view cdg211/prim/rrrrlp.pdf @ 624:012028896cfb

FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 56abf6cf8a0b
children
line wrap: on
line source

;********************************************************************************
;*** File           : rrrrlp.pdf
;*** Creation       : Fri Jun 08 13:58:29 CST 2007
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : rrrrlp
;*** Document No.   : 0000.000.00.002
;*** Document Date  : 2002-09-10
;*** Document Status: BEING_PROCESSED
;*** Document Author: VK
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Mon Nov 24 15:51:14 2003"
PRAGMA 	LAST_MODIFIED 	"2002-09-10"
PRAGMA 	ID_AND_VERSION 	"0000.000.00.002"



CONST 	MAX_SDU_LEN 	1 	; 
CONST 	MAX_NCELL_L1 	12 	; Max no. of NC layer 1 is able to measure
CONST 	MAX_NCELL_EOTD 	15 	; Max no. of NC reported in the Measurement Assistance Data Element (3GPP 04.31)
CONST 	MAX_NCELL_EOTD_SI 	32 	; Max no. of NC reported in the Measurement Assistance Data SI List Element (3GPP 04.31)






VAR 	dummy 	"Dummy" 	B


VAR 	l_buf 	"length in bits" 	S


VAR 	o_buf 	"offset in bits" 	S


VAR 	buf 	"bit buffer" 	B


VAR 	cr 	"Command or Response" 	B





COMP 	sdu 	 "Service Data Unit"
{
 	l_buf 	 ; length in bits
 	o_buf 	 ; offset in bits
 	buf 	[MAX_SDU_LEN] 	 ; bit buffer
}






; RRRRLP_DATA_IND 	0x80004041
; RRRRLP_DATA_REQ 	0x80000041
; RRRRLP_DATA_CNF 	0x80014041
; RRRRLP_ERROR_IND 	0x80024041



PRIM 	RRRRLP_DATA_IND 	0x80004041
{
 	cr 	 ; Command / Response
 	sdu 	 ; APDU_IND
}






PRIM 	RRRRLP_DATA_REQ 	0x80000041
{
 	cr 	 ; Command / Response
 	sdu 	 ; APDU_REQ
}






PRIM 	RRRRLP_DATA_CNF 	0x80014041
{
 	dummy 	 ; Dummy
}






PRIM 	RRRRLP_ERROR_IND 	0x80024041
{
 	dummy 	 ; Dummy
}