view src/cs/drivers/drv_app/fchg/fchg_struct.h @ 265:e57bfdadf49a

mmiIcons.c: fix bogus icnType in incoming_call_animate[] The incoming call animation icons are actually drawn in 256-color format, but they were incorrectly declared as BMP_FORMAT_32BIT_COLOUR in the incoming_call_animate[] array. Why were they still getting displayed correctly despite this bogosity? Answer: because the mmi_dialogs_animation_new_CB() function overrides the icon bitmap type to 0x02, which means 256-color format. Needless to say, the icon format should be made correct at the source of the data, and at some later point we may need to remove the override from the animation display function.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 17 May 2021 07:18:36 +0000
parents 769cf6273fe4
children
line wrap: on
line source

/*
 * Internal structure definitions for the FCHG SWE reside here.
 * abb_inth.c will also need to include this header in order to
 * get our T_PWR_CTRL_BLOCK definition.
 */

#ifndef __FCHG_STRUCT_H
#define __FCHG_STRUCT_H

#include "rv/rv_general.h"
#include "rvf/rvf_api.h"
#include "fchg/fchg_common.h"

struct charging_config {
	UINT16	start_delay;
	UINT16	start_thresh;
	UINT16	restart_thresh;
	UINT16	ci2cv_thresh;
	UINT16	cv_init_set;
	UINT16	cv_ctrl_loop_high;
	UINT16	cv_ctrl_loop_low;
	UINT16	cv_dac_max_incr;
	UINT16	cv_dac_max_decr;
	UINT16	cv_samples_needed;
	UINT16	overvoltage;
	UINT16	ci_current;
	UINT16	end_current;
	UINT16	ichg_max_spike;
	UINT16	ichg_samples_needed;
	UINT16	charge_time_limit;
	UINT16	recharge_delay;
	UINT16	bciconf;
};

/* from original PWR SWE */
typedef struct {
	UINT16		bat_voltage;
	T_PWR_PERCENT	remain_capa;
} T_PWR_THRESHOLDS;

#define	MIN_PERCENT_THRESH	5
#define	MAX_PERCENT_THRESH	21	/* allowing 5% steps */
#define	NB_BARS_THRESH		4

struct battery_config {
	UINT8			bars_thresh[NB_BARS_THRESH];
	T_PWR_THRESHOLDS	percent_thresh[MAX_PERCENT_THRESH];
};

struct bsim_config {
	UINT8	init_percent;
	UINT8	start_enable;
	UINT8	pad[2];
};

#define	ICHG_AVG_WINDOW	6

typedef struct {
	/* RiViera boilerplate */
	T_RVF_ADDR_ID		addr_id;
	T_RVF_MB_ID		prim_id;
	/* interface to upper layers */
	T_FCHG_EVENT_HANDLER	event_handler;
	/* configuration */
	struct charging_config	config;
	BOOL			config_present;
	struct battery_config	batt;
	UINT16			nb_percent_thresh;
	struct bsim_config	bsim;
	BOOL			bsim_mode;
	/* state */
	enum fchg_state		state;
	UINT16			batt_mv;
	UINT16			curr_disch_thresh;
	/* valid only during a charging cycle */
	UINT16			i2v_offset;
	UINT16			ci_ichg;
	UINT16			cv_dac_init;
	UINT16			cv_dac_curr;
	UINT16			cv_high_vbat_count;
	UINT16			cv_low_vbat_count;
	UINT16			ichg_avg_buf[ICHG_AVG_WINDOW];
	UINT16			ichg_fill_level;
	UINT16			ichg_ring_ptr;
	UINT16			ichg_average;
	UINT16			ichg_low_count;
	UINT32			start_time;
} T_PWR_CTRL_BLOCK;

#endif	/* include guard */