--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/configure-gcc.sh	Sat Jul 21 00:32:56 2018 +0000
@@ -0,0 +1,281 @@
+#!/bin/sh
+
+set -e
+
+if [ ! -f configure-gcc.sh ]
+then
+	echo "This script needs to be run from the top of the source tree" 1>&2
+	exit 1
+fi
+
+if [ ! -f helpers/makeline ]
+then
+	echo "Please run make in the helpers directory first" 1>&2
+	exit 1
+fi
+
+# start looking at our invokation line
+
+if [ "$1" = --clean ]
+then
+	clean_flag=1
+	shift
+else
+	clean_flag=0
+fi
+
+if [ $# -lt 1 ]
+then
+	echo "usage: $0 [--clean] target [vars]" 1>&2
+	exit 1
+fi
+
+TARGET="$1"
+
+if [ ! -f "targets/$TARGET.conf" -o ! -f "targets/$TARGET.h" ]
+then
+	echo "Error: target $TARGET not known" 1>&2
+	exit 1
+fi
+
+if [ ! -f "targets/$TARGET.m4" ]
+then
+	echo "Error: target $TARGET is not supported with gcc" 1>&2
+fi
+
+# target defaults that can be overridden by $TARGET.conf
+
+CHIPSET=10
+DSP=36
+RF=12
+DISABLE_SLEEP=0
+
+. "targets/$TARGET.conf"
+
+BUILD_DIR="build-$TARGET-gcc"
+
+# settings derived from the target-defined DSP version
+
+case "$DSP" in
+	33)
+		AMR=0
+		L1_DYN_DSP_DWNLD=0
+		L1_VOICE_MEMO_AMR=0
+		MELODY_E2=0
+		SPEECH_RECO=0
+		;;
+	34)
+		AMR=1
+		L1_DYN_DSP_DWNLD=0
+		L1_VOICE_MEMO_AMR=0
+		MELODY_E2=0
+		SPEECH_RECO=0
+		;;
+	36)
+		AMR=1
+		L1_DYN_DSP_DWNLD=1
+		L1_VOICE_MEMO_AMR=1
+		MELODY_E2=1
+		SPEECH_RECO=1
+		;;
+	*)
+		echo "Error: DSP=$DSP setting not understood" 1>&2
+		exit 1
+esac
+
+# miscellaneous configurable feature settings
+
+ALLOW_CSIM_GSM=1
+SERIAL_DYNAMIC_SWITCH=0
+TR_BAUD_CONFIG=TR_BAUD_115200
+
+# allow the user to override these defaults
+
+shift
+while [ $# != 0 ]
+do
+	eval "$1"
+	shift
+done
+
+echo "Building firmware for target $TARGET in $BUILD_DIR"
+
+if [ "$clean_flag" = 1 ]
+then
+	rm -rf $BUILD_DIR
+fi
+mkdir -p $BUILD_DIR
+
+# shell functions to be used in the configuration recipe
+
+build_lib() {
+	if [ $# != 1 ]
+	then
+		echo "Error: build_lib takes 1 argument" 1>&2
+		exit 1
+	fi
+	scripts/mk-component-gcc.sh "$1"
+	SUBDIR="$SUBDIR $1"
+	LIBS="$LIBS $1/$1.a"
+}
+
+# invoke the configuration recipe
+
+export BUILD_DIR TARGET
+export CHIPSET DSP RF
+export AMR L1_DYN_DSP_DWNLD L1_VOICE_MEMO_AMR MELODY_E2 SPEECH_RECO
+export DISABLE_SLEEP
+export ALLOW_CSIM_GSM SERIAL_DYNAMIC_SWITCH TR_BAUD_CONFIG
+export GPRS SRVC FCHG_STATE
+
+scripts/config-headers.sh
+
+SUBDIR=
+LIBS=
+
+build_lib ccddata
+
+# ACI libs
+build_lib aci
+build_lib aciext
+build_lib aci_dti_mng
+build_lib atiext
+build_lib comlib
+
+if [ "$GPRS" = 1 ]
+then
+	build_lib config_gprs_fl
+	build_lib config_gprs_ir
+else
+	build_lib config_gsm_fl
+	build_lib config_gsm_ir
+fi
+
+# G23M protocol stack libs
+build_lib alr
+build_lib cc
+build_lib dl
+build_lib dti
+build_lib l1_pei
+build_lib mm
+build_lib rr
+build_lib sim_b_lib
+build_lib sms
+build_lib ss
+build_lib uart_b_lib
+
+# fax and data
+if [ "$SRVC" != 0 ]
+then
+	build_lib l2r
+	build_lib ra
+	build_lib rlp
+fi
+
+# fax specific
+if [ "$SRVC" = 1 ]
+then
+	build_lib fad
+	build_lib t30
+fi
+
+# GPRS specific
+if [ "$GPRS" = 1 ]
+then
+	build_lib cci
+	build_lib cci_ir
+	build_lib cl
+	build_lib gmm
+	build_lib grlc
+	build_lib grlc_ir
+	build_lib grr
+	build_lib llc
+	build_lib sm
+	build_lib sndcp
+	build_lib ppp
+	build_lib ppp_ir
+	build_lib upm
+fi
+
+# Condat drivers
+build_lib gdi
+
+# GPF
+build_lib ccd_na7_db
+build_lib frame_na7_db_fl
+build_lib frame_na7_db_ir
+build_lib misc_na7_db_fl
+build_lib misc_na7_db_ir
+build_lib osx_na7_db
+build_lib tif_na7_db_fl
+build_lib tif_na7_db_ir
+
+# core drivers
+build_lib drivers_flash
+
+# Layer 1
+build_lib tpudrv
+build_lib l1_ext
+build_lib l1_int
+build_lib l1_custom_ext
+build_lib l1_custom_int
+
+build_lib riviera_core_flash
+build_lib riviera_cust_flash
+
+# services
+build_lib audio
+build_lib audio_bgd
+build_lib cst
+build_lib dar
+build_lib dar_gbl_var
+build_lib etm
+build_lib lls
+
+# app drivers
+build_lib abb
+build_lib buzzer
+if [ "$FCHG_STATE" = 1 ]
+then
+	build_lib fchg
+fi
+build_lib ffs
+build_lib ffs_drv
+build_lib ffs_pcm
+build_lib kpd
+build_lib power
+build_lib rtc_drv
+build_lib sim_drv
+build_lib spi_drv
+build_lib uart_drv
+
+# system glue
+build_lib main
+build_lib main_ir
+
+# Nucleus
+build_lib nucleus_flash
+build_lib nucleus_intram
+
+# selective libc replacement
+build_lib libsys_fl
+build_lib libsys_ir
+
+# generate the top level Makefile!
+
+helpers/makeline def TARGET $TARGET > $BUILD_DIR/Makefile
+echo >> $BUILD_DIR/Makefile
+helpers/makeline def SUBDIR $SUBDIR >> $BUILD_DIR/Makefile
+echo >> $BUILD_DIR/Makefile
+helpers/makeline def LIBS $LIBS >> $BUILD_DIR/Makefile
+echo >> $BUILD_DIR/Makefile
+
+helpers/makeline def FLASH_BASE_ADDR $FLASH_BASE_ADDR >> $BUILD_DIR/Makefile
+helpers/makeline def FLASH_SECTOR_SIZE $FLASH_SECTOR_SIZE >> $BUILD_DIR/Makefile
+echo >> $BUILD_DIR/Makefile
+
+cat gcc/makefile-body >> $BUILD_DIR/Makefile
+
+# All done!
+
+echo "Run make in $BUILD_DIR to compile the firmware"