FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_app/uart/faxdata.h @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 22 Dec 2019 21:24:29 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/******************************************************************************* * * FAXDATA.H * * This module defines constants used by UART and USART fax/data drivers. * * (C) Texas Instruments 1999 * ******************************************************************************/ #ifndef __FAXDATA_H__ #define __FAXDATA_H__ /* * Returned values. */ #define FD_OK ( 0) #define FD_SUSPENDED (-1) #define FD_NOT_SUPPORTED (-2) #define FD_NOT_READY (-3) #define FD_INTERNAL_ERR (-9) /* * Line status. */ #define FD_LINE_ON (1) #define FD_LINE_OFF (0) /* * Signals used in UAF_xxx_GetLineState and UAF_xxx_SetLineState. */ #define CTS ( 0) /* set */ #define RTS ( 1) /* get */ #define DSR ( 2) /* set */ #define DTR ( 3) /* get */ #define DCD ( 4) /* set */ #define BRK ( 5) /* set/get */ #define ESC ( 6) /* get */ #define TXSTP ( 7) /* get */ #define RXSTP ( 8) /* get */ #define BRKLEN ( 9) /* set/get (8 bits) */ #define RXBLEV (17) /* get (12 bits) */ #define SA (29) /* set/get */ #define SB (30) /* set/get */ #define X (31) /* set/get */ #define RI (1) /* * Size of the circular buffers used in the driver. */ #define FD_MAX_BUFFER_SIZE (512) /* In bytes. */ /* * Type of the returned value for each function. */ typedef short T_FDRET; /* * Baud rates. */ typedef enum { FD_BAUD_AUTO, FD_BAUD_75, FD_BAUD_150, FD_BAUD_300, FD_BAUD_600, FD_BAUD_1200, FD_BAUD_2400, FD_BAUD_4800, FD_BAUD_7200, FD_BAUD_9600, FD_BAUD_14400, FD_BAUD_19200, FD_BAUD_28800, FD_BAUD_33900, FD_BAUD_38400, FD_BAUD_57600, FD_BAUD_115200, FD_BAUD_203125, FD_BAUD_406250, FD_BAUD_812500 } T_baudrate; /* * Bits per character. */ typedef enum { bpc_7, bpc_8 } T_bitsPerCharacter; /* * Stop bits. */ typedef enum { sb_1, sb_2 } T_stopBits; /* * Parity. */ typedef enum { pa_none, pa_even, pa_odd, pa_space } T_parity; /* * Flow control mode. */ typedef enum { fc_none, fc_rts, fc_dtr, fc_xoff } T_flowCtrlMode; /* * Suspend parameter used in UAF_xxx_ReadData and UAF_xxx_WriteData. */ typedef enum { sm_noSuspend, sm_suspend } T_suspendMode; /* * Install mode parameter used in UAF_xxx_ReadData and UAF_xxx_WriteData. */ typedef enum { rm_notDefined, rm_reInstall, rm_noInstall } T_reInstMode; #endif /* __FAXDATA_H__ */
