FreeCalypso > hg > fc-magnetite
view src/cs/services/atp/atp_uart_api.c @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 22 Dec 2019 21:24:29 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/********************************************************************************/ /* */ /* File Name: atp_uart_api.c */ /* */ /* Purpose: This file contains the external functions related to */ /* the ATP-UART interface. */ /* */ /* Note: None. */ /* */ /* Revision History: */ /* 10/04/01 Pascal Pompei */ /* - Create. */ /* */ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved. */ /* */ /********************************************************************************/ #include "atp/atp_uart_i.h" #include "rvm/rvm_use_id_list.h" /********************************************************************************/ /* */ /* Function Name: atp_uart_open_com_port */ /* */ /* Purpose: This function instructs the ATP-UART interface to open */ /* the COM port. */ /* */ /* Input Parameters: */ /* com_port - Contains the COM port number. */ /* baud_rate - Contains the baud rate (in bits per second). */ /* */ /* Output Parameters: None. */ /* */ /* Global Parameters: None. */ /* */ /* Note: None. */ /* */ /* Revision History: */ /* 10/04/01 Pascal Pompei */ /* - Create. */ /* */ /********************************************************************************/ T_ATP_UART_ERROR_CODES atp_uart_open_com_port (T_ATP_UART_COM_PORT com_port, T_ATP_UART_BAUD_RATE baud_rate) { /* Declare a local variable. */ T_ATP_UART_OPEN_COM_PORT *open_com_port_p = NULL; /******************** atp_uart_open_com_port function begins ********************/ /* Allocate memory required to instruct the ATP-UART interface to open the */ /* COM port. If insufficient resources, then report an internal memory */ /* error and abort. */ if (rvf_get_buf (gbl_atp_uart_ctrl_blk_p->mb_id, \ sizeof (T_ATP_UART_OPEN_COM_PORT), \ (T_RVF_BUFFER **) (&open_com_port_p)) == RVF_RED) { rvf_send_trace (" ATP-UART (api). Insufficient resources ", 41, NULL_PARAM, RV_TRACE_LEVEL_WARNING, ATP_USE_ID); return (RV_MEMORY_ERR); } /* Fill the 'ATP-UART Open COM Port' header up. */ (open_com_port_p->os_header).msg_id = ATP_UART_OPEN_COM_PORT; (open_com_port_p->os_header).src_addr_id = RVF_INVALID_ADDR_ID; (open_com_port_p->os_header).callback_func = NULL; /* Fill the 'ATP-UART Open COM Port' payload up. */ open_com_port_p->com_port = com_port; open_com_port_p->baud_rate = baud_rate; /* Send the 'ATP-UART Open COM Port' notification to the ATP-UART */ /* interface. */ return (rvf_send_msg (gbl_atp_uart_ctrl_blk_p->addr_id, \ open_com_port_p)); } /******************* End of atp_uart_open_com_port function *******************/ /********************************************************************************/ /* */ /* Function Name: atp_uart_start_gsm */ /* */ /* Purpose: This function instructs the ATP-UART interface to */ /* initiate using the GSM protocol stack. */ /* */ /* Input Parameters: None. */ /* */ /* Output Parameters: None. */ /* */ /* Global Parameters: None. */ /* */ /* Note: The GSM protocol stack is initialized by invoking the */ /* following AT commands: */ /* AT+CFUN=1 : Set Phone Functionality (Full), */ /* AT+COPS=0 : Operator Selection. */ /* */ /* Revision History: */ /* 09/26/02 Pascal Pompei */ /* - Create. */ /* */ /********************************************************************************/ T_ATP_UART_ERROR_CODES atp_uart_start_gsm (void) { /* Declare a local variable. */ T_ATP_UART_START_GSM *start_gsm_p = NULL; /********************** atp_uart_start_gsm function begins **********************/ /* Allocate memory required to instruct the ATP-UART interface to initiate */ /* using the GSM protocol stack. If insufficient resources, then report an */ /* internal memory error and abort. */ if (rvf_get_buf (gbl_atp_uart_ctrl_blk_p->mb_id, \ sizeof (T_ATP_UART_START_GSM), \ (T_RVF_BUFFER **) (&start_gsm_p)) == RVF_RED) { rvf_send_trace (" ATP-UART (api). Insufficient resources ", 41, NULL_PARAM, RV_TRACE_LEVEL_WARNING, ATP_USE_ID); return (RV_MEMORY_ERR); } /* Fill the 'ATP-UART Start GSM' header up. */ (start_gsm_p->os_header).msg_id = ATP_UART_START_GSM; (start_gsm_p->os_header).src_addr_id = RVF_INVALID_ADDR_ID; (start_gsm_p->os_header).callback_func = NULL; /* Send the 'ATP-UART Start GSM' notification to the ATP-UART interface. */ return (rvf_send_msg (gbl_atp_uart_ctrl_blk_p->addr_id, \ start_gsm_p)); } /********************* End of atp_uart_start_gsm function *********************/