FreeCalypso > hg > fc-tourmaline

view cdg-hybrid/sap/ipa.pdf @ 303:f76436d19a7a default tip

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

;********************************************************************************
;*** File           : ipa.pdf
;*** Creation       : Wed Mar 11 09:58:13 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : ipa
;*** Document No.   : 8444.104.02.007
;*** Document Date  : 2003-08-30
;*** Document Status: BEING_PROCESSED
;*** Document Author: Jacek
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:43:54 2007"
PRAGMA 	LAST_MODIFIED 	"2003-08-30"
PRAGMA 	ID_AND_VERSION 	"8444.104.02.007"



CONST 	IPA_ENTITY_NAME_LEN 	6 	; maximum length of entity name including NULL



VALTAB 	VAL_dti_conn
VAL 	0 	IPA_CONNECT_DTI 	"Connect DTI2 to IP"
VAL 	1 	IPA_DISCONNECT_DTI 	"Disconnect DTI2 from IP"

VALTAB 	VAL_link_id
VAL 	0 	IPA_LINK_ID_DEFAULT 	"Default link id"

VALTAB 	VAL_dti_direction
VAL 	0 	IPA_DTI_TO_HIGHER_LAYER 	"DTI2 used normally"
VAL 	1 	IPA_DTI_TO_LOWER_LAYER 	"DTI2 is inverted"

VALTAB 	VAL_cmd
VAL 	0 	IPA_CONFIG_UP 	"enable the interface"
VAL 	1 	IPA_CONFIG_DOWN 	"disable the interface"

VALTAB 	VAL_ack_flag
VAL 	0 	IPA_CONFIG_ACK 	"Acknowledged"
VAL 	1 	IPA_CONFIG_NAK 	"not acknowledged"

VALTAB 	VAL_all_down
VAL 	0 	IPA_ALLDOWN_FALSE 	">= 1 Interface still up"
VAL 	1 	IPA_ALLDOWN_TRUE 	"all interfaces down"




VAR 	dti_conn 	"DTI2 connect" 	B

VAL 	@p_ipa - VAL_dti_conn@ 	

VAR 	link_id 	"Link identifier" 	L

VAL 	@p_ipa - VAL_link_id@ 	

VAR 	dti_direction 	"DTI2 direction" 	B

VAL 	@p_ipa - VAL_dti_direction@ 	

VAR 	ip 	"IP address" 	L


VAR 	peer_ip 	"peer IP address" 	L


VAR 	mtu 	"maximum transfer unit" 	S


VAR 	cmd 	"Command" 	B

VAL 	@p_ipa - VAL_cmd@ 	

VAR 	ack_flag 	"acknowledge flag" 	B

VAL 	@p_ipa - VAL_ack_flag@ 	

VAR 	all_down 	"all interfaces down flag" 	B

VAL 	@p_ipa - VAL_all_down@ 	

VAR 	entity_name 	"name of an neighbour entity" 	B








; IPA_DTI_REQ 	0x8000003C
; IPA_DTI_CNF 	0x8000403C
; IPA_DTI_IND 	0x8001403C
; IPA_CONFIG_REQ 	0x8001003C
; IPA_CONFIG_CNF 	0x8002403C



PRIM 	IPA_DTI_REQ 	0x8000003C
{
 	dti_conn 	 ; DTI connect
 	entity_name 	[IPA_ENTITY_NAME_LEN] 	 ; entity name
 	link_id 	 ; link identifier
 	dti_direction 	 ; DTI direction
}






PRIM 	IPA_DTI_CNF 	0x8000403C
{
 	dti_conn 	 ; DTI connect
 	link_id 	 ; link identifier
}






PRIM 	IPA_DTI_IND 	0x8001403C
{
 	link_id 	 ; link identifier
}






PRIM 	IPA_CONFIG_REQ 	0x8001003C
{
 	ip 	 ; IP address
 	peer_ip 	 ; peer IP address
 	mtu 	 ; Maximum transfer unit
 	cmd 	 ; Command
}






PRIM 	IPA_CONFIG_CNF 	0x8002403C
{
 	ack_flag 	 ; Acknowledge flag
 	all_down 	 ; all interfaces down flag
}