FreeCalypso > hg > fc-magnetite

view src/cs/drivers/drv_app/pwr/pwr_analog_dev.h @ 624:012028896cfb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents fb95e3f83dc5
children
line wrap: on
line source

/*******************************************************************************
 *
 * pwr_analog_dev.h
 *
 * Purpose: This file contains definitions that can be used by any SWE
 *          for power management services.
 *
 * Author    Candice Bazanegue (c-brille@ti.com)
 *
 * (C) Texas Instruments 2001
 *
 ******************************************************************************/

#ifndef __PWR_ANALOG_DEV_H__
#define __PWR_ANALOG_DEV_H__

#ifndef _WINDOWS
   #include "chipset.cfg"
#endif

/* Constants relative to the analog device */

#if (ANLG_FAM == 1) 

#define VOLTAGE_LOOP_OFFSET   400   /* (mV) measured */
#define MADC_OFFSET           160   /* (mV) measured */

#define DAC_THRESHOLD         240   /* (mV) spec */
#define DAC_VOLTAGE_STEP      1875  /* (uV) spec */
#define DAC_CURRENT_STEP      937   /* (uA) */
#define MADC_VOLTAGE_STEP     1710  /* (uV) spec */
#define MADC_CURRENT_STEP     855   /* (uA) spec */

#elif (ANLG_FAM == 2)

#define VOLTAGE_LOOP_OFFSET   200   /* (mV) measured */
#define MADC_OFFSET           160   /* (mV) measured */

#define DAC_THRESHOLD         0     /* (mV) spec */
#define DAC_VOLTAGE_STEP      1710  /* (uV) spec */
#define DAC_CURRENT_STEP      855   /* (uA) */
#define MADC_VOLTAGE_STEP     1710  /* (uV) spec */
#define MADC_CURRENT_STEP     855   /* (uA) spec */

#endif	// ANLG_FAM

#endif /* __PWR_ANALOG_DEV_H__ */