view cdg-hybrid/cdginc/p_dti.val @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_dti.val                                                      |
| SOURCE  : "sap\dti.pdf"                                                  |
| LastModified : "2000-06-29"                                              |
| IdAndVersion : "8411.110.00.007"                                         |
| SrcFileTime  : "Thu Nov 29 09:40:22 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_DTI_VAL
#define P_DTI_VAL


#define CDG_ENTER__P_DTI_VAL

#define CDG_ENTER__FILENAME _P_DTI_VAL
#define CDG_ENTER__P_DTI_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_DTI_VAL__LAST_MODIFIED _2000_06_29
#define CDG_ENTER__P_DTI_VAL__ID_AND_VERSION _8411_110_00_007

#define CDG_ENTER__P_DTI_VAL__SRC_FILE_TIME _Thu_Nov_29_09_40_22_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_DTI_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_c_id
 */
#define DTI_NSAPI_0                    (0x0)      /* escape mechanism for future extensions */
#define DTI_NSAPI_1                    (0x1)      /* Point-To-Multipoint Multicast information */
#define DTI_NSAPI_2                    (0x2)      /* reserved for future use        */
#define DTI_NSAPI_3                    (0x3)      /* reserved for future use        */
#define DTI_NSAPI_4                    (0x4)      /* reserved for future use        */
#define DTI_NSAPI_5                    (0x5)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_6                    (0x6)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_7                    (0x7)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_8                    (0x8)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_9                    (0x9)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_10                   (0xa)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_11                   (0xb)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_12                   (0xc)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_13                   (0xd)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_14                   (0xe)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_15                   (0xf)      /* dynamically allocated NSAPI value */
#define DTI_C_ID_DEFAULT               (0x5)      /* Default value for c_id         */

/*
 * Value constants for VAL_p_id
 */
#define DTI_PID_IP                     (0x21)     /* simple ip packet               */
#define DTI_PID_CTCP                   (0x2d)     /* Van Jacobson compressed TCP/IP header */
#define DTI_PID_UTCP                   (0x2f)     /* Van Jacobson uncompressed TCP/IP header */
#define DTI_PID_FRAME                  (0x0)      /* PPP frame                      */

/*
 * Value constants for VAL_op_ack
 */
#define OP_ACK                         (0x1)      /* acknowledged operation mode    */
#define OP_UNACK                       (0x0)      /* unacknowledged operation mode  */

/*
 * Value constants for VAL_st_flow
 */
#define DTI_FLOW_ON                    (0x0)      /* flow control is inactive       */
#define DTI_FLOW_OFF                   (0x1)      /* flow control is active         */

/*
 * Value constants for VAL_st_line_sa
 */
#define DTI_SA_ON                      (0x0)      /* SA is inactive                 */
#define DTI_SA_OFF                     (0x1)      /* SA is active                   */

/*
 * Value constants for VAL_st_line_sb
 */
#define DTI_SB_ON                      (0x0)      /* SB is inactive                 */
#define DTI_SB_OFF                     (0x1)      /* SB is active                   */

/*
 * Value constants for VAL_st_escape
 */
#define DTI_ESC_OFF                    (0x0)      /* No escape detected             */
#define DTI_ESC_ON                     (0x1)      /* Escape detected                */

#include "CDG_LEAVE.h"


#endif