FreeCalypso > hg > fc-magnetite
changeset 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 22 Dec 2019 21:24:29 +0000 |
| parents | df3649549840 |
| children | 916b27af1c6c |
| files | src/cs/drivers/drv_app/ffs/board/dev.c |
| diffstat | 1 files changed, 1 insertions(+), 4 deletions(-) [+] |
line wrap: on
line diff
--- a/src/cs/drivers/drv_app/ffs/board/dev.c Sun Dec 22 00:23:38 2019 +0000 +++ b/src/cs/drivers/drv_app/ffs/board/dev.c Sun Dec 22 21:24:29 2019 +0000 @@ -126,10 +126,7 @@ { 0x780000, 18 }, { 0x7C0000, 18 } }; -#endif -#if defined(CONFIG_TARGET_LEONARDO) || defined(CONFIG_TARGET_PIRELLI) || \ - defined(CONFIG_TARGET_FCFAM) // 128x64kb static const struct block_info_s flash_128x64[] = { @@ -547,7 +544,7 @@ { &flash_16x64[0], (char *) 0x700000, MANUFACT_FUJITSU, 0x0201, FFS_DRIVER_AMD_SB, 15 }, -#ifdef CONFIG_TARGET_LEONARDO +#if 0 // Fujitsu MB84VF5F5F4J2 stacked device. Using the 2nd sub device // The 8x8 are located both in top and bottom, thus only 126 // blocks are used.