FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_app/lcc/lcc_handle_timers.c @ 273:5caa86ee2cfa
enable L1_NEW_AEC in l1_confg.h (bold change)
The AEC function implemented in DSP ROM 3606 on the Calypso silicon
we work with is the one that corresponds to L1_NEW_AEC; the same holds
for DSP 34 and even for DSP 33 with more recent patch versions.
However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0,
thus driving AEC the old way if anyone tried to enable it, either via
AT%Nxxxx or via the audio mode facility. As a result, the fw would
try to control features which no longer exist in the DSP (long vs short
echo and the old echo suppression level bits), while providing no way
to tune the 8 new parameter words added to the DSP's NDB page.
The only sensible solution is to bite the bullet and enable L1_NEW_AEC
in L1 config, with fallout propagating into RiViera Audio Service
T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format.
The latter fallout will be addressed in further code changes.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 29 Jul 2021 18:32:40 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/****************************************************************************** * Power Task (pwr) * Design and coding by Svend Kristian Lindholm, skl@ti.com * * Timers * * $Id: pwr_handle_timers.c 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $ * ******************************************************************************/ #ifndef __PWR_HANDLE_TIMERS_C_ #define __PWR_HANDLE_TIMERS_C_ UINT32 rvf_get_tick_count(void); void pwr_check_timers(void); T_RVM_RETURN pwr_create_timer(UINT32 *timer_begin); T_RVM_RETURN pwr_start_timer(UINT32 *timer_begin); void stop_ci_charge(void); void pwr_modulate_off(void); void pwr_send_msg(uint32 msg_id ,T_RVF_ADDR_ID src_addr_id, T_RVF_ADDR_ID dest_addr_id); int pwr_capacity(uint16 Vbat); void mmi_send_msg(struct mmi_info_ind_s *event); void end_charging_house_keeping(void); void cv_charging_house_keeping(void); // Timer functions UINT32 pwr_timer_elapsed(UINT32 time_begin, UINT32 current_timer) { // return elapsed time in [ms] return (current_timer - time_begin) * 60 / 13; } T_RVM_RETURN pwr_start_timer(UINT32 *timer_begin) { ttw(ttr(TTrTimer, "pwr_start_timer(%d)" NL, 0)); // Start timer (will be checked each time an ADC measurement is received) *timer_begin = rvf_get_tick_count(); ttw(ttr(TTrTimer, "pwr_start_timer(%d)" NL, 0xFF)); return (RV_OK); } T_RVM_RETURN pwr_stop_timer(UINT32 *timer_begin) { ttw(ttr(TTrTimer, "pwr_stop_timer(%d)" NL, 0)); *timer_begin = 0; ttw(ttr(TTrTimer, "pwr_stop_timer(%d)" NL, 0xFF)); return (RV_OK); } void pwr_stop_timers(void) { // Only stop charging related timers - not supervision timers pwr_stop_timer(&pwr_ctrl->time_begin_T1); pwr_stop_timer(&pwr_ctrl->time_begin_T2); pwr_stop_timer(&pwr_ctrl->time_begin_T3); pwr_stop_timer(&pwr_ctrl->time_begin_T4); pwr_stop_timer(&pwr_ctrl->time_begin_mod_cycle); } T_RVM_RETURN pwr_create_timer(UINT32 *timer_begin) { ttw(ttr(TTrTimer, "pwr_create_timer(%d)" NL, 0)); *timer_begin = 0; ttw(ttr(TTrTimer, "pwr_create_timer(%d)" NL, 0xFF)); return (RV_OK); } T_RV_RET process_pwr_handle_T1_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T1_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : break; case CCI : case CCV : case LCI : case LCV : // Change state pwr_ctrl->state = SUP; end_charging_house_keeping(); break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T1_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } ttw(ttr(TTrTimer, "process_pwr_handle_T1_expiration(%d)" NL, 0xFF)); pwr_free(request); } T_RV_RET process_pwr_handle_T2_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T2_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Another timer did expire prior to the T2 timer - ignore this expiration break; case CCV : case LCV : // Change state pwr_ctrl->state = SUP; end_charging_house_keeping(); break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T2_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_T2_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_T3_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T3_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Stop & reset timers pwr_stop_timers(); break; case CCI : case CCV : case LCI : case LCV : break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T3_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_T3_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_T4_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T4_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Yes - since timing issues can make this timer expire in SUP state // It can take a long time before we know if a charger has been unplugged break; case CCV : case LCV : pwr_stop_timer(&pwr_ctrl->time_begin_T4); pwr_modulate_off(); // Wait for duty cycle timer to expire before restarting this timer break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T4_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_T4_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_mod_cycle_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_mod_cycle_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Yes - since timing issues can make this timer expire in SUP state // It can take a long time before we know if a charger has been unplugged break; case CCV : case LCV : // Calculate k value // Start DC timer // Start T4 timer based on k value // Modulation ON cv_charging_house_keeping(); break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_mod_cycle_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_mod_cycle_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_mmi_info_expiration(T_PWR_REQ *request) { struct mmi_info_ind_s MMI_Event; ttw(ttr(TTrTimer, "process_pwr_handle_mmi_info_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Send MMI info events according to configured repetition interval if (pwr_ctrl->flag_mmi_registered == 1) { pwr_ctrl->mmi_ptr->header.msg_id = MMI_BAT_SUPERVISION_INFO_IND; pwr_ctrl->mmi_ptr->Vbat = pwr_cfg->data.Vbat_avg_mV; pwr_ctrl->mmi_ptr->Tbat = pwr_cfg->data.Tbat_avg; pwr_ctrl->mmi_ptr->Cbat = pwr_capacity(pwr_cfg->data.Vbat_avg_mV); mmi_send_msg(pwr_ctrl->mmi_ptr); } // Restart timer ttw(ttr(TTrTimerLow,"MMI info timer started(%d)" NL, 0)); pwr_start_timer(&pwr_ctrl->time_begin_mmi_rep); break; case INI : case CCI : case CCV : case LCI : case LCV : // DON'T send any events when charging or initializing break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_mmi_info_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_mmi_info_expiration(%d)" NL, 0xFF)); } void pwr_check_timers() { UINT32 timer; ttw(ttr(TTrTimer, "pwr_check_timers(%d)" NL, 0)); // Check timers T1, T2, T3, T4, duty cycle & mmi timer - if expired send timer expired events timer = rvf_get_tick_count(); // T1 if (pwr_ctrl->time_begin_T1 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T1 = pwr_timer_elapsed(pwr_ctrl->time_begin_T1, timer); if (pwr_ctrl->time_elapsed_T1 > pwr_cfg->bat.T1) { // EXPIRED! ttw(ttr(TTrTimer, "T1 expired (%d):" NL, pwr_ctrl->time_elapsed_T1)); // 'Stop' timer pwr_ctrl->time_elapsed_T1 = 0; pwr_ctrl->time_begin_T1 = 0; // Send timer expired event pwr_send_msg(TIMER_T1_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // T2 if (pwr_ctrl->time_begin_T2 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T2 = pwr_timer_elapsed(pwr_ctrl->time_begin_T2, timer); if (pwr_ctrl->time_elapsed_T2 > pwr_cfg->bat.T2) { // EXPIRED! ttw(ttr(TTrTimer, "T2 expired (%d):" NL, pwr_ctrl->time_elapsed_T2)); // 'Stop' timer pwr_ctrl->time_elapsed_T2 = 0; pwr_ctrl->time_begin_T2 = 0; // Send timer expired event pwr_send_msg(TIMER_T2_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // T3 if (pwr_ctrl->time_begin_T3 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T3 = pwr_timer_elapsed(pwr_ctrl->time_begin_T3, timer); if (pwr_ctrl->time_elapsed_T3 > pwr_cfg->bat.T3) { // EXPIRED! ttw(ttr(TTrTimer, "T3 expired (%d):" NL, pwr_ctrl->time_elapsed_T3)); // 'Stop' timer pwr_ctrl->time_elapsed_T3 = 0; pwr_ctrl->time_begin_T3 = 0; // Send timer expired event pwr_send_msg(TIMER_T3_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // T4 if (pwr_ctrl->time_begin_T4 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T4 = pwr_timer_elapsed(pwr_ctrl->time_begin_T4, timer); if (pwr_ctrl->time_elapsed_T4 > pwr_cfg->data.T4) { // EXPIRED! ttw(ttr(TTrTimer, "T4 expired (%d):" NL, pwr_ctrl->time_elapsed_T4)); // 'Stop' timer pwr_ctrl->time_elapsed_T4 = 0; pwr_ctrl->time_begin_T4 = 0; // Send timer expired event pwr_send_msg(TIMER_T4_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // Duty cycle timer (Lithium only) if (pwr_ctrl->time_begin_mod_cycle != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_mod_cycle = pwr_timer_elapsed(pwr_ctrl->time_begin_mod_cycle, timer); if (pwr_ctrl->time_elapsed_mod_cycle > pwr_cfg->common.mod_cycle) { // EXPIRED! ttw(ttr(TTrTimer, "DC expired (%d):" NL, pwr_ctrl->time_elapsed_mod_cycle)); // 'Stop' timer pwr_ctrl->time_elapsed_mod_cycle = 0; pwr_ctrl->time_begin_mod_cycle = 0; // Send timer expired event pwr_send_msg(TIMER_MOD_CYCLE_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // MMI repetition timer if (pwr_ctrl->time_begin_mmi_rep != 0) { // Started - but has it expired? pwr_ctrl->time_elapsed_mmi_rep = pwr_timer_elapsed(pwr_ctrl->time_begin_mmi_rep, timer); if (pwr_ctrl->time_elapsed_mmi_rep > pwr_cfg->mmi.repetition) { // EXPIRED! // 'Stop' timer pwr_ctrl->time_elapsed_mmi_rep = 0; pwr_ctrl->time_begin_mmi_rep = 0; ttw(ttr(TTrTimer, "MMI info timer expired (%d):" NL, pwr_ctrl->time_elapsed_mmi_rep)); // Send timer expired event pwr_send_msg(TIMER_MMI_INFO_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } ttw(ttr(TTrTimer, "pwr_check_timers(%d)" NL, 0xFF)); } #endif
