FreeCalypso > hg > fc-magnetite
view scripts/mk-component.sh @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 22 Dec 2019 21:24:29 +0000 |
parents | 0198ac1e1a4f |
children |
line wrap: on
line source
#!/bin/sh if [ $# -lt 1 -o $# -gt 2 ] then echo "usage: $0 component-lib [flavor]" 1>&2 exit 1 fi LIBNAME="$1" if [ -n "$2" ] then recipe_file="components/$1-$2" else recipe_file="components/$1" fi if [ ! -f "$recipe_file" ] then echo "Error: $recipe_file not found" 1>&2 exit 1 fi if [ -z "$BUILD_DIR" ] then echo "Error: BUILD_DIR= must be passed via environment" 1>&2 exit 1 fi set -e mkdir -p $BUILD_DIR/$LIBNAME # beginning of the Makefile echo "all: $LIBNAME.lib" > $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile # shell functions to be used in the recipes make_version() { case $# in 1) echo "$1_version.c:" >> $BUILD_DIR/$LIBNAME/Makefile echo " ../../scripts/make-version.sh $1 > $1_version.c" \ >> $BUILD_DIR/$LIBNAME/Makefile ;; 2) echo "$2_version.c:" >> $BUILD_DIR/$LIBNAME/Makefile echo " ../../scripts/make-version.sh $1 > $2_version.c" \ >> $BUILD_DIR/$LIBNAME/Makefile ;; *) echo "Error: make_version takes 1 or 2 arguments" 1>&2 exit 1 ;; esac echo >> $BUILD_DIR/$LIBNAME/Makefile } asm_file() { if [ $# != 1 ] then echo "Error: asm_file takes 1 argument" 1>&2 exit 1 fi objname=`basename "$1" .s`.obj helpers/makeline dep $objname "$1" >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd ../../toolwrap/asm470 ${ASMFLAGS} "$1" '$@' \ >> $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile OBJS="$OBJS $objname" } cfile_plain() { if [ $# != 1 ] then echo "Error: cfile_plain takes 1 argument" 1>&2 exit 1 fi objname=`basename "$1" .c`.obj helpers/makeline dep $objname "$1" >> $BUILD_DIR/$LIBNAME/Makefile case "$objname" in *[A-Z]*) helpers/makeline cmd rm -f '$@' \ >> $BUILD_DIR/$LIBNAME/Makefile ;; esac helpers/makeline cmd ../../toolwrap/cl470 -q -c ${CFLAGS} ${CPPFLAGS} \ "$1" >> $BUILD_DIR/$LIBNAME/Makefile case "$objname" in *[A-Z]*) objname_lc=`echo $objname | tr A-Z a-z` helpers/makeline cmd mv $objname_lc $objname \ >> $BUILD_DIR/$LIBNAME/Makefile ;; esac echo >> $BUILD_DIR/$LIBNAME/Makefile OBJS="$OBJS $objname" } cfile_str2ind() { if [ $# != 1 ] then echo "Error: cfile_str2ind takes 1 argument" 1>&2 exit 1 fi if [ "$USE_STR2IND" = 1 ] then objname=`basename "$1" .c`.obj pp_name=`echo $1 | sed -e 's/\.c$/.pp/' | tr A-Z a-z` pp__name=`echo $1 | sed -e 's/\.c$/.pp_/' | tr A-Z a-z` helpers/makeline dep $objname "$1" \ >> $BUILD_DIR/$LIBNAME/Makefile case "$objname" in *[A-Z]*) helpers/makeline cmd rm -f '$@' \ >> $BUILD_DIR/$LIBNAME/Makefile ;; esac helpers/makeline cmd ../../toolwrap/cl470 -q -po -p? -x \ ${CPPFLAGS} "$1" >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd ../../toolwrap/str2ind -a \ -t ../str2ind.tab -l ../str2ind.log \ -f "$pp_name" >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd ../../toolwrap/cl470 -q -c ${CFLAGS} \ "$pp__name" >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd @rm -f "$pp_name" \ >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd @rm -f "$pp__name" \ >> $BUILD_DIR/$LIBNAME/Makefile case "$objname" in *[A-Z]*) objname_lc=`echo $objname | tr A-Z a-z` helpers/makeline cmd mv $objname_lc $objname \ >> $BUILD_DIR/$LIBNAME/Makefile ;; esac echo >> $BUILD_DIR/$LIBNAME/Makefile OBJS="$OBJS $objname" else cfile_plain "$1" fi } cfile_symlink() { if [ $# != 1 ] then echo "Error: cfile_symlink takes 1 argument" 1>&2 exit 1 fi localcopy=`basename "$1"` echo "$localcopy:" >> $BUILD_DIR/$LIBNAME/Makefile echo " ln -s $1 ." >> $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile cfile_plain $localcopy } # invoke the recipe SRC=../../src OBJS= . "$recipe_file" # finish the Makefile helpers/makeline dep $LIBNAME.lib ${OBJS} >> $BUILD_DIR/$LIBNAME/Makefile echo ' ../../toolwrap/ar470 r $@ $^' >> $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile echo 'clean:' >> $BUILD_DIR/$LIBNAME/Makefile echo ' rm -f *.obj *.lib *.c' >> $BUILD_DIR/$LIBNAME/Makefile