FreeCalypso > hg > fc-magnetite

view src/cs/services/atp/atp_uart_env.h @ 624:012028896cfb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/********************************************************************************/
/*                                                                              */
/*    File Name:         atp_uart_env.h                                         */
/*                                                                              */
/*    Purpose:           This header file contains the prototypes used to:      */
/*                          - get some information about the ATP-UART           */
/*                            interface, such as its name or the memory         */
/*                            requirements,                                     */
/*                          - set the memory bank identifier dedicated to the   */
/*                            ATP-UART interface,                               */
/*                          - initialize the ATP-UART interface,                */
/*                          - activate the ATP-UART interface,                  */
/*                          - prepare the termination of the ATP-UART           */
/*                            interface,                                        */
/*                          - kill the ATP-UART interface.                      */
/*                                                                              */
/*    Note:              None.                                                  */
/*                                                                              */
/*    Revision History:                                                         */
/*       10/04/01        Pascal Pompei                                          */
/*                          - Create.                                           */
/*                                                                              */
/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved.   */
/*                                                                              */
/********************************************************************************/
#ifndef _ATP_UART_ENV_
#define _ATP_UART_ENV_

#include "atp/atp_pool_size.h"	/* Stack & Memory Bank sizes definitions */

/****************************** MEMORY REQUIREMENTS *****************************/
/*                                                                              */
/* Define the memory requirements of the ATP-UART interface.                    */
#define ATP_UART_MB_PRIM_SIZE          ATP_UART_MB1_SIZE
#define ATP_UART_MB_PRIM_WATERMARK     (ATP_UART_MB_PRIM_SIZE - 256)


/*************************** LOCAL FUNCTION PROTOTYPES **************************/
/*                                                                              */
/* Define the local fonction prototypes.                                        */
T_RVM_RETURN atp_uart_get_info (T_RVM_INFO_SWE  *info_software_entity_p);

T_RVM_RETURN atp_uart_set_info (T_RVF_ADDR_ID  addr_id,
								T_RV_RETURN    return_path_p[],
								T_RVF_MB_ID    *mb_id_p,
								T_RVM_CB_FUNC  error_function_p);

T_RVM_RETURN atp_uart_init (void);

T_RVM_RETURN atp_uart_core (void);

T_RVM_RETURN atp_uart_stop (void);

T_RVM_RETURN atp_uart_kill (void);
#endif