FreeCalypso > hg > fc-tourmaline

view src/cs/drivers/drv_app/lcc/lcc_modulate.c @ 265:e57bfdadf49a

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
mmiIcons.c: fix bogus icnType in incoming_call_animate[] The incoming call animation icons are actually drawn in 256-color format, but they were incorrectly declared as BMP_FORMAT_32BIT_COLOUR in the incoming_call_animate[] array. Why were they still getting displayed correctly despite this bogosity? Answer: because the mmi_dialogs_animation_new_CB() function overrides the icon bitmap type to 0x02, which means 256-color format. Needless to say, the icon format should be made correct at the source of the data, and at some later point we may need to remove the override from the animation display function.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 17 May 2021 07:18:36 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/******************************************************************************
 * Power Task (pwr)
 * Design and coding by Svend Kristian Lindholm, skl@ti.com
 *
 * PWR SW Modulation
 *
 * $Id: pwr_modulate.c 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $
 *
 ******************************************************************************/
#include <string.h>
#include "lcc/lcc.h"
#include "lcc/lcc_trace.h"
#include "lcc/lcc_modulate.h"
#include "lcc/lcc_cfg_i.h"
#include "lcc/lcc_cfg.h"
#include "rv/rv_defined_swe.h"
#include "abb/abb.h"

/******************************************************************************
 * Function prototypes
 ******************************************************************************/

void pwr_modulate_init(void);
void pwr_modulate_on(void);
void pwr_modulate_off(void);


#if (USE_Q401_CHG_CIRCUIT == 1)
extern T_PWR_CFG_BLOCK  *pwr_cfg;
#endif

void pwr_modulate_init(void) {
    ttw(ttr(TTrEventLow,"pwr_modulate_init(%d)" NL, 0));
    #if (USE_PWL_AS_MODULATOR == 1)
    BUZZ_LIGHT_REG |= 0x02;
    PWL_LEVEL_REG = 0xFF; // Full envelope function
    PWL_CTRL_REG  = 0x00; // No 32KHz clock
    #else
    // Set GPIO 6 HIGH
    *((volatile uint16 *) 0xfffe4806) |= 0x0020; // Enable GPIO module
    *((volatile uint16 *) 0xfffe4804) &= 0xffbf; // Set GPIO-6 = output
    *((volatile uint16 *) 0xfffe4802) |= 0x0080; // Set GPIO-6 = HIGH
    #endif
    ttw(ttr(TTrEventLow,"pwr_modulate_init(%d)" NL, 0xff));
}

void pwr_modulate_on(void) {
    ttw(ttr(TTrEventLow,"pwr_modulate_on(%d)" NL, 0));
#if (USE_Q401_CHG_CIRCUIT== 1)
    /* Program the DAC with the constant current value taken from /pwr/chg/chg<N>.cfg multiplied by k/255, where current k is in [1..255] */
    ABB_Write_Register_on_page(PAGE0, CHGREG, (pwr_cfg->data.k * pwr_cfg->chg.ichg_max) / 255);
#endif
#if (USE_Q402_CHG_CIRCUIT == 1)
    #if (USE_PWL_AS_MODULATOR == 1)
    BUZZ_LIGHT_REG |= 0x02;
    PWL_LEVEL_REG = 0xFF; // Full envelope function
    PWL_CTRL_REG  = 0x00; // No 32KHz clock
    #else
    // Use GPIO 6
    *((volatile uint16 *) 0xfffe4806) |= 0x0020; // Enable GPIO module
    *((volatile uint16 *) 0xfffe4804) &= 0xffbf; // Set GPIO-6 = output
    *((volatile uint16 *) 0xfffe4802) |= 0x0080; // Set GPIO-6 = HIGH
    #endif
#endif
    ttw(ttr(TTrEventLow,"pwr_modulate_on(%d)" NL, 0xFF));

}

void pwr_modulate_off(void) {
    ttw(ttr(TTrEventLow,"pwr_modulate_off(%d)" NL, 0));
#if (USE_Q401_CHG_CIRCUIT == 1)
    // Don't do anything - FET is fully controlled in pwr_modulate_on()
#endif
#if (USE_Q402_CHG_CIRCUIT == 1)
    #ifdef USE_PWL_AS_MODULATOR
    BUZZ_LIGHT_REG &= 0xfd;
    PWL_LEVEL_REG = 0x00; // No envelope function
    PWL_CTRL_REG  = 0x00; // No 32KHz clock
    #else
    // Use GPIO 6
    *((volatile uint16 *) 0xfffe4806) |= 0x0020; // Enable GPIO module
    *((volatile uint16 *) 0xfffe4804) &= 0xffbf; // Set GPIO-6 = output
    *((volatile uint16 *) 0xfffe4802) &= 0x007f; // Set GPIO-6 = LOW
    #endif
#endif
    ttw(ttr(TTrEventLow,"pwr_modulate_off(%d)" NL, 0xFF));
}