FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_app/spi/spi_process.h @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 22 Dec 2019 21:24:29 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/*****************************************************************************/ /* */ /* Name spi_process.h */ /* */ /* Function this file contains the spi_process function prototype, */ /* used to handle messages received in the SPI task mailbox. */ /* */ /* Version 0.1 */ /* */ /* Date Modification */ /* ------------------------------------ */ /* */ /* Author Candice Bazanegue */ /* */ /* (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved */ /*****************************************************************************/ #ifndef __SPI_PROCESS_H__ #define __SPI_PROCESS_H__ #define SPI_ABB_READ_EVT 1 #define SPI_ABB_WRITE_EVT 2 #define SPI_ABB_CONF_ADC_EVT 3 #define SPI_ABB_READ_ADC_EVT 4 #define ABB_EXT_IRQ_EVT 5 /* Prototypes */ /******************************************************************************* ** Function spi_process ** ** Description It is called by the spi task core to handle the access to ** the ABB through the SPI in a non-preemptive way. ** *******************************************************************************/ UINT8 spi_process(T_RV_HDR * msg_ptr); #endif /* __SPI_PROCESS_H__ */
