FreeCalypso > hg > fc-tourmaline
view cdg-hybrid/sap/ipa.pdf @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | 35f7a1dc9f7d |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : ipa.pdf ;*** Creation : Wed Mar 11 09:58:13 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : ipa ;*** Document No. : 8444.104.02.007 ;*** Document Date : 2003-08-30 ;*** Document Status: BEING_PROCESSED ;*** Document Author: Jacek ;******************************************************************************** PRAGMA SRC_FILE_TIME "Thu Nov 29 09:43:54 2007" PRAGMA LAST_MODIFIED "2003-08-30" PRAGMA ID_AND_VERSION "8444.104.02.007" CONST IPA_ENTITY_NAME_LEN 6 ; maximum length of entity name including NULL VALTAB VAL_dti_conn VAL 0 IPA_CONNECT_DTI "Connect DTI2 to IP" VAL 1 IPA_DISCONNECT_DTI "Disconnect DTI2 from IP" VALTAB VAL_link_id VAL 0 IPA_LINK_ID_DEFAULT "Default link id" VALTAB VAL_dti_direction VAL 0 IPA_DTI_TO_HIGHER_LAYER "DTI2 used normally" VAL 1 IPA_DTI_TO_LOWER_LAYER "DTI2 is inverted" VALTAB VAL_cmd VAL 0 IPA_CONFIG_UP "enable the interface" VAL 1 IPA_CONFIG_DOWN "disable the interface" VALTAB VAL_ack_flag VAL 0 IPA_CONFIG_ACK "Acknowledged" VAL 1 IPA_CONFIG_NAK "not acknowledged" VALTAB VAL_all_down VAL 0 IPA_ALLDOWN_FALSE ">= 1 Interface still up" VAL 1 IPA_ALLDOWN_TRUE "all interfaces down" VAR dti_conn "DTI2 connect" B VAL @p_ipa - VAL_dti_conn@ VAR link_id "Link identifier" L VAL @p_ipa - VAL_link_id@ VAR dti_direction "DTI2 direction" B VAL @p_ipa - VAL_dti_direction@ VAR ip "IP address" L VAR peer_ip "peer IP address" L VAR mtu "maximum transfer unit" S VAR cmd "Command" B VAL @p_ipa - VAL_cmd@ VAR ack_flag "acknowledge flag" B VAL @p_ipa - VAL_ack_flag@ VAR all_down "all interfaces down flag" B VAL @p_ipa - VAL_all_down@ VAR entity_name "name of an neighbour entity" B ; IPA_DTI_REQ 0x8000003C ; IPA_DTI_CNF 0x8000403C ; IPA_DTI_IND 0x8001403C ; IPA_CONFIG_REQ 0x8001003C ; IPA_CONFIG_CNF 0x8002403C PRIM IPA_DTI_REQ 0x8000003C { dti_conn ; DTI connect entity_name [IPA_ENTITY_NAME_LEN] ; entity name link_id ; link identifier dti_direction ; DTI direction } PRIM IPA_DTI_CNF 0x8000403C { dti_conn ; DTI connect link_id ; link identifier } PRIM IPA_DTI_IND 0x8001403C { link_id ; link identifier } PRIM IPA_CONFIG_REQ 0x8001003C { ip ; IP address peer_ip ; peer IP address mtu ; Maximum transfer unit cmd ; Command } PRIM IPA_CONFIG_CNF 0x8002403C { ack_flag ; Acknowledge flag all_down ; all interfaces down flag }