FreeCalypso > hg > fc-magnetite

view cdg211/prim/mdl.pdf @ 624:012028896cfb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 56abf6cf8a0b
children
line wrap: on
line source

;********************************************************************************
;*** File           : mdl.pdf
;*** Creation       : Fri Jun 08 13:57:47 CST 2007
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : mdl
;*** Document No.   : 6147.111.97.101
;*** Document Date  : 2002-04-19
;*** Document Status: BEING_PROCESSED
;*** Document Author: SBK
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Mon Nov 24 15:49:58 2003"
PRAGMA 	LAST_MODIFIED 	"2002-04-19"
PRAGMA 	ID_AND_VERSION 	"6147.111.97.101"






VALTAB 	VAL_ch_type
VAL 	0 	CH_TYPE_SACCH 	"SACCH"
VAL 	1 	CH_TYPE_SDCCH 	"SDCCH"
VAL 	2 	CH_TYPE_FACCH 	"FACCH"
VAL 	3 	CH_TYPE_BCCH 	"BCCH"
VAL 	4 	CH_TYPE_CCCH 	"CCCH"
VAL 	5 	CH_TYPE_RACH 	"RACH"
VAL 	6 	CH_TYPE_NBR_CEL_BCCH 	"Neighbour Cell BCCH"

VALTAB 	VAL_sapi
VAL 	0 	SAPI_0 	"SAPI 0"
VAL 	3 	SAPI_3 	"SAPI 3"

VALTAB 	VAL_cs
VAL 	0 	CS_T200_EXP 	"T200 expired (N200 + 1 times)"
VAL 	1 	CS_REEST_REQ 	"re-establishment request"
VAL 	2 	CS_UNSOL_UA_RESP 	"unsolicited UA response"
VAL 	3 	CS_UNSOL_DM_RESP 	"unsolicited DM response"
VAL 	4 	CS_UNSOL_DM_RESP_MULT_FRM 	"unsolicited DM response, multiple frame established state"
VAL 	5 	CS_UNSOL_SUP_RESP 	"unsolicited supervisory response"
VAL 	6 	CS_SEQ_ERR 	"sequence error"
VAL 	7 	CS_UFRM_W_INC_PARA 	"U frame with incorrect parameters"
VAL 	8 	CS_SFRM_W_INC_PARA 	"S frame with incorrect parameters"
VAL 	9 	CS_IFRM_W_INC_MBIT 	"I frame with incorrect use of M bit"
VAL 	10 	CS_IFRM_W_INC_LEN 	"I frame with incorrect length"
VAL 	11 	CS_FRM_NOT_IMPL 	"frame not implemented"
VAL 	12 	CS_SABM_MULT_FRM 	"SABM command, multiple frame established state"
VAL 	13 	CS_SABM_NO_INFO 	"SABM command with information field not allowed in this state"
VAL 	14 	CS_NR_SEQ_ERR 	"sequence error, perform abnormal release"




VAR 	ch_type 	"channel type" 	B

VAL 	@p_mdl - VAL_ch_type@ 	

VAR 	sapi 	"service access point identifier" 	B

VAL 	@p_mdl - VAL_sapi@ 	

VAR 	cs 	"error cause" 	B

VAL 	@p_mdl - VAL_cs@ 	







; MDL_ERROR_IND 	0x80000004
; MDL_RELEASE_REQ 	0x80004004



PRIM 	MDL_ERROR_IND 	0x80000004
{
 	ch_type 	 ; channel type
 	sapi 	 ; service access point identifier
 	cs 	 ; error cause
}






PRIM 	MDL_RELEASE_REQ 	0x80004004
{
 	ch_type 	 ; channel type
 	sapi 	 ; service access point identifier
}