accc@ 	

VAR 	v_kc 	"valid flag" 	B

VAL 	@p_rr - VAL_v_kc@ 	

VAR 	kc 	"Kc value" 	B


VAR 	v_bcch 	"valid flag" 	B

VAL 	@p_rr - VAL_v_bcch@ 	

VAR 	bcch 	"BCCH carrier list" 	B

VAL 	@p_rr - VAL_bcch@ 	

VAR 	cid 	"cell identity" 	S


VAR 	ch_type 	"Channel Type" 	B

VAL 	@p_rr - VAL_ch_type@ 	

VAR 	ch_mode 	"Channel Mode" 	B

VAL 	@p_rr - VAL_ch_mode@ 	

VAR 	cksn 	"ciphering key sequence number" 	B

VAL 	@p_rr - VAL_cksn@ 	

VAR 	ciph 	"cipher mode" 	B

VAL 	@p_rr - VAL_ciph@ 	

VAR 	d1 	"dummy, not used" 	B


VAR 	d2 	"dummy, not used" 	B


VAR 	param 	"dummy parameter" 	B


VAR 	estcs 	"establishment cause" 	S

VAL 	@p_rr - VAL_estcs@ 	

VAR 	thplmn 	"HPLN time" 	B

VAL 	@p_rr - VAL_thplmn@ 	

VAR 	lac 	"location area code" 	S


VAR 	valid 	"valid information" 	B

VAL 	@p_rr - VAL_valid@ 	

VAR 	la 	"Location area indication" 	B

VAL 	@p_rr - VAL_la@ 	

VAR 	att 	"attach / detach flag" 	B

VAL 	@p_rr - VAL_att@ 	

VAR 	re 	"re-establishment flag" 	B

VAL 	@p_rr - VAL_re@ 	

VAR 	band 	"band (dummy)" 	B

VAL 	@p_rr - VAL_band@ 	

VAR 	ncc 	"national colour code" 	B


VAR 	bcc 	"base station colour code" 	B


VAR 	t3212 	"periodic updating timer period" 	B

VAL 	@p_rr - VAL_t3212@ 	

VAR 	v_mid 	"valid flag" 	B

VAL 	@p_rr - VAL_v_mid@ 	

VAR 	id_type 	"type of identity" 	B

VAL 	@p_rr - VAL_id_type@ 	

VAR 	id 	"IMSI digits" 	B


VAR 	tmsi_dig 	"TMSI digits" 	L


VAR 	v_op 	"valid flag" 	B

VAL 	@p_rr - VAL_v_op@ 	

VAR 	ts 	"test SIM card" 	B

VAL 	@p_rr - VAL_ts@ 	

VAR 	m 	"registration mode" 	B

VAL 	@p_rr - VAL_m@ 	

VAR 	sim_ins 	"SIM card" 	B

VAL 	@p_rr - VAL_sim_ins@ 	

VAR 	func 	"Operation Mode" 	B

VAL 	@p_rr - VAL_func@ 	

VAR 	service 	"RR Service" 	B

VAL 	@p_rr - VAL_service@ 	

VAR 	plmn_avail 	"PLMN available" 	B

VAL 	@p_rr - VAL_plmn_avail@ 	

VAR 	v_plmn 	"valid flag" 	B

VAL 	@p_rr - VAL_v_plmn@ 	

VAR 	cause 	"RR cause" 	S

VAL 	@p_rr - VAL_cause@ 	

VAR 	sapi 	"service access point identifier" 	B

VAL 	@p_rr - VAL_sapi@ 	

VAR 	l_buf 	"length in bits" 	S


VAR 	o_buf 	"offset in bits" 	S


VAR 	buf 	"bit buffer" 	B


VAR 	synccs 	"synchronisation cause" 	S

VAL 	@p_rr - VAL_synccs@ 	

VAR 	rxlevel 	"Fieldstrength" 	B


VAR 	power 	"Power class" 	B


VAR 	cell_test 	"cell test operation" 	B

VAL 	@p_rr - VAL_cell_test@ 	

VAR 	gprs_indication 	"GPRS indicator" 	B

VAL 	@p_rr - VAL_gprs_indication@ 	

VAR 	gprs_resumption 	"GPRS resumption information" 	B

VAL 	@p_rr - VAL_gprs_resumption@ 	

VAR 	lac_list 	"LACs of found PLMNs" 	S


VAR 	v_eq_plmn 	"Validity of equivalent plmn list" 	B


VAR 	mcc 	"Mobile country code." 	B


VAR 	mnc 	"Mobile network code." 	B


VAR 	eq_plmn 	"Basic Element" 	B


VAR 	check_hplmn 	"Flag for HPLMN " 	B

VAL 	@p_rr - VAL_check_hplmn@ 	




COMP 	kcv 	 "kc - Value"
{
 	v_kc 	 ; valid flag
 	kc 	[KC_STRING_SIZE] 	 ; Kc value
}



COMP 	bcch_info 	 "BCCH information"
{
 	v_bcch 	 ; valid flag
 	bcch 	[BA_BITMAP_SIZE] 	 ; BCCH carrier list
}



COMP 	chm 	 "Channel using mode"
{
 	ch_type 	 ; Channel Type
 	ch_mode 	 ; Channel Mode
}



COMP 	mm_info 	 "MM information"
{
 	valid 	 ; valid information
 	la 	 ; Location area indication
 	att 	 ; attach / detach flag
 	re 	 ; re-establishment flag
 	band 	 ; band (dummy)
 	ncc 	 ; national colour code
 	bcc 	 ; base station colour code
 	t3212 	 ; periodic updating timer period
}



COMP 	imsi_struct 	 "mobile identity"
{
 	v_mid 	 ; valid flag
 	id_type 	 ; type of identity
 	id 	[MAX_DIGITS] 	 ; IMSI digits
 	tmsi_dig 	 ; TMSI digits
}
TYPEDEF COMP imsi_struct 	tmsi_struct 	 "mobile identity"



COMP 	op 	 "operation mode"
{
 	v_op 	 ; valid flag
 	ts 	 ; test SIM card
 	m 	 ; registration mode
 	sim_ins 	 ; SIM card
 	func 	 ; Operation Mode
 	service 	 ; RR Service
}



COMP 	plmn 	 "PLMN identification"
{
 	v_plmn 	 ; valid flag
 	mcc 	[SIZE_MCC] 	 ; mobile country code
 	mnc 	[SIZE_MNC] 	 ; mobile network code
}



COMP 	sdu 	 "Service Data Unit"
{
 	l_buf 	 ; length in bits
 	o_buf 	 ; offset in bits
 	buf 	[MAX_SDU_LEN] 	 ; bit buffer
}



COMP 	eq_plmn_list 	 "Equivalent plmn List"
{
 	eq_plmn 	[SIZE_EPLMN] 	 ; Equivalent PLMN
 	v_eq_plmn 	 ; Validity of equivalent plmn list
}






; RR_ABORT_REQ 	0x80000006
; RR_ABORT_IND 	0x80004006
; RR_ACTIVATE_REQ 	0x80010006
; RR_ACTIVATE_CNF 	0x80014006
; RR_ACTIVATE_IND 	0x80024006
; RR_DATA_REQ 	0x80020006
; RR_DATA_IND 	0x80034006
; RR_DEACTIVATE_REQ 	0x80030006
; RR_ESTABLISH_REQ 	0x80040006
; RR_ESTABLISH_CNF 	0x80044006
; RR_ESTABLISH_IND 	0x80054006
; RR_RELEASE_IND 	0x80074006
; RR_SYNC_REQ 	0x80050006
; RR_SYNC_IND 	0x80084006
; RR_RRLP_START_IND 	0x80094006
; RR_RRLP_STOP_IND 	0x800A4006
; RR_SYNC_HPLMN_REQ 	0x80060006



PRIM 	RR_ABORT_REQ 	0x80000006
{
 	abcs 	 ; abort cause
}






PRIM 	RR_ABORT_IND 	0x80004006
{
 	op 	 ; operation mode
 	cause 	 ; abort cause
 	plmn_avail 	 ; PLMN available
 	plmn 	[MAX_PLMN] 	 ; PLMN identification
 	lac_list 	[MAX_PLMN] 	 ; List of LACs
 	rxlevel 	[MAX_PLMN] 	 ; RX level
 	power 	 ; power class
}






PRIM 	RR_ACTIVATE_REQ 	0x80010006
{
 	plmn 	 ; PLMN identification
 	op 	 ; operation mode
 	cksn 	 ; ciphering key sequence number
 	kcv 	 ; kc - Value
 	accc 	 ; access control class
 	imsi_struct 	 ; mobile identity
 	tmsi_struct 	 ; mobile identity
 	thplmn 	 ; HPLMN time
 	bcch_info 	 ; BCCH information
 	cell_test 	 ; Cell test operation
 	gprs_indication 	 ; GPRS indicator
 	eq_plmn_list 	 ; Equivalent PLMN list
 	check_hplmn 	 ; Flag for HPLMN 
}






PRIM 	RR_ACTIVATE_CNF 	0x80014006
{
 	op 	 ; Operation mode
 	mm_info 	 ; MM information
 	cid 	 ; cell identity
 	plmn 	 ; PLMN identification
 	lac 	 ; location area code
 	power 	 ; power class
 	gprs_indication 	 ; GPRS indicator
}






PRIM 	RR_ACTIVATE_IND 	0x80024006
{
 	op 	 ; operation mode
 	mm_info 	 ; MM information
 	cid 	 ; cell identity
 	plmn 	 ; PLMN identification
 	lac 	 ; location area code
 	power 	 ; power class
 	gprs_indication 	 ; GPRS indicator
}






PRIM 	RR_DATA_REQ 	0x80020006
{
 	d1 	 ; dummy, not used
 	d2 	 ; dummy, not used
 	sdu 	 ; layer 3 message
}






PRIM 	RR_DATA_IND 	0x80034006
{
 	d1 	 ; dummy, not used
 	d2 	 ; dummy, not used
 	sdu 	 ; layer 3 message
}






PRIM 	RR_DEACTIVATE_REQ 	0x80030006
{
 	param 	 ; dummy parameter
}






PRIM 	RR_ESTABLISH_REQ 	0x80040006
{
 	estcs 	 ; establishment cause
 	sdu 	 ; layer 3 message
}






PRIM 	RR_ESTABLISH_CNF 	0x80044006
{
 	param 	 ; dummy parameter
}






PRIM 	RR_ESTABLISH_IND 	0x80054006
{
 	param 	 ; dummy parameter
}






PRIM 	RR_RELEASE_IND 	0x80074006
{
 	cause 	 ; RR cause
 	sapi 	 ; service access point identifier
 	gprs_resumption 	 ; GPRS resumption
}






PRIM 	RR_SYNC_REQ 	0x80050006
{
 	op 	 ; operation mode
 	cksn 	 ; ciphering key sequence number
 	kcv 	 ; kc - Value
 	tmsi_struct 	 ; mobile identity
 	plmn 	 ; PLMN identification
 	lac 	 ; location area code
 	synccs 	 ; sync cause
 	accc 	 ; access control classes
 	thplmn 	 ; HPLMN search period
 	eq_plmn_list 	 ; Equivalent PLMN list
}






PRIM 	RR_SYNC_IND 	0x80084006
{
 	ciph 	 ; cipher mode
 	mm_info 	 ; MM information
 	bcch_info 	 ; BCCH information
 	synccs 	 ; sync cause
 	chm 	 ; channel using mode
}






PRIM 	RR_RRLP_START_IND 	0x80094006 	%REL99%
{
 	param 	 ; dummy parameter
}






PRIM 	RR_RRLP_STOP_IND 	0x800A4006 	%REL99%
{
 	param 	 ; dummy parameter
}






PRIM 	RR_SYNC_HPLMN_REQ 	0x80060006
{
 	plmn 	 ; Primitive Item
}