FreeCalypso > hg > fc-tourmaline

view cdg-hybrid/sap/8010_142_smreg_sap.pdf @ 303:f76436d19a7a default tip

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

;********************************************************************************
;*** File           : 8010_142_smreg_sap.pdf
;*** Creation       : Wed Mar 11 09:57:52 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : 8010_142_smreg_sap
;*** Document No.   : 8010.142.02.011
;*** Document Date  : 2003-08-22
;*** Document Status: APPROVED
;*** Document Author: MVJ
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:28:36 2007"
PRAGMA 	LAST_MODIFIED 	"2003-08-22"
PRAGMA 	ID_AND_VERSION 	"8010.142.02.011"
PRAGMA 	PREFIX 	SMREG 	; Prefix for this document
PRAGMA 	ALLWAYS_ENUM_IN_VAL_FILE 	YES 	; Enumeration values in value file
PRAGMA 	ENABLE_GROUP 	NO 	; Enable h-file grouping
PRAGMA 	COMPATIBILITY_DEFINES 	NO 	; Compatible to the old #defines






VALTAB 	VAL_pdp_type
VAL 	1 	PDP_PPP 	"PDP type PPP"
VAL 	15 	PDP_EMPTY 	"Dynamic address assignment in effect"
VAL 	33 	PDP_IPV4 	"IP version 4"
VAL 	87 	PDP_IPV6 	"IP version 6"




VAR 	apn_buf 	"Access point name value" 	B


VAR 	pdp_type 	"PDP type" 	B

VAL 	@p_8010_142_smreg_sap - VAL_pdp_type@ 	




COMP 	apn 	 "access point name"
{
 	apn_buf 	[3..102] 	 ; Access point name value
}






; SMREG_CONFIGURE_REQ 	0x2600
; SMREG_PDP_ACTIVATE_REQ 	0x2601
; SMREG_PDP_ACTIVATE_CNF 	0x6600
; SMREG_PDP_ACTIVATE_IND 	0x6602
; SMREG_PDP_ACTIVATE_REJ 	0x6601
; SMREG_PDP_ACTIVATE_REJ_RES 	0x2604
; SMREG_PDP_ACTIVATE_SEC_REQ 	0x2606
; SMREG_PDP_ACTIVATE_SEC_CNF 	0x6608
; SMREG_PDP_ACTIVATE_SEC_REJ 	0x6609
; SMREG_PDP_DEACTIVATE_REQ 	0x2602
; SMREG_PDP_DEACTIVATE_CNF 	0x6603
; SMREG_PDP_DEACTIVATE_IND 	0x6604
; SMREG_PDP_MODIFY_REQ 	0x2605
; SMREG_PDP_MODIFY_CNF 	0x6606
; SMREG_PDP_MODIFY_IND 	0x6605
; SMREG_PDP_MODIFY_REJ 	0x6607



PRIM 	SMREG_CONFIGURE_REQ 	0x2600
{
 	EXTERN @p_8010_152_ps_include - rat@ 	rat 	 ; RAT
 	EXTERN @p_8010_152_ps_include - sgsn_rel@ 	sgsn_rel 	 ; network release
}






PRIM 	SMREG_PDP_ACTIVATE_REQ 	0x2601
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; Network layer service access point identifier
 	EXTERN @p_8010_137_nas_include - ti@ 	ti 	 ; Transaction identifier
 	EXTERN @p_8010_137_nas_include - comp_params@ 	comp_params 	 ; Compression parameters
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; Requested quality of service
 	EXTERN @p_8010_152_ps_include - min_qos@ 	min_qos 	 ; Minimum requested QoS
 	pdp_type 	 ; PDP type
 	EXTERN @p_8010_137_nas_include - ip_address@ 	ip_address 	 ; PDP address
 	apn 	 ; Access point name
 	< () 	EXTERN @p_8010_137_nas_include - tft@ 	tft 	> 	 ; Traffic Flow Template; R99
 	EXTERN @p_8010_152_ps_include - sdu@ 	sdu 	 ; PDP config options
}






PRIM 	SMREG_PDP_ACTIVATE_CNF 	0x6600
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; Network layer service access point identifier
 	pdp_type 	 ; PDP type
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; Quality of service
 	EXTERN @p_8010_137_nas_include - comp_params@ 	comp_params 	 ; Compression parameters
 	EXTERN @p_8010_137_nas_include - ip_address@ 	ip_address 	 ; PDP address
 	EXTERN @p_8010_152_ps_include - sdu@ 	sdu 	 ; PDP config options
}






PRIM 	SMREG_PDP_ACTIVATE_IND 	0x6602
{
 	EXTERN @p_8010_137_nas_include - ti@ 	ti 	 ; transaction identifier
 	pdp_type 	 ; PDP type
 	EXTERN @p_8010_137_nas_include - ip_address@ 	ip_address 	 ; PDP address
 	apn 	 ; access point name
}






PRIM 	SMREG_PDP_ACTIVATE_REJ 	0x6601
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; Network layer service access point identifier
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; Cause of rejection
}






PRIM 	SMREG_PDP_ACTIVATE_REJ_RES 	0x2604
{
 	EXTERN @p_8010_137_nas_include - ti@ 	ti 	 ; transaction identifier
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; cause of rejection
}






PRIM 	SMREG_PDP_ACTIVATE_SEC_REQ 	0x2606
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; Network layer service access point identifier
 	EXTERN @p_8010_137_nas_include - pri_nsapi@ 	pri_nsapi 	 ; Primary NSAPI
 	EXTERN @p_8010_137_nas_include - ti@ 	ti 	 ; Transaction identifier
 	EXTERN @p_8010_137_nas_include - comp_params@ 	comp_params 	 ; Compression parameters
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; Requested quality of service
 	EXTERN @p_8010_152_ps_include - min_qos@ 	min_qos 	 ; Minimum requested QoS
 	< () 	EXTERN @p_8010_137_nas_include - tft@ 	tft 	> 	 ; Traffic flow template
}






PRIM 	SMREG_PDP_ACTIVATE_SEC_CNF 	0x6608
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; quality of service
}






PRIM 	SMREG_PDP_ACTIVATE_SEC_REJ 	0x6609
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; cause of rejection
}






PRIM 	SMREG_PDP_DEACTIVATE_REQ 	0x2602
{
 	EXTERN @p_8010_137_nas_include - nsapi_set@ 	nsapi_set 	 ; Set of network layer service access point identifiers
 	EXTERN @p_8010_152_ps_include - rel_ind@ 	rel_ind 	 ; Local deactivation flag
}






PRIM 	SMREG_PDP_DEACTIVATE_CNF 	0x6603
{
 	EXTERN @p_8010_137_nas_include - nsapi_set@ 	nsapi_set 	 ; Set of network layer service access point identifiers
}






PRIM 	SMREG_PDP_DEACTIVATE_IND 	0x6604
{
 	EXTERN @p_8010_137_nas_include - nsapi_set@ 	nsapi_set 	 ; Set of network layer service access point identifiers
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; Deactivation cause
}






PRIM 	SMREG_PDP_MODIFY_REQ 	0x2605
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; requested quality of service
 	EXTERN @p_8010_152_ps_include - min_qos@ 	min_qos 	 ; minimum quality of service
 	< () 	EXTERN @p_8010_137_nas_include - tft@ 	tft 	> 	 ; traffic flow template
}






PRIM 	SMREG_PDP_MODIFY_CNF 	0x6606
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; quality of service
}






PRIM 	SMREG_PDP_MODIFY_IND 	0x6605
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; Network layer service access point identifier
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; Quality of service; Optional
 	EXTERN @p_8010_137_nas_include - ip_address@ 	ip_address 	 ; PDP address; R99, Optional
}






PRIM 	SMREG_PDP_MODIFY_REJ 	0x6607
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; cause of rejection
}