view lunalcd2/src/vsrc/lcd_module.v @ 84:dbd57e8dd82a default tip

sim-fpc-pasv/pcb: add Makefile for Gerber output
author Mychaela Falconia <falcon@freecalypso.org>
date Wed, 02 Nov 2022 07:22:44 +0000
parents d5d14b426faa
children
line wrap: on
line source

module lcd_module (GND, VCI, IOVCC, DB, RD, WR, RS, CS, RESET, IM0, LEDA, LEDK);

input GND, VCI, IOVCC;
inout [15:0] DB;
input RD, WR, RS, CS, RESET, IM0;
input LEDA;
input [1:3] LEDK;

/* instantiate the package; the mapping of signals to pins is defined here */

lcd_module_fp pkg (.pin_1(DB[15]),
		   .pin_2(DB[14]),
		   .pin_3(DB[13]),
		   .pin_4(DB[12]),
		   .pin_5(DB[11]),
		   .pin_6(DB[10]),
		   .pin_7(DB[9]),
		   .pin_8(DB[8]),
		   .pin_9(GND),
		   .pin_10(DB[7]),
		   .pin_11(DB[6]),
		   .pin_12(DB[5]),
		   .pin_13(DB[4]),
		   .pin_14(DB[3]),
		   .pin_15(DB[2]),
		   .pin_16(DB[1]),
		   .pin_17(DB[0]),
		   .pin_18(IOVCC),
		   .pin_19(VCI),
		   .pin_20(RD),
		   .pin_21(WR),
		   .pin_22(RS),
		   .pin_23(CS),
		   .pin_24(RESET),
		   .pin_25(IM0),
		   .pin_26(GND),
		   .pin_27(LEDA),
		   .pin_28(LEDK[1]),
		   .pin_29(LEDK[2]),
		   .pin_30(LEDK[3]),
		   /* the remaining pins are NC */
		   .pin_31(),
		   .pin_32(),
		   .pin_33(),
		   .pin_34(),
		   .pin_35(),
		   .pin_36()
	);

endmodule