# HG changeset patch # User Mychaela Falconia # Date 1446684563 0 # Node ID d40d3fcff946bd48f647995f675a1964a7e1cd68 # Parent 783f658a3d0720944e4075afa16d77f3a116931d gdi display.c: converted to UNIX line endings before editing diff -r 783f658a3d07 -r d40d3fcff946 g23m/condat/com/src/driver/display.c --- a/g23m/condat/com/src/driver/display.c Thu Nov 05 00:46:18 2015 +0000 +++ b/g23m/condat/com/src/driver/display.c Thu Nov 05 00:49:23 2015 +0000 @@ -1,5222 +1,5222 @@ -/* -+----------------------------------------------------------------------------- -| Project : -| Modul : display.c -+----------------------------------------------------------------------------- -| Copyright 2002 Texas Instruments Berlin, AG -| All rights reserved. -| -| This file is confidential and a trade secret of Texas -| Instruments Berlin, AG -| The receipt of or possession of this file does not convey -| any rights to reproduce or disclose its contents or to -| manufacture, use, or sell anything it may describe, in -| whole, or in part, without the specific written consent of -| Texas Instruments Berlin, AG. -+----------------------------------------------------------------------------- -| Purpose : -+----------------------------------------------------------------------------- -*/ -/* - Nov 04, 2005 DR: OMAPS00052595 - Description: Simulation build fails for Locosto - Solution : This function is not being used for the simulation build hence - the contents of the same are put under the compiler flag #ifndef WIN32 - - - Nov 02, 2005 DR: OMAPS00051051 - xpradipg - Description:The display is cluttered when the camera is in the viewfinder - mode for a long time - Solution: The check for requested state and current state is moved before - the assignment of the current state with the requested state. - - Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg - Description: Locosto: MIgration to New LCD APIs - Solution: Migrated to New APIs by replacing the old driver APIs with - corresponding New LCD APIs - xrashmic 22 Aug, 2004 MMI-SPR-32798 - Adding the support for screen capture using a dynamically assigned key. - - July 1, 2005 REF: CRR 32677 - xpradipg - Description: Alignmnet of the display for each row. Send the un negated value to LCD driver - Solution: The alignment of the display is corrected by decreasing the number of columns by 1. - The negated value is corrected and sent to the driver - - June 03, 2005 REF: GSM-ENH-31636 xpradipg - Description: Change the board ID for Isample to 71 and add new defination - for the CALLISTO with baord ID 70 - Solution: Add the definition of ALLISTO with board ID 70 and change the - board Id to 71 for Isample - - Mar 30, 2005 REF: CRR 29986 xpradipg - Description: Optimisation 1: Removal of unused variables and dynamically - allocate/ deallocate mbndata - Solution: removed the unused variable pictureCopy_col and the static - qualifier so as to be accessed by the ATB module - - - CRR 28825: xpradipg - 11 Feb 2005 - Description:Extension of GDI-for display of ISample and code cleanup - Solution: The code replication for D_Sample and E_sample are removed and a - new flag is added for the ISample. currently the BOARD ID is set to 70 for - CALLISTO and 71 for ISample. - -GW 31/01/03 - Added support for 16 bit LCD buffer - - Split DSAMPLE_COLOUR code into DSAMPLE_COLOUR32 (original 32bits/pixel) - and DSAMPLE_COLOUR16 (16 bits/pixel - untested) - Removed CSAMPLE_COLOUR option - Removed 'PLOT' option for D-sample - too slow to be useful - -*/ - -#ifndef DRV_DSPL_C -#define DRV_DSPL_C -#endif - -/*==== INCLUDES ===================================================*/ -#define ENTITY_CST - -#include -#if defined (WIN32) -#include -#endif - -#include "typedefs.h" -#include "gdi.h" -#include "dspl.h" -#include "font_bitmaps.h" -#include "vsi.h" -#include "custom.h" -#include "gsm.h" -#include "prim.h" -#include "p_mmi.h" -#include "tok.h" -#include "cst/cst.h" -#include "os.h" - -#include "rvf/rvf_api.h" - -#undef R2D_ENABLED -#ifndef _SIMULATION_ - -#if (defined(_TARGET_) && (BOARD!=10) && (BOARD!=34)&& (BOARD!=35)&& (BOARD!=46) && (BOARD !=70) && (BOARD != 71)) -/* - * R2D is not supported by EP2 module (BOARD == 10, of customer 6351/36) - * and by Avenger2/Perseus1 board (BOARD == 34). (dbachran / 2002-11-27) - * and by P2 board (BOARD == 35) and F-sample (BOARD == 46) (rsauer / 2004-05-27) - */ -#define R2D_ENABLED -#endif -#endif -#ifdef FF_MMI_NEW_LCD_API_MIG -#include "lcd_manager.h" -#endif -#ifndef _SIMULATION_ - #ifdef R2D_ENABLED - #include "r2d/r2d.h" - #include "r2d/r2d_config.h" - #endif -#endif -/* GW enable/disable trace using the MMI */ -/* NB. Traces are only for diagnostics while developing and must be removed for code deliveries!*/ -/* defining mmi_trace as will remove them */ -//#define MMI_TRACE -#define mmi_trace -//void mmi_trace(char* str); -/*==== EXPORT =====================================================*/ -#define ENCODE_OFFSET 24 -//define EASY_TEXT_ENABLED - -/************************************************************************ -* The following macros define what hardware we are running on and what * -* drivers are being used to drive the display * -* BSAMPLE - 84x48 display * -* CSAMPLE - 84x48 display * -* CSAMPLE_COLOUR - no longer supported * -* DSAMPLE - 176x220 display which can be driven as 16 bit colour or b+w * -* DSAMPLE_COLOUR - colour display * -* DSAMPLE_COLOUR16 - 16 bits per pixel displayed * -* NB. This has not been tested at all - it * -* may not display correctly or may crash * -* although it does not crash when enabled * -* with the 32bit drivers) * -* * -* DSAMPLE_COLOUR32 - 32 bits per pixel displayed (16 bits are * -* zero and have no effect) * -* DSAMPLE_LITE - 1 bit per pixel (b+w display) * -* GW SPR#1840 25/03/03 * -* Also, the compiler switches have been added to allow us to develop * -* the MMI for a different final format (b+w/smaller display). * -* COLOURDISPLAY - If not defined - all output is to be b+w * -* LSCREEN - If not defined - screen is 'small' - use the 8x6 font * -*************************************************************************/ -#if (defined(_TARGET_)) -//#if (BOARD==33) -#if ((BOARD == 8) || (BOARD == 9)) -#define CSAMPLE -#elif ((BOARD == 40) || (BOARD == 41)) -#define DSAMPLE -#elif (BOARD == 43) -#define ESAMPLE -//June 03, 2005 REF: GSM-ENH-31636 xpradipg -#elif (BOARD == 70) -#define CALLISTO -//CRR 28825: xpradipg - 11 Feb 2005 -#elif (BOARD == 71) // LCD enabling of ISAMPLE -#define ISAMPLE -#else -//Other board type -#define BSAMPLE -#endif -#else -//_TARGET_ not defined -//Not running on hardware - select the hw for simulation purposes. -#define BSAMPLE - -//Also, if not already disabled - disable trace code -#ifdef MMI_TRACE -#undef MMI_TRACE -#endif -#endif -//June 03, 2005 REF: GSM-ENH-31636 xpradipg -//CRR 28825: xpradipg - 11 Feb 2005 -#if (defined(DSAMPLE) || defined(ESAMPLE) || defined(ISAMPLE) || defined(CALLISTO)) - /* For a start, we use exactly the same definitions for E-Sample as we do - for D-Sample. IMPORTANT: If the E-Sample LCD differs from D-Sample, the - following lines must be properly adapted! - */ - #if (R2D_LCD_DISPLAY == R2D_COLOR) - #define DSAMPLE_COLOUR - #if (R2D_PIXEL_POS_TO_BIT_POS == 5) - #define DSAMPLE_COLOUR32 - #endif - #if (R2D_PIXEL_POS_TO_BIT_POS == 4) - #define DSAMPLE_COLOUR16 - #endif - #else - #define DSAMPLE_LITE - #undef COLOURDISPLAY - #endif -#endif /* ESAMPLE */ - -#ifdef FF_MMI_NEW_LCD_API_MIG - #define DSAMPLE_COLOUR - #if ( LCD_PIXEL_FORMAT == RGB565) - #define DSAMPLE_COLOUR16 - #endif -#endif -//Ensure that if the H/W does not support colour, the compiler option is overridden -//- we can display b+w only on a colour display but not the other way round -#ifndef DSAMPLE_COLOUR -#ifdef COLOURDISPLAY -#undef COLOURDISPLAY -#endif -#endif - - -/* -USE_PLOT - Defined if we are to use r2d_draw_point to output a display - This method will always produce a display (of sorts) but can be very slow -USE_BLIT_RECT - Defined if we provide a 24 bit colour display and allow the riviera code to - translate into the LCD format. -USE_BUFFER - This must be defined if USE_BLIT_RECT is being used. This will require an image - of the colour display to be stored in local memory. - -If neither are defined then we must create our buffer in the same format as the LCD. -NB if 'USE_BLIT_RECT' is not defined, any changes to the h/w or driver software will have an -impact on the code below. - -*/ - -/*==== CONSTANTS ==================================================*/ -// Mar 30, 2005 REF: CRR 29986 xpradipg -// removed the static qualifier to be accessed by the ATB module. -#ifdef FF_MMI_OPTIM -const int translation_ascii_2_unicode[256] = { -#else -static const int translation_ascii_2_unicode[256] = { -#endif - 0x0000, 0x00A4, 0x00d8, 0xFFFF, 0x0394, 0x03A8, 0x00BF, 0x00F8, 0xFFFF, 0xFFFF, 0x000A, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, - 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, - 0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026,0x0027, 0x0028, 0x0029, 0x002A, 0x002B, 0x002C, 0x002D, 0x002E, 0x002F, - 0x0030, 0x0031, 0x0032, 0x0033, 0x0034, 0x0035, 0x0036, 0x0037, 0x0038, 0x0039, 0x003A, 0x003B, 0x003C, 0x003D, 0x003E, 0x003F, - 0x0040,0x0041, 0x0042, 0x0043, 0x0044, 0x0045, 0x0046, 0x0047, 0x0048, 0x0049, 0x004A, 0x004B, 0x004C, 0x004D, 0x004E, 0x004F, - 0x0050, 0x0051, 0x0052, 0x0053, 0x0054, 0x0055, 0x0056, 0x0057, 0x0058, 0x0059, 0x005A, 0x005B, 0x005C, 0x005D, 0x005E, 0x005F, /* SPR#2034 - SH */ - 0xFFFF, 0x0061, 0x0062, 0x0063, 0x0064, 0x0065, 0x0066, 0x0067, 0x0068, 0x0069, 0x006A, 0x006B, 0x006C, 0x006D, 0x006E, 0x006F, - 0x0070, 0x0071, 0x0072, 0x0073, 0x0074, 0x0075, 0x0076, 0x0077, 0x0078, 0x0079, 0x007A, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, - - 0xFFFF, 0x00C7, 0x00FC, 0x00E9, 0x00E4, 0x00E0, 0x00E5, 0xFFFF, 0xFFFF, 0xFFFF, 0x00E8, 0xFFFF, 0xFFFF, 0x00EC, 0x00C4, 0x00C5, - 0x00C9, 0x00E6, 0x00C6, 0xFFFF, 0x00F6, 0x00F2, 0xFFFF, 0x00F9, 0xFFFF, 0x00D6, 0x00DC, 0xFFFF, 0x00A3, 0x00A5, 0xFFFF, 0xFFFF, - 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x00F1, 0x00D1, 0xFFFF, 0xFFFF, 0x00A7, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x00A1, 0xFFFF, 0xFFFF, - 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, - 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, - 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, - 0xFFFF, 0x00DF, 0x0393, 0x03A0, 0x03A3, 0xFFFF, 0xFFFF, 0xFFFF, 0x03A6, 0x0398, 0x03A9, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x039B, - 0x039E, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF - - }; -/*==== VARIABLES ==================================================*/ -//EXTERN UBYTE extDisplay; /* external display ? */ -EXTERN UBYTE extDisplay; /* external display ? */ -GLOBAL UBYTE dspl_char_type; - -/* - * We don't need display.c with ACI-only builds, but CST references extDisplay - * above, so we need to keep that one for now. - * Only process this file, if MMI is set to 1 (SMI) or 2 (BMI). - */ -#if (MMI != 0) - -GLOBAL dspl_DevCaps displayData; -#if defined (NEW_FRAME) -EXTERN T_HANDLE hCommL1; -#else -EXTERN T_VSI_CHANDLE hCommL1; -#endif - -static int scrEnabled = 0; /* screen update enable */ -static int txtInvert = 0; //Text invert - -static T_HANDLE mmi_handle; -static T_HANDLE hCommMMI = VSI_ERROR; - -/*==== FUNCTIONS ==================================================*/ -/* - * send to external Display - */ -LOCAL void dspl_SendDisplayReq (USHORT x, USHORT y, char *text); -GLOBAL void kbd_test (UBYTE key); - -/* - * TI driver functions - */ -extern void LCD_SetPower (void); -extern void LCD_Reset (void); -extern void LCD_Enable (int); -extern void LCD_Clear (void); -extern void LCD_WriteString (int y, int x, char *s); -extern void LCD_PixBlt (int x, int y, int w, int h, char *bmp); -extern void LCD_DrawIcon (int x, int y, char id); -extern void LCD_TranslateBitmap (int w, int h, char *bo, char *bt); -extern void LCD_Cursor (int row, int col); - -GLOBAL void rt_ExtPrimitive ( USHORT TaskHandle, USHORT DestComHandle, - char *ExtDest, OS_QDATA *Msg ); -/* - * Internal Functions for Graphic Driver (Workaround) - */ -LOCAL void scrInit (void); -LOCAL void scrExit (void); -LOCAL void scrSize (int *x, int *y); -#if (!CUST)//JVJE #if (CUST==1) - -LOCAL void scrClear (void); -#endif -LOCAL void scrClearRect (int px, int py, int sx, int sy); -LOCAL void scrText (int x, int y, char *txt); -LOCAL void scrText_Unicode (int x, int y, USHORT *txt); -LOCAL void scrLine (int px, int py, int sx, int sy); -LOCAL void scrRect (int px, int py, int sx, int sy); -LOCAL int scrFntSelect (int font); -LOCAL int scrFntHeight (void); -LOCAL int scrFntGetFit (char *tp, int lineWidth); -LOCAL int scrFntGetLen (char *tp, int nChars); -LOCAL int scrBmpDraw (int px, int py, int sx, int sy, - int ix, char *bm, int mode); -LOCAL void scrCurType (int type); -LOCAL void scrCursor (int x, int y); -//accessible from outside e.g 3th application MMS -void scrPoint (int px, int py, int col); -LOCAL int scrUpdate (int onOff); - -LOCAL void scrText_Invert_Unicode (int x, int y, USHORT *txt); /*kk*/ - -LOCAL int checkPixelColour(int px, int py, U32 col); -LOCAL void scrLCDUpdate (void); - -void scrText_Invert (int x, int y, char *txt); - -void scrDrawFilledRect (int px, int py, int sx, int sy, U32 col); - -int scrGetRealLength(char *str, int* totChar, int* totPixel); - -LOCAL void scrUnfocusDisplay(void); - - - - -void dspl_show_bitmap(int x, int y,t_font_bitmap* current_bitmap,U32 attr ); - - - - -GLOBAL UBYTE dspl_SetWindow(USHORT in_X1, - USHORT in_Y1, - USHORT in_X2, - USHORT in_Y2); - - - - - - - -/*==== CONSTANTS ==================================================*/ - -/******************************************************************* - * * - * PART I: Driver Interface * - * * - *******************************************************************/ - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_Init | -+--------------------------------------------------------------------+ - - PURPOSE : The function initializes the driver´s internal data. The - function returns DRV_INITIALIZED if the driver has already - been initialized and is ready to be used or already in use. - In case of an initialization failure, which means that the - driver cannot be used, the function returns DRV_INITFAILURE. - -*/ - -GLOBAL UBYTE dspl_Init (void) -{ - /* - * Default is character Display - */ - displayData.DisplayType = DSPL_TYPE_CHARACTER; - - if (!extDisplay) /* use internal display */ - { -#if defined (SIMULATE_LCD) - LCD_Reset (); /* use character oriented display */ - LCD_Enable (1); - LCD_Clear (); - scrInit(); /* we need this also for glob vars, kk 14.02.2000*/ -#else - scrInit(); /* use graphic display */ -#endif - } - else -#if defined (SIMULATE_LCD) - LCD_Enable (0); -#else - scrExit(); -#endif - - return DRV_OK; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_Exit | -+--------------------------------------------------------------------+ - - PURPOSE : The function is called when the driver functionality is - not longer needed. The function "de-allocates" all - allocated resources and finalizes the driver. - -*/ - -GLOBAL void dspl_Exit (void) -{ - scrExit(); -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_Clear | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to clear a specific region of the - display using the current background colour. The region - is specified by the upper left corner (X1, Y1) and the - lower right corner (X2, Y2) inclusive. The background - color can be set using dspl_SetBkgColor () function. - -*/ - -GLOBAL UBYTE dspl_Clear (USHORT in_X1, - USHORT in_Y1, - USHORT in_X2, - USHORT in_Y2) -{ - scrClearRect ((int)in_X1,(int)in_Y1,(int)(in_X2-in_X1+1),(int)(in_Y2-in_Y1+1)); - - return DRV_OK; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_Clear | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to clear a specific region of the - display using the current background colour. The region - is specified by the upper left corner (X1, Y1) and the - lower right corner (X2, Y2) inclusive. The background - color can be set using dspl_SetBkgColor () function. - -*/ - -GLOBAL UBYTE dspl_ClearAll (void) -{ -#if (!CUST) - scrClear (); -#endif - - return DRV_OK; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6147) MODULE : SMI_WM | -| STATE : code ROUTINE : dspl_UnfocusDisplay | -+--------------------------------------------------------------------+ - - PURPOSE : Calls the function that will cause the entire display to appear much - darker, allowing the pop-up dialog to be more clearly the focus - especially the softkeys. -GW #2294 23/07/03 - Created -*/ -GLOBAL UBYTE dspl_unfocusDisplay (void) -{ - scrUnfocusDisplay(); - return DRV_OK; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_Enable | -+--------------------------------------------------------------------+ - - PURPOSE : The function is used to turn the display on or off. While - a display is switched off, it is possible to perform any - drawing function. - -*/ - -GLOBAL UBYTE dspl_Enable (UBYTE in_Enable) -{ - return scrUpdate (in_Enable); -} - -/* -xreddymn Apr-07-2005 MMI-SPR-29655: Added function to update region -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_Enable_Region | -+--------------------------------------------------------------------+ - - PURPOSE : The function is used to update a region on the screen - -*/ - -void dspl_Enable_Region(INT16 x1, INT16 y1, INT16 x2, INT16 y2) -{ -#ifdef R2D_ENABLED - r2d_flush_region(x1, y1, x2, y2); -#endif -} - - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_GetDeviceCaps | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to retrieve the capabilities of the - display device including the dimensions of the display and - the logical unit in which the dimensions is measured. - -*/ - -GLOBAL void dspl_GetDeviceCaps (dspl_DevCaps * out_DeviceCapsPtr) -{ - int x,y; - - scrSize (&x, &y); - - out_DeviceCapsPtr->Height = (USHORT)y; - out_DeviceCapsPtr->Width = (USHORT)x; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_SetDeviceCaps | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to set the capabilities of the - display device including the dimensions of the display and - the logical unit in which the dimensions is measured. - -*/ - -GLOBAL void dspl_SetDeviceCaps (dspl_DevCaps * in_DeviceCapsPtr) -{ - displayData.DisplayType = in_DeviceCapsPtr->DisplayType; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_GetIconImage | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to copy the image of a driver - internal icon into an application specific icon buffer. - The icon may modify the icon. In case of a successful - completion the function returns DRV_OK. In case the - size of the buffer where the icon image shall be copied - is too small the driver returns DRV_INVALID_PARAMS. In - case a specific driver implementation does not support - this functionality the driver returns DSPL_FCT_NOTSUPPORTED. - -*/ - -GLOBAL UBYTE dspl_GetIconImage (UBYTE in_Icon, - USHORT in_Size, - UBYTE * out_IconImagePtr) -{ - return DSPL_FCT_NOTSUPPORTED; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_SetCursor | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to change the current cursor settings. - These settings include the type of cursor and the mode - (e.g. static cursor, not flashing). A set of standard - types and modes is defined. - -*/ - -GLOBAL UBYTE dspl_SetCursor (UBYTE in_CursorType, - UBYTE in_CursorMode) -{ - return DRV_OK; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_SetCursorPos | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to set the current cursor position. - If the function succeeds, the cursor is set to the new - position. If one of the values is out of range, the function - returns DRV_INVALID_PARAMS. The number of rows and columns - the display supports can be retrieved using the function - dspl_GetDevCaps(). The upper left corner has the coordinates - 0,0. The values in_X and in_Y are measured in logical units - depending on the capabilities of the device. The means a - graphical display will use pixels. - -GW 05/09/01 Added size x and size y parameters to allow for chinese chars. -*/ - -GLOBAL UBYTE dspl_SetCursorPos (USHORT in_X, - USHORT in_Y, - USHORT in_SizeX, - USHORT in_SizeY - ) -{ - if (displayData.DisplayType EQ DSPL_TYPE_CHARACTER) - { - LCD_Cursor (in_Y, in_X); /* set cursor position */ - if (extDisplay) /* if external display */ - dspl_SendDisplayReq (in_X, in_Y, NULL); - } - else - scrLine(in_X,in_Y+in_SizeY-1,in_X+in_SizeX-1,in_Y+in_SizeY-1); - return DRV_OK; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_ShowCursor | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to change the status of the cursor. - The cursor can be visible or invisible. The function returns - the previous status of the cursor. - -*/ - -GLOBAL UBYTE dspl_ShowCursor (UBYTE in_Show) -{ - return DSPL_CURSOR_VISIBLE; -} - - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_SetBkgColor | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to change the color used for - background painting. If the color is out of range, the - driver returns DRV_INVALID_PARAMS and leaves the color - unchanged. - -*/ - -GLOBAL UBYTE dspl_SetBkgColor (UBYTE in_Color) -{ - return DRV_OK; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_SetFrgColor | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to change the color used for - foreground painting, e.g. text color. If the color is - out of range, the driver returns DRV_INVALID_PARAMS and - leaves the color unchanged. - set a call-back function which - -*/ - -GLOBAL UBYTE dspl_SetFrgColor (UBYTE in_Color) -{ - return DSPL_FCT_NOTSUPPORTED; -} - -enum -{ - COL_TYPE_FGD =0, - COL_TYPE_BGD, - COL_TYPE_HIGHLIGHT, - COL_TYPE_BORDER, - COL_TYPE_SHADOW, - MAX_COL_TYPE -}; -enum -{ - COL_CMD_INIT, - COL_CMD_GET, - COL_CMD_SET, - COL_CMD_SETSHADOW, - COL_CMD_RESTORECOL, - MAX_COL_CMD -}; - -//This definition allows us to have a transparent colour in 256 colour bitmaps. -//We lose the colour nearly-black gray but I don't think it will be missed! -//Better to lose white than gray but will require all icons to be updated! -#define TRANSPARENT_256_COL 0x25 - -//This definition allows us to have a transparent colour in 16bit LCD colour bitmaps. -//We lose almost white R=0xF8 G=0xFC B=0xF8. NB word is inverted -#define TRANSPARENT_16BIT_COL 0x0020 - -//using ARGB format, transparent = 0xFFxxxxxx -#define TRANSPARENT_32BIT_COLOUR 0xFF000000 - -//Hide colours -LOCAL U32 colour_class (int cmd, int colId, U32 inColour) -{ -static U32 g_col[MAX_COL_TYPE]; -static U32 g_colOld[MAX_COL_TYPE]; - switch (cmd) - { - case COL_CMD_INIT: - colour_class(COL_CMD_SET, COL_TYPE_FGD, 0x00404040 ); - colour_class(COL_CMD_SET, COL_TYPE_BGD, 0x00FFFFFF ); //white - colour_class(COL_CMD_SET, COL_TYPE_HIGHLIGHT, 0x00FF00FF ); - colour_class(COL_CMD_SET, COL_TYPE_BORDER, 0x00FFFFFF ); - colour_class(COL_CMD_SET, COL_TYPE_SHADOW, 0x40010101 ); //50% translucency - return (0); - break; - case COL_CMD_SET: - if (inColour != 0) - { - g_colOld[colId] = g_col[colId]; - g_col[colId] = inColour; - } - return(g_colOld[colId]); - break; - case COL_CMD_GET: -#ifdef COLOURDISPLAY -#ifdef DSAMPLE_COLOUR - return(g_col[colId]); -#endif -#else - switch (colId) - { - case COL_TYPE_FGD: return (0x00FFFFFF); - case COL_TYPE_BGD: return (0x00000000); - case COL_TYPE_HIGHLIGHT: return (0x00000000); - case COL_TYPE_BORDER: return (0x00000000); - case COL_TYPE_SHADOW: return (0x00000000); - default: return (0); - } -#endif - break; - case COL_CMD_SETSHADOW: - g_colOld[colId] = g_col[colId];//currently we dont really need to save the old value - // set shadow to 50% black - g_col[colId] = 0x40010101;// | ((inColour >> 2) & 0x003F3F3F); - return(0x40010101); - break; - case COL_CMD_RESTORECOL: - g_col[colId] = g_colOld[colId]; - return (0); - break; - default: - break; - } - return (0); -} - -GLOBAL U32 dspl_SetFgdColour (U32 inColour) { return (colour_class(COL_CMD_SET, COL_TYPE_FGD, inColour)); } -GLOBAL U32 dspl_SetBgdColour (U32 inColour) { return (colour_class(COL_CMD_SET, COL_TYPE_BGD, inColour)); } -GLOBAL U32 dspl_SetHighlightColour (U32 inColour) { return (colour_class(COL_CMD_SET, COL_TYPE_HIGHLIGHT, inColour)); } -GLOBAL U32 dspl_SetBorderColour (U32 inColour) { return (colour_class(COL_CMD_SET, COL_TYPE_BORDER, inColour)); } -GLOBAL U32 dspl_SetShadowColour (U32 inColour) { return (colour_class(COL_CMD_SETSHADOW, COL_TYPE_SHADOW, inColour)); } - -GLOBAL U32 dspl_GetFgdColour ( void ) { return (colour_class(COL_CMD_GET, COL_TYPE_FGD, 0)); } -GLOBAL U32 dspl_GetBgdColour ( void ) { return (colour_class(COL_CMD_GET, COL_TYPE_BGD, 0)); } -GLOBAL U32 dspl_GetHighlightColour ( void ) { return (colour_class(COL_CMD_GET, COL_TYPE_HIGHLIGHT, 0)); } -GLOBAL U32 dspl_GetBorderColour ( void ) { return (colour_class(COL_CMD_GET, COL_TYPE_BORDER, 0)); } -GLOBAL U32 dspl_GetShadowColour (void) { return (colour_class(COL_CMD_GET, COL_TYPE_SHADOW, 0)); } - -GLOBAL void dspl_InitColour (void) -{ - colour_class(COL_CMD_INIT, 0, 0); -} -GLOBAL void dspl_RestoreColour (void) -{ - colour_class(COL_CMD_RESTORECOL, COL_TYPE_FGD, 0); - colour_class(COL_CMD_RESTORECOL, COL_TYPE_BGD, 0); -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_DrawIcon | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to draw a driver internal icon. - The origin of the icon is the upper left corner, defined - by the parameters in_X/in_Y. - -*/ - -GLOBAL UBYTE dspl_DrawIcon (UBYTE in_IconID, - USHORT in_X, - USHORT in_Y) -{ - return DSPL_FCT_NOTSUPPORTED; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_DrawLine | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to draw a line from a specific - location defined by the parameters in_X1/in_Y1, to a - specific location defined by the parameters in_X2/in_Y2. - The display´s origin is the upper left corner with the - co-ordinates (0,0). The function uses the current - foreground color, which can be set using the - dspl_SetFrgColor (), to draw the line. - -*/ - -GLOBAL UBYTE dspl_DrawLine (USHORT in_X1, - USHORT in_Y1, - USHORT in_X2, - USHORT in_Y2) -{ - scrLine(in_X1,in_Y1,in_X2,in_Y2); - - return DRV_OK; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_DrawRect | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to draw a rectangle. The upper left - corner of the rectangle is defined by the parameters - in_X1/in_Y1. The lower right corner of the rectangle is - defined by the parameters in_X2/in_Y2. - The display´s origin is the upper left corner with the - co-ordinates (0,0). The function uses the current - foreground color, which can be set using the - dspl_SetFrgColor (), to draw the rectangle. - -*/ - -GLOBAL UBYTE dspl_roundRectFill (int px, - int py, - int sx, - int sy, - int border) -{ - int i,j,col; - col = dspl_GetBgdColour(); - scrDrawFilledRect(px-border,py, sx+border*2,sy, col ); - scrDrawFilledRect(px,py-border, sx,sy+border*2, col ); - - for (i=0;i> 3); //bitmaps are unpacked - bmpPtr = &bmpPtr[bmpSize*in_index]; //for bitmaps that have multiple states - - } - current_bitmap.height = in_Height; - current_bitmap.width = in_Width; - current_bitmap.bitmapSize = 0;// bmpSize; - current_bitmap.bitmap = bmpPtr; - current_bitmap.format = bmpFormat; - dspl_show_bitmap(in_X,in_Y, ¤t_bitmap, attr); - - return DRV_OK; - -} - -GLOBAL UBYTE dspl_BitBlt (USHORT in_X, - USHORT in_Y, - USHORT in_Width, - USHORT in_Height, - USHORT in_Index, - void * in_BmpPtr, - USHORT in_Rop) -{ -#ifdef BSAMPLE -//Use old procedure - scrBmpDraw ((int)in_X, (int) in_Y, (int) in_Width, - (int)in_Height, (int)in_Index, - (char *)in_BmpPtr, (int)in_Rop); - return DRV_OK; -#else - return (dspl_BitBlt2( (short) in_X, (short) in_Y, in_Width, in_Height, in_BmpPtr, in_Index, BMP_FORMAT_BW_UNPACKED)); -#endif - -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_SelectFontbyID | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to select a font used for - displaying text. Text can be displayed using the - functions dspl_TextOut_Cmode. - Driver specific fonts are identified be a font ID - (parameter in_Font). The definition of fonts and font - identifiers is not in scope of G23. Fonts and font - identifiers have to be defined by the customer. The - specific implementation of the display driver and the MMI - using the driver have the knowledge about the available - fonts, their identification and how to use them. - -*/ - -GLOBAL UBYTE dspl_SelectFontbyID (UBYTE in_Font) -{ - return DSPL_FCT_NOTSUPPORTED; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_SelectFontbyImage | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to select a font used for - displaying text. Text can be displayed using the - functions dspl_TextOut_Cmode. - Application specific fonts are identified by the parameter - in_FontPtr, the address of the buffer containing the - application specific font. The structure of the font image - in not in the scope of G23. The structure of the font images - have to be defined by the customer implementing the driver. - -*/ - -GLOBAL UBYTE dspl_SelectFontbyImage (UBYTE * in_FontPtr) -{ - return DSPL_FCT_NOTSUPPORTED; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_GetFontImage | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to copy the image of a font into an - application specific font buffer. The application may modify - the font. In case of a successful completion the function - returns DRV_OK. In case the size of the buffer where the - font image shall be copied to is too small the driver returns - DRV_INVALID_PARAMS. In case a specific driver implementation - does not support this functionality the driver returns - DSPL_FCT_NOTSUPPORTED. - -*/ - -GLOBAL UBYTE dspl_GetFontImage (UBYTE in_Font, - USHORT in_Size, - UBYTE * out_FontPtr) -{ - return DSPL_FCT_NOTSUPPORTED; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_GetFontHeight | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to retrieve the vertical size of - the currently selected font. The function returns the - height measured in logical units depending on the device - capabilities (e.g. pixels or multiple of characters). Call - the function dspl_SelectFont() to select a font. - -*/ - -GLOBAL UBYTE dspl_GetFontHeight (void) -{ - return scrFntHeight(); -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_GetTextExtent | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to calculate the size of a 0-terminated - string, to which the parameter in_Text points. The function - returns the size needed to display the text. The value of - the size is measured in units depending on the device - capabilities (e.g. pixels or multiple of characters). Call - the function dspl_SelectFont() to select a font. - -*/ - -GLOBAL USHORT dspl_GetTextExtent_old (char * in_Text, USHORT in_Length) -{ - if (displayData.DisplayType EQ DSPL_TYPE_CHARACTER) - return in_Length; - else - return scrFntGetLen ( in_Text, ( int ) in_Length ); -} - - -GLOBAL USHORT dspl_GetTextExtent (char * in_Text, USHORT in_Length) -{ - int nPixel=0; - int nChar = in_Length; - if (in_Text==NULL) - return(0); - - if (displayData.DisplayType EQ DSPL_TYPE_CHARACTER ) - { - return in_Length; - } - scrGetRealLength(in_Text, &nChar, &nPixel); - - return (nPixel); -} - - - - - -int dspl_GetTextExtent2 (char * in_Text, USHORT in_Length) -{ - return (dspl_GetTextExtent ( in_Text, in_Length)); - -} -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_GetNcharToFit | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to calculate the number of characters of the input - string that will fit into the specified width. - -*/ -/*SPR 1541, added function*/ -//Calculate number of chars that fit in the available space. -GLOBAL USHORT dspl_GetNcharToFit (char * in_Text, USHORT pixelWidth) -{ - int nPixel=pixelWidth; - int nChar= 0; - if (in_Text==NULL) - return(0); - - scrGetRealLength(in_Text, &nChar, &nPixel); - - return (nChar); -} -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_GetMaxTextLen | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to calculate the sub-string - (number of characters) of a 0-terminated string (in_Text) - that can be displayed in the region given by the parameter - in_HSize. The value of in_HSize is measured in logical - units (e.g. pixels or multiple of characters). Call - the function dspl_SelectFont() to select a font. - -*/ - -GLOBAL USHORT dspl_GetMaxTextLen (char * in_Text, - USHORT in_HSize) -{ - if (displayData.DisplayType EQ DSPL_TYPE_CHARACTER) - return strlen (in_Text); - else - return scrFntGetFit ( in_Text, ( int ) in_HSize ); -} - - - - -GLOBAL void dspl_set_char_type(UBYTE char_type){ - dspl_char_type = char_type; -} - -GLOBAL UBYTE dspl_get_char_type(void){ - return dspl_char_type; -} - -int dspl_getDisplayType( void ) -{ -// Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg -#if defined(FF_MMI_NEW_LCD_API_MIG) && ( defined(ISAMPLE) || defined (CALLISTO)) - return DSPL_COLOUR; -#endif -#ifndef COLOURDISPLAY - return (DSPL_BW); -#endif - -#ifdef R2D_ENABLED - if (R2D_LCD_DISPLAY == R2D_COLOR) - return (DSPL_COLOUR); - else -#endif - return (DSPL_BW); -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_TextOut_Cmode | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to display a text at the given - location in_X/in_Y uding the defined attributes (in_Attrib) - and the currently selected color (foreground and background). - The cursor position is left unchanged. The driver will not - take the displays bounding rectangle into consideration and - therefore text may be cut off. - Linefeeds and carriage returns are not supported and there- - fore must be handled by upper layers. - -GW 14/02/03 - SPR#1736 Modified code to call 'dspl_ScrText' to allow a border to be drawn - round chinese characters. - -*/ - - -GLOBAL UBYTE dspl_TextOut_Cmode (USHORT in_X, - USHORT in_Y, - UBYTE in_Attrib, - char * in_Text) -{ - int in_X_signed; - int in_Y_signed; - int txtStyle=0; - // SH - If we want signed coordinates (i.e. if x and y can have negative numbers) - // we need to convert the unsigned values into two's complement. - - if (in_Attrib & DSPL_TXTATTR_SIGNED_COORDS) - { - in_X_signed = (SHORT)in_X; - in_Y_signed = (SHORT)in_Y; - } - else - { - in_X_signed = in_X; - in_Y_signed = in_Y; - } - -#if defined (WIN32) - if (scrEnabled) - { - if (in_Attrib & DSPL_TXTATTR_INVERS) - { - scrText_Invert(in_X, in_Y, in_Text); - } - else - { - scrText(in_X, in_Y, in_Text); - } - } - else - LCD_WriteString (in_Y, in_X, (UBYTE *) in_Text); -#else - if (displayData.DisplayType EQ DSPL_TYPE_CHARACTER) - { - if (in_Attrib & DSPL_TXTATTR_INVERS) - { - if (dspl_char_type == DSPL_TYPE_ASCII) - scrText_Invert(6 * in_X + 2, 8 * in_Y, in_Text); - else - scrText_Invert_Unicode(12 * in_X + 2, 12 * in_Y,(USHORT*) in_Text); - } - else - { - if (dspl_char_type == DSPL_TYPE_ASCII) - scrText(6 * in_X_signed + 2, 8 * in_Y_signed, in_Text); - else - scrText_Unicode(12 * in_X_signed + 2, 12 * in_Y_signed, (USHORT*)in_Text); - } - } - else - { - txtStyle = 0; - if (in_Attrib & DSPL_TXTATTR_INVERS) - txtStyle = TXT_STYLE_INVERT; - else - txtStyle = TXT_STYLE_NORMAL; - if (dspl_char_type != DSPL_TYPE_ASCII) - txtStyle = txtStyle | TXT_STYLE_UNICODE; - dspl_ScrText( in_X_signed,in_Y_signed,in_Text, txtStyle); -// scrText_Unicode(in_X_signed,in_Y_signed, (USHORT*)in_Text); - - } -#endif - /* - * if an external display simulation is used and switched on with the - * EXT_DISPLAY config primitive - send a MMI_DISPLAY_REQ primitive. - */ - if (extDisplay) - dspl_SendDisplayReq (in_X, in_Y, in_Text); - - return DRV_OK; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_TextOut | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to display a text at the given - location in_X/in_Y using the defined attributes (in_Attrib) - It calls dspl_ScrText to actually display the text - -GW 14/02/03 - SPR#1736 Modified code to call 'dspl_ScrText' to allow a border to be drawn - round chinese characters. -*/ - -GLOBAL UBYTE dspl_TextOut(USHORT in_X, - USHORT in_Y, - UBYTE in_Attrib, - char * in_Text) -{ - UBYTE temp; - int in_X_signed; - int in_Y_signed; - int txtStyle=0; - char* op_str; - - /*MC SPR 1319*/ - if (in_Text == NULL) - return DRV_OK; - /*MC end*/ - - op_str = in_Text; - -#if defined (WIN32) - if (!scrEnabled) - { - LCD_WriteString (in_Y, in_X, (UBYTE *) in_Text); - } - else -#endif - { - - if (in_Attrib & DSPL_TXTATTR_SIGNED_COORDS) - { - in_X_signed = (SHORT)in_X; - in_Y_signed = (SHORT)in_Y; - } - else - { - in_X_signed = in_X; - in_Y_signed = in_Y; - } - - /*Mc SPR 1526, we no longer check for current mode*/ - if (in_Attrib & DSPL_TXTATTR_INVERS) - txtStyle = TXT_STYLE_INVERT; - else - txtStyle = TXT_STYLE_NORMAL; - - - if ((in_Attrib&DSPL_TXTATTR_UNICODE) || (in_Text[0] ==0x80)) - { - txtStyle = txtStyle | TXT_STYLE_UNICODE; - if (op_str[0] ==0x80)//if unicode tag at beginning of string - op_str = &op_str[2]; - } - if (displayData.DisplayType EQ DSPL_TYPE_CHARACTER) - { - /* the following is only accurate for a fixed-width font*/ - if (txtStyle & TXT_STYLE_UNICODE) - { - in_X_signed = in_X_signed*12+2; - in_Y_signed = in_Y_signed*12; - } - else - { - in_X_signed = in_X_signed*6+2; - in_Y_signed = in_Y_signed*8; - } - } - - dspl_ScrText( in_X_signed,in_Y_signed,op_str, txtStyle); - } - /* - * if an external display simulation is used and switched on with the - * EXT_DISPLAY config primitive - send a MMI_DISPLAY_REQ primitive. - */ - if (extDisplay) - dspl_SendDisplayReq (in_X, in_Y, in_Text); - - return DRV_OK; -} -/**/ - - - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_SetWorkShadow | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to define the address of the - shadow RAM for drawing operations. - -*/ - -GLOBAL UBYTE dspl_SetWorkShadow (UBYTE * in_ShadowPtr) -{ - return DSPL_FCT_NOTSUPPORTED; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_SetDisplayShadow | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to define the address of the - shadow RAM for displaying operations. - -*/ - -GLOBAL UBYTE dspl_SetDisplayShadow (UBYTE * in_ShadowPtr) -{ - return DSPL_FCT_NOTSUPPORTED; -} - - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6147) MODULE : SMI_WM | -| STATE : code ROUTINE : dspl_SendDisplayReq | -+--------------------------------------------------------------------+ - - PURPOSE : sends an MMI_DISPLAY_REQ primitive to write - the text at position X,Y to PL. If the parameter - text is NULL only the cursor position - should change. If in this case the X and Y value - is 0xffff the cursor will be hide. - -*/ -LOCAL void dspl_SendDisplayReq (USHORT x, USHORT y, char *text) -{ -#ifdef NEW_FRAME -T_QMSG Msg; -T_VOID_STRUCT *prim; -#endif - - USHORT sdu_len = (text NEQ NULL) ? strlen (text) : 0; - PALLOC_SDU (mmi_display_req, MMI_DISPLAY_REQ, (USHORT)(sdu_len<<3)); - - mmi_display_req->c_x = x; - mmi_display_req->c_y = y; - - if (text NEQ NULL) - { - /* - * text output - */ - mmi_display_req->attrib.content = CON_TEXT; - mmi_display_req->attrib.control = CTL_NORMAL; - mmi_display_req->sdu.o_buf = 0; - mmi_display_req->sdu.l_buf = (sdu_len<<3); - memcpy (mmi_display_req->sdu.buf, text, sdu_len); - } - else - { - /* - * change the cursor position - */ - mmi_display_req->attrib.content = CON_CURSOR; - mmi_display_req->attrib.control = ((x EQ 0xffff) ? CTL_HIDDEN : CTL_NORMAL); - mmi_display_req->sdu.o_buf = 0; - mmi_display_req->sdu.l_buf = 0; - } - -#if defined NEW_FRAME - if ( hCommMMI == VSI_ERROR ) - { - mmi_handle = vsi_e_handle ( 0, "MMI" ); - hCommMMI = vsi_c_open ( 0, "MMI" ); - prim = vsi_c_pnew ( 100, 0x8000 FILE_LINE_MACRO ); - strcpy ((char*)prim, "REDIRECT MMI 0000111000001010 PAN"); - vsi_c_primitive ( mmi_handle, D2P(prim) ); - } - PSEND(hCommMMI,mmi_display_req); - -#else - ext_primitive (D2P(mmi_display_req), "CST", "PAN", - sizeof (T_PRIM_HEADER) + - sizeof (T_MMI_DISPLAY_REQ) + - sdu_len); - PFREE (mmi_display_req); -#endif -} - -GLOBAL UBYTE dspl_DrawWin (USHORT px, USHORT py, USHORT sx, USHORT sy, int format, t_font_bitmap *bgdBmp) -{ - USHORT x1,y1,x2,y2; - int xOfs,yOfs; - - if (bgdBmp == NULL) - { - scrDrawFilledRect( px+3,py+3, sx, sy, 0x00010101 ); //shadow - scrDrawFilledRect( px,py, sx, sy, dspl_GetBgdColour() ); - - scrRect( px-1,py-1, sx+1, sy+1); - } - else - { - xOfs = (sx-bgdBmp->width)/2; - yOfs = (sy-bgdBmp->height)/2; - - dspl_GetWindow(&x1,&y1,&x2,&y2 ); - - switch (format) - { - case DSPL_WIN_NORMAL: - dspl_show_bitmap(px, py, bgdBmp, SHOWBITMAP_NORMAL ); - break; - case DSPL_WIN_CENTRE: - dspl_show_bitmap(px+xOfs, py+yOfs, bgdBmp, SHOWBITMAP_NORMAL ); - break; - case DSPL_WIN_CLIP: - dspl_SetWindow(px,py,px+sx,px+sy ); - dspl_show_bitmap(px, py, bgdBmp, SHOWBITMAP_NORMAL ); - break; - case DSPL_WIN_CENTRE_CLIP: - dspl_SetWindow(px,py,px+sx,px+sy ); - dspl_show_bitmap(px+xOfs, py+yOfs, bgdBmp, SHOWBITMAP_NORMAL ); - break; - case DSPL_WIN_TILE: - dspl_SetWindow(px,py,px+sx,px+sy ); - yOfs=0; - while(yOfs < sy) - { - xOfs=0; - while (xOfs < sx) - { - dspl_show_bitmap(px+xOfs, py+yOfs, bgdBmp, SHOWBITMAP_NORMAL ); - xOfs=xOfs+bgdBmp->width; - } - yOfs=yOfs+bgdBmp->height; - } - break; - } - dspl_SetWindow(x1,y1,x2,y2 ); - } - -/* switch (format) - { - case 0: - default: - break; - }*/ - return DRV_OK; -} -static int win_x1, win_x2, win_y1, win_y2; - -//Set-up area to be drawn in - limit window to the size of the screen -//Inputs in_x1/y1 - first column/row that can be drawn on -// in_x2/y2 - last column/row -//NB:- inputs are the same as used to clear/draw rectangles BUT -// values stored in win_x2/y2 are +1 to ensure values are treated the same as scrX/Y -GLOBAL UBYTE dspl_SetWindow(USHORT in_X1, - USHORT in_Y1, - USHORT in_X2, - USHORT in_Y2) -{ -int sizeX,sizeY; - - scrSize (&sizeX, &sizeY); - if (in_X1>0) - win_x1 = in_X1; - else - win_x1 = 0; - if (in_Y1>0) - win_y1 = in_Y1; - else - win_y1 = 0; - if (in_X2=0) && ((j)=0) && ((word)=0) && ((j)> 8) | (((col32) &0x0000FC00) >> 5) | (((col32) &0x000000F8) >> 3)))) -#define DSPL_GET_PIXELCOLOUR(col32) (((((col32)<<8) &0x00F80000) | (((col32)<<5) &0x0000FC00) | (((col32)<<3) &0x000000F8))) -#endif - -#ifdef DSAMPLE_COLOUR16 -// July 1, 2005 REF: CRR 32677 - xpradipg -// the extra word padding is not required for the ISAMPLE AND CALLISTO -#if (defined(ISAMPLE) || defined(CALLISTO)) -#define LCD_ROW_NUM_LWORDS ((LCD_COL)/2) /* col size in longwords */ -#else -#define LCD_ROW_NUM_LWORDS ((LCD_COL+1)/2) /* col size in longwords */ -#endif -#define BYTEPERPIXEL 2 -#ifdef PIXEL_0_IN_LSW -#ifdef CHECK_LIMITS -#define DSPL_SET_BITCOLOUR(x,j,col,txt) \ -{\ -if (((j)>=0) && ((j)=0) && ((j)> 8) | (((col32) &0x0000FC00) >> 5) | (((col32) &0x000000F8) >> 3))) -#else -#define DSPL_GET_BITCOLOUR(col32) (~(((((col32) &0x00F80000) >> 8) | (((col32) &0x0000FC00) >> 5) | (((col32) &0x000000F8) >> 3)))) -#endif -#define DSPL_GET_PIXELCOLOUR(col32) (((((col32)<<8) &0x00F80000) | (((col32)<<5) &0x0000FC00) | (((col32)<<3) &0x000000F8))) -#endif - -// 3 words of header info for 'pictures' -#ifdef DSAMPLE_LITE -static UINT32* picture_bw = NULL;//Pointer to data in display. -static UINT32* pictureCopy_bw= NULL;//Pointer to data in display. -#endif//DSAMPLE_LITE - -#ifdef DSAMPLE_COLOUR -static UINT32* picture_col = NULL;//Pointer to data in display. -// Mar 30, 2005 REF: CRR 29986 xpradipg -// removed the unused variable -#ifndef FF_MMI_OPTIM -static UINT32* pictureCopy_col= NULL;//Pointer to data in display. -#endif -#endif - -#ifdef CSAMPLE -#define HEADER_INFO (3) -#define DISPLAY_SIZE (LCD_COL*LCD_COL_NUM_LWORDS) -static UINT32 display_bw [DISPLAY_SIZE+HEADER_INFO+10]; -#ifdef USE_PLOT -static UINT32 displayCopy_bw [DISPLAY_SIZE+HEADER_INFO+1]; /* copy to flag differences */ -#endif -static UINT32* picture_bw=NULL;//Pointer to data in display. -static UINT32* pictureCopy_bw= NULL;//Pointer to data in display. -/* static char scratch [100]; */ /* command buffer - does not support output of new display */ -#endif //CSAMPLE - -#ifdef BSAMPLE -static UBYTE displayScr [LCD_ROW][LCD_COL_B]; /* display buffer */ -static UBYTE displayCopy [LCD_ROW][LCD_COL_B]; /* copy to flag differences */ -/* static char scratch [LCD_ROW*LCD_COL_B*2+100]; */ /* command buffer */ -#endif //BSAMPLE - - -//Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg -//the frame buffer will be defined in the MMI, this has to be put under the -//section DMA in the memory - need to find out how it is done -#if defined(ISAMPLE ) || defined(CALLISTO) -#ifdef FF_MMI_NEW_LCD_API_MIG -#pragma DATA_SECTION(lcd_frame_buffer, ".r2dbuffer") -UINT32 lcd_frame_buffer [LCD_ROW*LCD_ROW_NUM_LWORDS]; -#endif -#endif - - -static int mobEnabled = 1; /* mobile simulation disabled */ - -extern int mfwExtOut (char *cmd); /* forward to ext. display */ -UBYTE lcd_output_ready = TRUE; -UBYTE lcd_output_needed = FALSE; - -#define scrHlen 18 -static const char *scrHeader = "CONFIG MFWMOB SCR "; - -static int scrX, scrY; /* display size */ -#if defined (WIN32) -static int mtkEnabled = 0; /* MMI Toolkit */ -#endif - -static int internal = 0; /* internal use only */ - -static int xIndex; /* data transfer index */ - -//accessible from outside e.g 3th application MMS -void scrPoint (int px, int py, int col); -#if (BOARD == 70) || (BOARD == 71) -U8* get_LCD_bitmap(void) -{ - return NULL; -} - -U32 get_screen_size(void) -{ - return 0; -} - - -void get_screen_capture(U8 *dest_data) -{ - -} - -#else - - -//xrashmic 22 Aug, 2004 MMI-SPR-32798 -#ifdef DSAMPLE_COLOUR16 -#define SC_BITMAP_SIZE ( ((R2D_WIDTH + 7) / 8) * R2D_HEIGHT + 2 * sizeof(U16)) -#endif -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : get_LCD_bitmap | -+--------------------------------------------------------------------+ - - PURPOSE : Return the frame buffer - xrashmic 22 Aug, 2004 MMI-SPR-32798 - Implemented by xreddymn -*/ - -U8* get_LCD_bitmap(void) -{ -#ifdef DSAMPLE_COLOUR16 - return((U8*)picture_col); -#else - return NULL; -#endif -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : get_screen_size | -+--------------------------------------------------------------------+ - - PURPOSE : Return the size of the bitmap to hold the screen shot - xrashmic 22 Aug, 2004 MMI-SPR-32798 - Implemented by xreddymn -*/ -U32 get_screen_size(void) -{ -#ifdef DSAMPLE_COLOUR16 - return SC_BITMAP_SIZE; -#else - return 0; -#endif -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : get_screen_capture | -+--------------------------------------------------------------------+ - - PURPOSE : Dumps the frame buffer data(16bit) into a monochrome data - xrashmic 22 Aug, 2004 MMI-SPR-32798 - Implemented by xreddymn -*/ - -void get_screen_capture(U8 *dest_data) -{ -#ifdef DSAMPLE_COLOUR16 - U8 *source_data; - U32 source_offset=0; - U32 dest_offset=4; - S32 i,j; - U16 pixel_RGB16; - U8 R, G, B; - S32 avg; - U8 color=0; - - /* First two fields (u16) are width and height */ - dest_data[0]=((R2D_WIDTH) & 0xFF); - dest_data[1]=((R2D_WIDTH) & 0xFF00)>>8; - dest_data[2]=((R2D_HEIGHT) & 0xFF); - dest_data[3]=((R2D_HEIGHT) & 0xFF00)>>8; - source_data=get_LCD_bitmap(); - for(j=0;j>11)<<3)|0x07; - G=(((pixel_RGB16>>5)&0x3f)<<2)|0x03; - B=((pixel_RGB16&0x1f)<<3)|0x07; - avg=R+G+B; - avg/=3; - if(avg<0x80) color=0; - else color=1; - dest_data[dest_offset-1]|=(color<<(i%8)); - } - source_offset+=4; /* Add framebuffer padding bytes here */ - } -#endif -} -#endif -/* -+--------------------------------------------------------------------+ -| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | -| STATE : code ROUTINE : dspl_BitBlt | -+--------------------------------------------------------------------+ - - PURPOSE : This function is used to display a bitmap at the - specified location using the raster operation provided. - The bitmap format MUST be the same as the display and - cannot contain any transparent colours - If the bitmap does not cover the entire screen area, the rest of the - area is drawn in the background colour provided. - -*/ -#ifdef DSAMPLE_COLOUR -void fastCopyBitmap(int startX, int startY, // start position of bitmap - int bmpSx, int bmpSy, //size of bitmap - char* srcBitmap, - int posX, int posY, // start of area to be copied into - int sx, int sy, // size of area to be copied into - U32 bgd_col, int bmpFormat) -{ - char * image; - int image_sx,image_x; - int bgd_sx_left; - int bgd_sx_right; - int i,y; - char *screen = (char*)picture_col; - U32 bgdColour; - - if (posX < win_x1) - { - sx = sx - (win_x1-posX); - posX = win_x1; - } - if (posX+sx >win_x2) - { - sx = win_x2 - posX; - } - if (posY < win_y1) - { - sy = sy - (win_y1-posY); - posY = win_y1; - } - if (posY+sy >win_y2) - { - sy = win_y2 - posY; - } -{ - char trc[80]; - sprintf(trc,"%d,%d,%d,%d,%d,%d",sx,sy,win_x1,win_y1,win_x2,win_y2); - mmi_trace(trc); -} -#ifdef DSAMPLE_COLOUR32 - if (bmpFormat != BMP_FORMAT_16BIT_LCD_COLOUR) -#endif -#ifdef DSAMPLE_COLOUR16 - if (bmpFormat != BMP_FORMAT_16BIT_LCD_COMPRESSED_COLOUR) -#endif - { - int maxY; - //Either display as much of the image as possible or as much as will fit. - if (bmpSy > sy) - maxY = sy; - else - maxY = bmpSy; - dspl_Clear(posX,posY,(U16)(posX+sx-1),(U16)(posY+sy-1)); - dspl_BitBlt2((short) posX,(short)posY,(USHORT)bmpSx,(USHORT)maxY, - (void *)srcBitmap,0, bmpFormat); - return; - } - - bgdColour = DSPL_GET_BITCOLOUR(bgd_col); - bgdColourArray[0] = (bgdColour & 0x000000FF); - bgdColourArray[1] = (bgdColour & 0x0000FF00) >>8; - bgdColourArray[2] = (bgdColour & 0x00FF0000) >>16; - bgdColourArray[3] = (bgdColour & 0xFF000000) >>24; - for (i=BYTEPERPIXEL;i sx) - { - image_sx = sx - bgd_sx_left; - bgd_sx_right = 0; - } - else - { - bgd_sx_right = sx-(image_sx+bgd_sx_left); - } - if (bgd_sx_right <0) - bgd_sx_right=0; - bgd_sx_right = bgd_sx_right*BYTEPERPIXEL; - bgd_sx_left = bgd_sx_left*BYTEPERPIXEL; - if (image_sx > 0) - image_sx = image_sx*BYTEPERPIXEL; - else - image_sx = 0; - if (image_x > 0) - image_x = image_x*BYTEPERPIXEL; - else - image_x = 0; - if (posY+sy > LCD_ROW) - sy = LCD_ROW - posY; - for (y=posY; y=0) && (yOfsstartY) && (y 0))) - { - image = &srcBitmap[(y-startY)*bmpSx*BYTEPERPIXEL]; - if (bgd_sx_left >0) - memcpy(&screen[yOfs],&bgdColourArray[0],bgd_sx_left); - memcpy(&screen[yOfs+bgd_sx_left],&image[image_x],image_sx); - if (bgd_sx_right >0) - memcpy(&screen[yOfs+bgd_sx_left+image_sx],&bgdColourArray[0],bgd_sx_right); - - } - else - { - memcpy(&screen[yOfs],&bgdColourArray[0],sx*BYTEPERPIXEL); - } - } - } -} -#else -void fastCopyBitmap(int startX, int startY, // start position of bitmap - int bmpSx, int bmpSy, //size of bitmap - char* srcBitmap, - int posX, int posY, // start of area to be copied into - int sx, int sy, // size of area to be copied into - U32 bgd_col, int bmpFormat) -{ - //Fast copy is currently only required for colour bitmaps -} -#endif - - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrMobUpdate | -+--------------------------------------------------------------------+ - - PURPOSE : Shadow display to mobile simulation - -*/ - -void scrMobUpdate (void) -{ -#if defined (WIN32) - USHORT x,y; - USHORT i; - USHORT z; - - if (mtkEnabled) - { - USHORT sdu_len; - - switch (mtkEnabled) - { - case 1: // ASAMPLE - z= LCD_ROW; - sdu_len = 13 * z; // (100 * z Pixels); - { - PALLOC_SDU (mmi_display_req, MMI_DISPLAY_REQ, (USHORT)(sdu_len<<3)); - { - mmi_display_req->c_x = LCD_COL; - mmi_display_req->c_y = z; - i=0; - for (y=0;ysdu.buf[i++] = displayScr[y][x]; - } - - TRACE_EVENT ("Send Display Content"); -#if defined NEW_FRAME - { - { - T_QMSG Message; - - Message.MsgType = MSG_PRIMITIVE; - Message.Msg.Primitive.Prim = D2P(mmi_display_req); - Message.Msg.Primitive.PrimLen = sizeof (T_MMI_DISPLAY_REQ) + LCD_COL_B*z; - #ifdef MEMORY_SUPERVISION - vsi_c_send (VSI_CALLER hCommL1 ,&Message, __FILE__, __LINE__); - #else - vsi_c_send (VSI_CALLER hCommL1 ,&Message); - #endif - } - } -#else -// vsi_c_send (VSI_CALLER hCommL1, D2P(mmi_display_req), sizeof (T_MMI_DISPLAY_REQ) + LCD_COL_B*z); -#endif - } - break; - - case 2: // another target with other dimensions - { - char buf[40]; - sprintf (buf, "LCD NEEDED %d READY %d", lcd_output_needed, lcd_output_ready); - TRACE_EVENT (buf); - } - lcd_output_needed = TRUE; - if (lcd_output_ready) - { - lcd_output_needed = FALSE; - lcd_output_ready = FALSE; - - sdu_len = 14 * 16 + 20; -#if (LCD_ROW >= 64) - { - PALLOC_SDU (mmi_display_req, MMI_DISPLAY_REQ, sdu_len<<3); - - mmi_display_req->c_x = LCD_COL; - mmi_display_req->c_y = 16; - mmi_display_req->attrib.content = 3; - i=0; - for (y=48;y<64;y++) - for (x=0; x < 13; x++) - mmi_display_req->sdu.buf[i++] = displayScr[y][x]; -#if defined NEW_FRAME - { - T_QMSG Message; - - Message.MsgType = MSG_PRIMITIVE; - Message.Msg.Primitive.Prim = D2P(mmi_display_req); - Message.Msg.Primitive.PrimLen = sizeof (T_MMI_DISPLAY_REQ) + 14*16+20; - #ifdef MEMORY_SUPERVISION - vsi_c_send (VSI_CALLER hCommL1 ,&Message, __FILE__, __LINE__); - #else - vsi_c_send (VSI_CALLER hCommL1 ,&Message); - #endif - } -#else - vsi_c_send (VSI_CALLER hCommL1, D2P(mmi_display_req), sizeof (T_MMI_DISPLAY_REQ) + 14*16+20); -#endif - } -#endif -#if (LCD_ROW >= 48) - { - PALLOC_SDU (mmi_display_req, MMI_DISPLAY_REQ, (USHORT)(sdu_len<<3)); - - mmi_display_req->c_x = LCD_COL; - mmi_display_req->c_y = 16; - mmi_display_req->attrib.content = 2; - i=0; - for (y=32;y<48;y++) - for (x=0; x < 13; x++) - mmi_display_req->sdu.buf[i++] = displayScr[y][x]; -#if defined NEW_FRAME - { - T_QMSG Message; - - Message.MsgType = MSG_PRIMITIVE; - Message.Msg.Primitive.Prim = D2P(mmi_display_req); - Message.Msg.Primitive.PrimLen = sizeof (T_MMI_DISPLAY_REQ) + 14*16+20; - #ifdef MEMORY_SUPERVISION - vsi_c_send (VSI_CALLER hCommL1 ,&Message, __FILE__, __LINE__); - #else - vsi_c_send (VSI_CALLER hCommL1 ,&Message); - #endif - } -#else - vsi_c_send (VSI_CALLER hCommL1, D2P(mmi_display_req), sizeof (T_MMI_DISPLAY_REQ) + 14*16+20); -#endif - } -#endif - { - PALLOC_SDU (mmi_display_req, MMI_DISPLAY_REQ, (USHORT)(sdu_len<<3)); - - mmi_display_req->c_x = LCD_COL; - mmi_display_req->c_y = 16; - mmi_display_req->attrib.content = 1; - i=0; - for (y=16;y<32;y++) - for (x=0; x < 13; x++) - mmi_display_req->sdu.buf[i++] = displayScr[y][x]; -#if defined NEW_FRAME - { - T_QMSG Message; - - Message.MsgType = MSG_PRIMITIVE; - Message.Msg.Primitive.Prim = D2P(mmi_display_req); - Message.Msg.Primitive.PrimLen = sizeof (T_MMI_DISPLAY_REQ) + 14*16+20; - #ifdef MEMORY_SUPERVISION - vsi_c_send (VSI_CALLER hCommL1 ,&Message, __FILE__, __LINE__); - #else - vsi_c_send (VSI_CALLER hCommL1 ,&Message); - #endif - } -#else - vsi_c_send (VSI_CALLER hCommL1, D2P(mmi_display_req), sizeof (T_MMI_DISPLAY_REQ) + 14*16+20); -#endif - } - { - PALLOC_SDU (mmi_display_req, MMI_DISPLAY_REQ, (USHORT)(sdu_len<<3)); - - mmi_display_req->c_x = LCD_COL; - mmi_display_req->c_y = 16; - mmi_display_req->attrib.content = 0; - i=0; - for (y=0;y<16;y++) - for (x=0; x < 13; x++) - mmi_display_req->sdu.buf[i++] = displayScr[y][x]; -#if defined NEW_FRAME - { - T_QMSG Message; - - Message.MsgType = MSG_PRIMITIVE; - Message.Msg.Primitive.Prim = D2P(mmi_display_req); - Message.Msg.Primitive.PrimLen = sizeof (T_MMI_DISPLAY_REQ) + 14*16+20; - #ifdef MEMORY_SUPERVISION - vsi_c_send (VSI_CALLER hCommL1 ,&Message, __FILE__, __LINE__); - #else - vsi_c_send (VSI_CALLER hCommL1 ,&Message); - #endif - } -#else - vsi_c_send (VSI_CALLER hCommL1, D2P(mmi_display_req), sizeof (T_MMI_DISPLAY_REQ) + 14*16+20); -#endif - } - TRACE_EVENT ("Send Display Content"); - } - break; - } - } -#endif - -#ifdef BSAMPLE - if (mobEnabled) - { -/* ## scratch is not required and function mfwExtOut is - ## not doing anything - sprintf(scratch,"%s%s %d",scrHeader,"disp",LCD_COL_B); - xIndex = 0; - mfwExtOut(scratch); - */ - } -#endif -} - - -int dspl_GetContrastColour( int ipCol) -{ - switch (ipCol & 0x00808080) - { - case 0x000000: return (0x00FFFFFF); - case 0x000080: return (0x00FFFF00); - case 0x008000: return (0x00FF00FF); - case 0x008080: return (0x00FF0000); - case 0x800000: return (0x0000FFFF); - case 0x800080: return (0x0000FF00); - case 0x808000: return (0x000000FF); - case 0x808080: return (0x00000000); - default: return (0x00808080); - } - return (0x00808080); -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrLCDUpdate | -+--------------------------------------------------------------------+ - - PURPOSE : Shadow display to LCD - -*/ - -//GW Procedure/data supplied by new TI Driver V5.3.1 -#ifdef R2D_ENABLED - -static T_R2D_SHAPE_PTR scrDisplayRect = NULL; //rectangle defined as shape of the display -static T_R2D_GC_PTR scrPicPtr = NULL; //Pointer to gc with picture in it (b+w and col) -static T_RVF_MB_ID mb_id; //ID of memory bank -void r2d_refresh(void); -int riv_err; -extern T_R2D_GC_PTR r2d_g_lcd_gc; -#endif // R2D_ENABLED -static int picInit = 0; //Have we set up the mb id etc yet ? - -//Initialises data required for bolck copy of a 'picture' -void scrRivPictureClear(void) -{ -#ifdef CSAMPLE - memset(display_bw,0,sizeof(display_bw)); -#ifdef USE_PLOT - memset(displayCopy_bw,0,sizeof(displayCopy_bw)); - pictureCopy_bw = &displayCopy_bw[3]; //start of input data -#endif - - display_bw[0] = LCD_COL; - display_bw[1] = LCD_ROW; - display_bw[2] = DISPLAY_SIZE; - picture_bw = &display_bw[3]; //start of input data -#endif - -#ifdef DSAMPLE_COLOUR -#ifdef USEBUFFER - display_colour[0] = LCD_COL; - display_colour[1] = LCD_ROW; - display_colour[2] = DISPLAY_SIZE; - picture_col = &display_colour[3]; //start of input data -#else -//Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg -//the picture_col is assigned with the address of the new frame buffer - #ifdef FF_MMI_NEW_LCD_API_MIG - picture_col = lcd_frame_buffer; - #else - picture_col = r2d_get_pixmap(r2d_g_lcd_gc); -#endif -#endif - { - U32 lWord,bitCol; - int j,y; - //GW When clearing screen - do not allow transparent background colours! - int bgdCol = dspl_GetBgdColour(); - int fgdCol = dspl_GetFgdColour(); - if (((bgdCol & 0x00F0F0F0) == (fgdCol & 0x00F0F0F0)) || - ((bgdCol & 0xFF000000) == TRANSPARENT_32BIT_COLOUR)) - { - /*Foreground and background colours are the same (or near enough) */ - /* or background colour is transparent */ - /*Select a colour that will contrast with the current foreground colour */ - bgdCol = dspl_GetContrastColour(fgdCol); - } - bitCol = (DSPL_GET_BITCOLOUR(bgdCol)) & 0x00FFFFFF; - -#ifdef DSAMPLE_COLOUR32 - bgdColourArray[0] = (bitCol & 0x000000FF); - bgdColourArray[1] = (bitCol & 0x0000FF00) >>8; - bgdColourArray[2] = (bitCol & 0x00FF0000) >>16; - bgdColourArray[3] = (bitCol & 0xFF000000) >>24; - for (j=4;j>8; - for (j=2;j> 2) | TOP_BITS_SET; -#else - //B+W display - blank every second pixel - *picPtr = (*picPtr) & mask; -#endif - picPtr++; - } - } - } -#endif /* _SIMULATION_ */ -} - - -//Set colour (only when different from last time) -void scrSetR2DFgdCol(UINT32 col) -{ - U16 opCol_a,opCol_r,opCol_g,opCol_b; - static UINT32 oldCol = 0xFFFFFFFF; - if (col != oldCol) - { -#ifdef DSAMPLE_COLOUR - opCol_a = 0xFF; // ((col & 0x0000FF00) >> 16); - opCol_r = ((col & 0x0000F800) >> 8); - opCol_g = ((col & 0x000007E0) >> 3); - opCol_b = ((col & 0x0000001F) << 3); -#else - opCol_a = 0xFF; // ((col & 0x0000FF00) >> 16); - opCol_r = ((col & 0x000000E0) ); - opCol_g = ((col & 0x0000001C) << 3); - opCol_b = ((col & 0x00000003) << 6); - if (opCol_r == 0) opCol_r = 0x80; - if (opCol_g == 0) opCol_g = 0x40; -#endif -#ifdef R2D_ENABLED - r2d_set_foreground_color_with_argb(r2d_g_lcd_gc, opCol_a, opCol_r, opCol_g, opCol_b ); - oldCol = col; -#endif - } -} -//Set colour (only when different from last time) -void scrSetR2DBgdCol(UINT32 col) -{ - U16 opCol_a,opCol_r,opCol_g,opCol_b; - static UINT32 oldCol = 0xFFFFFFFF; - if (col != oldCol) - { -#ifdef DSAMPLE_COLOUR - opCol_a = 0xFF; // ((col & 0x0000FF00) >> 16); - opCol_r = ((col & 0x0000F800) >> 8); - opCol_g = ((col & 0x000007E0) >> 3); - opCol_b = ((col & 0x0000001F) << 3); -#else - opCol_a = 0xFF; // ((col & 0x0000FF00) >> 16); - opCol_r = ((col & 0x000000E0) ); - opCol_g = ((col & 0x0000001C) << 3); - opCol_b = ((col & 0x00000003) << 6); - if (opCol_r == 0) opCol_r = 0x80; - if (opCol_g == 0) opCol_g = 0x40; -#endif -#ifdef R2D_ENABLED - r2d_set_background_color_with_argb(r2d_g_lcd_gc, opCol_a, opCol_r, opCol_g, opCol_b ); - oldCol = col; -#endif - } -} -//GW Procedure/data supplied by new TI Driver V5.3.1 -//length of array (32bit words) to hold a copy of the screen (maybe) -#ifdef R2D_ENABLED -extern T_R2D_GC_PTR r2d_g_lcd_gc; -#endif -/* */ -void scrPlotR2DPoint(U32 col, INT16 x, INT16 y) -{ -#ifdef R2D_ENABLED - static U32 fCol=0xFFFFFFFF; - static U32 bCol=0xFFFFFFFF; - static U32 flip=0; - if (fCol==col) - { - scrSetR2DFgdCol(col ); - r2d_draw_point(r2d_g_lcd_gc,x,y); - } - else if (bCol == col) - { - scrSetR2DBgdCol(col ); - r2d_erase_point(r2d_g_lcd_gc,x,y); - } - else if (flip) - { - flip = 0; - scrSetR2DBgdCol(col ); - - r2d_erase_point(r2d_g_lcd_gc,x,y); - bCol = col; - } - else - { - flip = 1; - scrSetR2DFgdCol(col ); - r2d_draw_point(r2d_g_lcd_gc,x,y); - fCol = col; - } -#endif -} - -#ifdef BSAMPLE -void scrLCDUpdate (void) -{ -#ifdef USE_PLOT - int nPlots=0; - - int row,rowstart; - int kstart,kend,k; - UBYTE *bcopy; - int i,j; - UBYTE m; - UBYTE *bm; -#else - int i; -#endif - -#if defined (WIN32_SIM) - return; -#endif - if (!scrEnabled) - return; - -#ifdef USE_PLOT - bm = &displayScr[0][0]; - bcopy = &displayCopy[0][0]; - m = 0x80; - for (j = 0; j < LCD_ROW; j++) - { - for (k = 0; k < (LCD_COL+7)/8; k++) - { - //Only plot data if it has changed since last time - if (*bm != *bcopy) - { - m = 0x80; - kstart = k*8; - kend = k*8+8; - if (kend>LCD_COL) - kend = LCD_COL; - for (i = kstart; i < kend; i++) - { -#ifdef R2D_ENABLED - if ((*bm) & m) - - r2d_draw_point(r2d_g_lcd_gc,i,j); - else - r2d_erase_point(r2d_g_lcd_gc,j,i); -#endif - m >>= 1; - } - *bcopy = *bm;//Update value - } - bm++; - bcopy++; - } - } - -#else - //* work around limitations of TI driver ! * - for (i = 0; i < LCD_ROW; i++) - { - displayScr[i][LCD_COL_B-1] &= 0xF0; - displayScr[i][LCD_COL_B-1] |= (UBYTE) ((displayScr[i][6] >> 2) & 0x0F); - } - - LCD_PixBlt(0,0,LCD_COL_B*8,8,(char*)&displayScr[0][0]); - LCD_PixBlt(0,8,LCD_COL_B*8,8,(char*)(&(displayScr[8][0]))); - LCD_PixBlt(0,16,LCD_COL_B*8,8,(char*)(&(displayScr[16][0]))); - LCD_PixBlt(0,24,LCD_COL_B*8,8,(char*)(&(displayScr[24][0]))); -#if (!CUST)//JVJE #if (CUST==1) - LCD_PixBlt(0,32,LCD_COL_B*8,8,(char*)(&(displayScr[32][0]))); - LCD_PixBlt(0,40,LCD_COL_B*8,8,(char*)(&(displayScr[40][0]))); -#endif -#endif - -} -#endif - - - - -#ifdef CSAMPLE -void scrLCDUpdate (void) -{ -int kstart,kend,k; -int row,rowstart; -int i,j; -INT16 x1,y1; -UINT32 m; -UINT32 *bm; -UINT32 *bcopy; -static UINT32 col=0; -int count; -int nPlots=0; - -#if defined (WIN32_SIM) - return; -#endif - if (!scrEnabled) - return; - -#ifdef USE_PLOT - - bm = picture_bw; - bcopy = pictureCopy_bw; - for (j = 0; j < DISPLAY_SIZE; j++) - { - if (*bm != *bcopy) - { - //Only plot data if it has changed since last time - m = 0x80000000; - - x1 = j / LCD_COL_NUM_LWORDS; - y1 = j % LCD_COL_NUM_LWORDS; - y1 = y1 << 5; - y1 = (y1 + 16); - x1 = (scrX-1)-x1; - kstart = y1; - kend = y1+32; - for (i = kstart; i < kend; i++) - { - nPlots++; -#ifdef R2D_ENABLED - if ((*bm) & m) - r2d_draw_point(r2d_g_lcd_gc,x1,(i%64)); - else - - r2d_erase_point(r2d_g_lcd_gc,x1,(i%64)); -#endif - m >>= 1; - } - *bcopy = *bm;//Update value - } - bm++; - bcopy++; - if (nPlots > MAX_NUMBER_PLOTS) - return; - } -#else - if (scrPicPtr != NULL) - { -#ifdef R2D_ENABLED - r2d_fast_blit(scrPicPtr,r2d_g_lcd_gc); -#endif - vsi_t_sleep(VSI_CALLER (20)); - } -#endif //old/new -} -#endif //CSAMPLE - -//June 03, 2005 REF: GSM-ENH-31636 xpradipg -//CRR 28825: xpradipg - 11 Feb 2005 -#if (defined(DSAMPLE) || defined(ESAMPLE) || defined(ISAMPLE) || defined(CALLISTO))// changes for flag cleanup and addition for ISAMPLE -void scrLCDUpdate (void) -{ -// Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg -//the co-ordinates are set to the entire LCD as we will be refreshing whole LCD -#ifdef FF_MMI_NEW_LCD_API_MIG -lcd_fb_coordinates p_lcd_coord = { 0,0,LCD_COL,LCD_ROW}; -#endif -#if defined (WIN32_SIM) - return; -#endif - if (!scrEnabled) - return; -//Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg -//call the new lcd AP in place of the old for refresh -#ifdef FF_MMI_NEW_LCD_API_MIG - lcd_display(DISPLAY_MAIN_LCD,(U16*)picture_col,&p_lcd_coord); -#else -#ifdef R2D_ENABLED - r2d_flush(); -#endif -#endif -} -#endif//D-sample - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrMobCommand | -+--------------------------------------------------------------------+ - - PURPOSE : Command string from mobile simulation - -*/ - - -void scrMobCommand (char *s) -{ -#ifdef BSAMPLE - char *p; - unsigned char *q; - int i; - char scratch [LCD_ROW*LCD_COL_B*2+100]; /* command buffer */ - - if (strstr(s,"ena") == s) - { - mobEnabled = 1; - return; - } - if (strstr(s,"dis") == s) - { - mobEnabled = 0; - return; - } - if (strstr(s,"ok") == s) - { - if (xIndex < 0) - return; - strcpy(scratch,scrHeader); - if (xIndex >= sizeof(displayScr)) - { - strcat(scratch,"done"); - mfwExtOut(scratch); - return; - } - strcat(scratch,"data "); - p = scratch + strlen(scratch); - sprintf(p,"%04d %04d ",xIndex,LCD_COL_B*LCD_ROW/DISPL_DIV); - p = scratch + strlen(scratch); - q = (UBYTE *) displayScr; - for (i = 0; i < LCD_COL_B * LCD_ROW / DISPL_DIV; i++) - { - sprintf(p,"%02x",q[xIndex++]); - p += 2; - } - *p = '\0'; - mfwExtOut(scratch); - return; - } - #endif -} - - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrInit | -+--------------------------------------------------------------------+ - - PURPOSE : initialize screen driver - -*/ - -void scrInit (void) -{ -// Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg -//New LCD API for initialization -#ifdef FF_MMI_NEW_LCD_API_MIG - lcd_initialization(DISPLAY_MAIN_LCD); -#else - LCD_SetPower(); /* ES!! */ - LCD_Reset(); - LCD_Enable(1); - -#endif - dspl_InitColour (); - -#ifdef LSCREEN - font_initFont(1); -#else - font_initFont(0); -#endif - -#ifdef BSAMPLE - memset(displayScr,0,sizeof(displayScr)); - memset(displayCopy,0,sizeof(displayCopy)); -#else - scrRivPictureInit(); -#endif -//Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg -//clear the buffer with background color, since r2d_erase does the same -#ifdef FF_MMI_NEW_LCD_API_MIG - scrRivPictureClear(); -#else -#ifdef R2D_ENABLED - r2d_erase( r2d_g_lcd_gc ); -#endif -#endif - mobEnabled = 0; - scrEnabled = 1; - internal = 0; - scrX = LCD_COL; - scrY = LCD_ROW; - xIndex = -1; - displayData.DisplayType = DSPL_TYPE_GRAPHIC; - //GW Set display window to full screen - dspl_ResetWindow(); -} - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrExit | -+--------------------------------------------------------------------+ - - PURPOSE : finalize screen driver - -*/ - -void scrExit (void) -{ - LCD_Enable(0); - mobEnabled = 0; - scrEnabled = 0; - xIndex = -1; -} - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrUpdate | -+--------------------------------------------------------------------+ - - PURPOSE : set screen update mode - -GW 18/09/01 clear text invert flag whenever display is enabled/disabled. -*/ -//GW mmi_trace is a call to the MMI to provide timings for MMI updates - -//REMOVE FROM FINAL BUILD (if I forget!) -int scrUpdate (int onOff) -{ - int ena = scrEnabled; - txtInvert = 0; //clear text invert flag whenever display is enabled/disabled. - scrEnabled = onOff; - if (scrEnabled) - { -#ifdef MMI_TRACE -mmi_trace("scrupdate() enable start"); -#endif - scrLCDUpdate(); - scrMobUpdate(); -#ifdef MMI_TRACE -mmi_trace("scrupdate() enable end"); -#endif - } - else - { -#ifdef MMI_TRACE -mmi_trace("scrupdate() disabled"); -#endif - } - return ena; -} - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrSize | -+--------------------------------------------------------------------+ - - PURPOSE : retrieve display size - -*/ - -void scrSize (int *x, int *y) -{ - *x = scrX; - *y = scrY; -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrOnOff | -+--------------------------------------------------------------------+ - - PURPOSE : switch display On/Off - -*/ - -void scrOnOff (int on) -{ -//kk to be checked -/* ## scratch is not required and function mfwExtOut is - ## not doing anything - sprintf(scratch,"%sscrOnOff:%d",scrHeader,on); - mfwExtOut(scratch); - */ -} - -#if (!CUST)//JVJE #if (CUST==1) -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrLight | -+--------------------------------------------------------------------+ - - PURPOSE : switch display backlight On/Off - -*/ - -void scrLight (int on) -{ -//kk to be checked -/* ## scratch is not required and function mfwExtOut is - ## not doing anything - sprintf(scratch,"%sscrLight:%d",scrHeader,on); - mfwExtOut(scratch); - */ -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrClear | -+--------------------------------------------------------------------+ - - PURPOSE : clear display - -*/ - -void scrClear (void) -{ - -#ifdef BSAMPLE - memset(displayScr,0,sizeof(displayScr)); -#else - scrRivPictureClear(); -#endif - - if (scrEnabled) - { -//Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg -//this is specific to old driver. A corresponding API exist with new apis. -//need to check if it can be used -#ifndef FF_MMI_NEW_LCD_API_MIG - LCD_Clear(); /* TI driver function */ -#endif - scrMobUpdate(); /* update mobile simulation */ - } -} -#endif //CUST==1 - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrClearRect | -+--------------------------------------------------------------------+ - - PURPOSE : clear display area - -*/ -#ifdef DSAMPLE_LITE - -void scrDrawFilledRect (int px, int py, int sx, int sy, U32 col) -{ - int i,j; - U32 opCol; - int word; - - //Limit rectangle to the size of the screen. - if ((px >= scrX) || (py >= scrY)) - return; - - if ((col& 0xFF000000) == TRANSPARENT_32BIT_COLOUR) - return; //Background colour is transparent - - //Allow -ve sizes but change data round - if (sx <0) - { - px = px+sx; - sx = -sx; - } - if (sy <0) - { - py = py+sy; - sy = -sy; - } - //Limit rectangle to size of window - if (px=win_x2) - sx = win_x2 - px-1; - if (py+sy >=win_y2) - sy = win_y2 - py-1; - if ((sx <= 0) || (sy<=0)) - return;//cannot draw zero width rectangle. - - opCol = col; - { - U32 maskL, maskR; - int skipBits,startWord,endWord; - maskL = 0xFFFFFFFF; - skipBits = px & 0x1F; - maskL = maskL << skipBits; - startWord = px >> 5; - maskR = 0xFFFFFFFF; - skipBits = (px+sx) & 0x1F; - maskR = ~(maskR << skipBits); - endWord = (px+sx) >> 5; - if (startWord == endWord) - { - maskL = maskL & maskR; - maskR = maskL; - } - - if (col == 0) - { //Set bgd colour to Black (0) - for (j = py; j < py + sy; j++) - { - word = DSPL_GET_LWORD(px,j); - picture_bw[word] = picture_bw[word] & (~maskL); - word++; - for (i = startWord+1; i < endWord; i++) - { - picture_bw[word] = 0; - word++; - } - word = DSPL_GET_LWORD(px+sx,j); - picture_bw[word] = picture_bw[word] & (~maskR); - } - } - else - { //Set bgd colour to White (1) - for (j = py; j < py + sy; j++) - { - word = DSPL_GET_LWORD(px,j); - picture_bw[word] = picture_bw[word] | (maskL); - word++; - for (i = startWord+1; i < endWord; i++) - { - picture_bw[word] = 0xFFFFFFFF; - word++; - } - word = DSPL_GET_LWORD(px+sx,j); - picture_bw[word] = picture_bw[word] | (maskR); - } - } - } -} -#endif - -#ifdef DSAMPLE_COLOUR - -void scrDrawFilledRect (int px, int py, int sx, int sy, U32 col) -{ - int i,j; - U32 opCol; - char* screen; - - //Limit rectangle to the size of the screen. - if ((px >= scrX) || (py >= scrY)) - return; - - if ((col& 0xFF000000) == TRANSPARENT_32BIT_COLOUR) - return; //Background colour is transparent - - //Allow -ve sizes but change data round - if (sx <0) - { - px = px+sx; - sx = -sx; - } - if (sy <0) - { - py = py+sy; - sy = -sy; - } - //Limit rectangle to size of window - if (px win_x2) - sx = win_x2 - px; - if (py+sy > win_y2) - sy = win_y2 - py; - if ((sx <= 0) || (sy<=0)) - return;//cannot draw zero width rectangle. - - opCol = col; - //GW Fix - invert colour -#ifdef USE_PLOT - for (j = py; j < py + sy; j++) - { - for (i = px; i < px+sx; i++) - scrPoint(i,j,opCol); - } -#else - { - U32 lWord,bgdColour; - int y; - screen = (char*)picture_col; - bgdColour = DSPL_GET_BITCOLOUR(col); - bgdColourArray[0] = (bgdColour & 0x000000FF); - bgdColourArray[1] = (bgdColour & 0x0000FF00) >>8; - bgdColourArray[2] = (bgdColour & 0x00FF0000) >>16; - bgdColourArray[3] = (bgdColour & 0xFF000000) >>24; - for (i=BYTEPERPIXEL;i= scrX || py >= scrY - || sx < 0 || sy < 0) - return; - if (px + sx > scrX) - sx = scrX - px; - if (py + sy > scrY) - sy = scrY - py; - - //Limit rectangle to size of window - if (pxwin_x2) - sx = win_x2 - px; - if (py+sy >win_y2) - sy = win_y2 - py; - if ((sx <= 0) || (sy<=0)) - return;//cannot draw zero width rectangle. - -#ifdef BSAMPLE - x1 = px / 8; /* first x offset */ - x2 = (px + sx) / 8; /* last x offset */ - m1 = m2 = 0xff; - m1 = (UBYTE) ~(m1 >> (px & 7)); /* left mask */ - m2 = (UBYTE) (m2 >> ((px + sx) & 7)); /* right mask */ - if (x1 == x2) - m1 = m2 = m1 | m2; /* combined masks */ - for (j = py; j < py + sy; j++) - { - displayScr[j][x1] &= m1; - for (i = x1 + 1; i < x2; i++) - displayScr[j][i] = '\0'; - displayScr[j][x2] &= m2; - } -#endif - -#ifdef CSAMPLE - for (i=0;i scrY) - return; - - while ((*txt) && (x <= scrX)) - { - current_code = (USHORT)((*txt)<<8)+(USHORT)((*txt)>>8);/*The USHORT is inverted, therefore we have to apply this simple change*/ - current_bitmap = get_bitmap(current_code); - if (!current_bitmap) /*ASCII codes will be represented*/ - { - first_byte_code = (USHORT)((*txt)&0xFF); - error_bitmap = get_bitmap(first_byte_code); - if (error_bitmap) - { - dspl_show_bitmap(x,y,error_bitmap,SHOWBITMAP_INVERT); - x += error_bitmap->width; - } - second_byte_code = (USHORT)((*txt)>>8); - error_bitmap = get_bitmap(second_byte_code); - if (error_bitmap) - { - dspl_show_bitmap(x,y,error_bitmap,SHOWBITMAP_INVERT); - x += error_bitmap->width; - } - } - else - { - dspl_show_bitmap(x,y,current_bitmap,SHOWBITMAP_NORMAL); - x += current_bitmap->width; - } - txt++; - } - -} - - -#ifndef DSAMPLE_COLOUR -//Should work for DSAMPLE_LITE -void dspl_show_bitmap(int x,int y,t_font_bitmap* current_bitmap,U32 attr ) -{ - USHORT i, j,a,b; - int bmpWidthBytes; - bmpWidthBytes = (current_bitmap->width + 0x07) >> 3; - - for (i = 0; i < current_bitmap->height; i++) - for (j = 0; j < current_bitmap->width; j++) - { - a = (j&(0x07)); - b = i*(bmpWidthBytes)+((j&0xF8)>>3); - if ((attr & SHOWBITMAP_SCALE_2x4) == 0) - { - if ((attr & SHOWBITMAP_NORMAL_MASK) == SHOWBITMAP_NORMAL) - scrPoint(x+j,y+i,current_bitmap->bitmap[b]&(0x80>>a)); - else - scrPoint(x+j,y+i,((UBYTE)~(current_bitmap->bitmap[b]))&(0x80>>a)); - } - else - { - int x1,y1; - int px = (current_bitmap->bitmap[b]&(0x80>>a)); - for (x1 = x+j*2;x1 < x+j*2+2; x1++) - for (y1 = y+i*4; y1format) - { - case BMP_FORMAT_BW_UNPACKED: - case BMP_FORMAT_BW_PACKED: - //b+w bitmap - deal with both packed and unpacked. - bmpMask = 0x80; - bmpByte = 0; - if (attr & SHOWBITMAP_INVERT) //invert - { - fCol = dspl_GetBgdColour(); - bCol = dspl_GetFgdColour(); - } - else - { - fCol = dspl_GetFgdColour(); - bCol = dspl_GetBgdColour(); - } - if (fCol==bCol) - { - fCol = 0x000000FF; - bCol =0x00FFFF00; - } - for (i = 0; i < current_bitmap->height; i++) - { - for (j = 0; j < current_bitmap->width; j++) - { - /* a = (j&(0x07)); - b = i*((current_bitmap->bitmapSize)/(current_bitmap->height))+((j&0xF8)>>3); - bitSet = current_bitmap->bitmap[b]&(0x80>>a);*/ - bitSet = current_bitmap->bitmap[bmpByte]&(bmpMask); - - /*MC SPR 1526*/ - if (bitSet) - col = fCol; - else - col = bCol; - if (col!=TRANSPARENT_32BIT_COLOUR)/*if colour transparent, don't draw point*/ - { - scrPoint(x+j,y+i,col); - } - /*MC 1526 end*/ - - if (bmpMask <= 1) - { - bmpMask = 0x80; - bmpByte++; - } - else - bmpMask = bmpMask >>1; - } - // If we have an unpacked bitmaps and we are not already on a new byte, we move to a new byte - if ((current_bitmap->format == BMP_FORMAT_BW_UNPACKED) && (bmpMask != 0x80)) - { - bmpMask = 0x80; - bmpByte++; - } - } - break; - case BMP_FORMAT_256_COLOUR: - //bitmap is 256 colour bitmap - ignore 'attr' - bmpByte = 0; - - for (i = 0; i < current_bitmap->height; i++) - { - for (j = 0; j < current_bitmap->width; j++) - { - UINT32 col; - UINT32 colR,colG,colB; - col = current_bitmap->bitmap[bmpByte]; - if (col!=TRANSPARENT_256_COL) - { - bitCol = (((col &0xE0) <<16) | - ((col &0x1C) <<11) | - ((col &0x03) << 6));/**/ - //assume 16 bit colour - scrPoint(x+j, y+i,bitCol); - } - bmpByte = bmpByte+1; //move to next byte - - } - } - break; - case BMP_FORMAT_32BIT_COLOUR: - //bitmap is a 32 bit colour bitmap - ignore 'attr' - bmpByte = 0; - for (i = 0; i < current_bitmap->height; i++) - { - for (j = 0; j < current_bitmap->width; j++) - { - //32 bit bitmap - data is in bytes - //bmpByte = (i*current_bitmap->width+j)*4; - bitCol = ((current_bitmap->bitmap[bmpByte] <<24) | - (current_bitmap->bitmap[bmpByte+1] <<16) | - (current_bitmap->bitmap[bmpByte+2] <<8) | - (current_bitmap->bitmap[bmpByte+3])); - if ((bitCol & 0xFF000000)!=TRANSPARENT_32BIT_COLOUR) - scrPoint(x+j,y+i,bitCol); - bmpByte = bmpByte+4; //move to next 32bit word - } - } - break; - case BMP_FORMAT_16BIT_LCD_COLOUR: //32 bits only first 2 bytes used - case BMP_FORMAT_16BIT_LCD_COMPRESSED_COLOUR: //16 bits - bmpByte = 0; - if (current_bitmap->format == BMP_FORMAT_16BIT_LCD_COMPRESSED_COLOUR) - step = 2; - else - step = 4; - for (i = 0; i < current_bitmap->height; i++) - { - for (j = 0; j < current_bitmap->width; j++) - { - //32 bit bitmap - data is in bytes - //bmpByte = (i*current_bitmap->width+j)*4; - bitCol = ((current_bitmap->bitmap[bmpByte+1] <<8) | - (current_bitmap->bitmap[bmpByte])); - if ((bitCol & 0x0000FFFF)!=TRANSPARENT_16BIT_COL) - { - - lWord = DSPL_GET_LWORD(x+j,y+i); -// July 1, 2005 REF: CRR 32677 - xpradipg -// The data present of all 16bit images are in the negated format hence we -// renegate to get it in the right format -#if (defined(ISAMPLE) ||defined(CALLISTO)) - bitCol = ~bitCol; -#endif - DSPL_SET_BITCOLOUR(x+j,lWord,bitCol,"dsplShowbitmap"); -} - bmpByte = bmpByte+step; //move to next 32/16bit word - } - } - - break; - default: //Unknown format - break; - } -} -#endif - - -#define NO_COLOUR 0xFF123456 -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : dspl_setBorderWidth | -+--------------------------------------------------------------------+ - - PURPOSE : sets current border width - -GW 10/02/03 SPR#1721 - Created -*/ -static int txtBorder=0; -int dspl_setBorderWidth(int borderSize) -{ - int oldBorder; - oldBorder = txtBorder; - if ((borderSize >=0) && (borderSize <=4)) - txtBorder = borderSize; - return (oldBorder); -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : dspl_getBorderWidth | -+--------------------------------------------------------------------+ - - PURPOSE : returns current border width - -GW 10/02/03 SPR#1721 - Created - -*/ -int dspl_getBorderWidth(void) -{ - return(txtBorder); -} -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrCharBorderOutput | -+--------------------------------------------------------------------+ - - PURPOSE : draw text with a border - -GW 10/02/03 SPR#1721 - Created -*/ -void scrCharBorderOutput(t_font_bitmap* chrBmp, - unsigned int fgdCol,unsigned int bgdCol,unsigned int borderCol, - int bWidth, - int px,int py - ) -{ - int x,y,i; - int line[10]; - int ofs; - int bgdLine; - int col; - int emask,pmask; - int init_emask = (0x01 << (28+bWidth)); - int init_pmask = (0x01 << (28+bWidth)); -/* - -*/ - for (i=0;i<10;i++) - line[i] = 0; - - //trace("col=",fgdCol, bgdCol,borderCol,0x13); - - //set up border mask - for (i=1;i> i) | (init_pmask << i); - } - //trace("masks=",init_emask,init_pmask,0,0x12); - - for (y=-bWidth;yheight+bWidth;y++) - { - //trace("y,ht,bWidth",y,chrBmp->height,bWidth, 0x03); - for (i=0;iheight) - { - //work out where we want to display background - bgdLine = 0x0FFFFFF0; - bgdLine = bgdLine & (bgdLine << (24-chrBmp->width)); - //Assume bitmaps are unpacked - switch((chrBmp->width+7) & (0xF8)) - { - case 0x00: //no data - break; - case 0x08: // 1 byte/char - ofs = y+bWidth; - line[bWidth*2] = ((unsigned int)chrBmp->bitmap[ofs]) << 20; - break; - case 0x10: // 2 bytes/char - ofs = (y+bWidth)*2; - line[bWidth*2] = (((unsigned int)chrBmp->bitmap[ofs]) << 20) | - (((unsigned int)chrBmp->bitmap[ofs+1]) << 12) ; - break; - case 0x18: // 3 bytes/char - ofs = (y+bWidth)*3; - line[bWidth*2] = (((unsigned int)chrBmp->bitmap[ofs]) << 20) | - (((unsigned int)chrBmp->bitmap[ofs+1]) << 12) | - (((unsigned int)chrBmp->bitmap[ofs+2]) << 4) ; - break; - default:// unable to handle bitmaps > 24 pixels wide - //output checkerboard pattern as an error - if (y &0x01) - line[bWidth*2] = 0x0CCCCCC0; - else - line[bWidth*2] = 0x05555550; - break; - } - } - else - { - line[bWidth*2] = 0x00000000; - bgdLine = 0x00; - } - //trace("line=",line[0],line[1], line[2], 0x13); - - emask = init_emask; // if any of the 3 pixels are set - erase point - pmask = init_pmask; // only when pixel is set - plot point. - - for (x=-bWidth;xwidth+bWidth;x++) - { - col = NO_COLOUR; - if (line[bWidth] & pmask) - { - //pixel is in fgd colour - col = fgdCol; - } - else - { - for (i=0;i>1; - pmask = pmask>>1; -// trace("masks=",emask,pmask,col,0x13); - } - } -} - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrFastCharOutput | -+--------------------------------------------------------------------+ - - PURPOSE : draw text avoiding using scrPoint - -GW 10/02/03 SPR#1736 - Created -*/ -#ifdef DSAMPLE_COLOUR - -void scrFastCharOutput(t_font_bitmap* chrBmp, - unsigned int fColconv,unsigned int bColconv, - int x,int y - ) -{ - int fHeight = dspl_GetFontHeight(); - int ofs = chrBmp->height - fHeight; - int width = chrBmp->width; - int i,j,k = 0; - int sx,sy,ex,ey,lWord; - int bitSet; - UBYTE mask; - int ofsj,nbytes; - unsigned int col; - //ensure that the data is never wiritten 'off-screen' - if (x+width > win_x2) - ex = win_x2-x; - else - ex = width; - if (y+fHeight > win_y2) - ey = win_y2-y; - else - ey = fHeight; - if (x < win_x1) - sx = win_x1-x; - else - sx = 0; - if (y < win_y1) - sy = win_y1-y; - else - sy = 0; - - nbytes = (width+7) >>3; - ofs = ofs + sy; - for (i=sy;i> (sx & 0x07); - ofsj = sx >> 3; - for (j=sx;j=0) - bitSet = chrBmp->bitmap[ofs*nbytes+ofsj]&(mask); - else - bitSet = 0; - - if (bitSet) - col = fColconv; - else - col = bColconv; - if (col!=TRANSPARENT_32BIT_COLOUR) - { - lWord = DSPL_GET_LWORD(j+x,i+y); - DSPL_SET_BITCOLOUR(j+x,lWord,col,"scrFastCharOutput"); - } - mask = mask >> 1; - if (mask==0) - { - ofsj++; - mask = 0x80; - } - } - ofs++; - } -} -#endif - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrCharOutput | -+--------------------------------------------------------------------+ - - PURPOSE : draw text - -GW 10/02/03 SPR#1736 - Created -*/ -void scrCharOutput(t_font_bitmap* chrBmp, - unsigned int fCol,unsigned int bCol, - int x,int y, - int wChar, int hChar - ) -{ - int fHeight = dspl_GetFontHeight(); - int ofs = chrBmp->height - fHeight; - int width = chrBmp->width; - int i,j,k = 0; - int bitSet; - UBYTE mask; - int ofsj,nbytes; - unsigned int col; - int shiftj; - ofs = chrBmp->height - fHeight; - width = chrBmp->width; - k = 0; - for (i=0;i>3; - for (j=0;j> 3; - //Have we data for the bitmap ?. If not, output a blank line. - if (ofs >=0) - bitSet = chrBmp->bitmap[ofs*nbytes+ofsj]&(0x80>>shiftj); - else - bitSet = 0; - - if (bitSet) - col = fCol; - else - col = bCol; - if (col!=TRANSPARENT_32BIT_COLOUR) - { - if (!hChar) - scrPoint(k+x,i+y,col); - else - { - scrPoint(k+x,i*2+y,col); - scrPoint(k+x,i*2+1+y,col); - } - if (wChar) - { - if ((j>=1) && (j<=wChar)) - { //for j=1,2,3 - plot 2 pixels - k++; - if (!hChar) - scrPoint(k+x,i+y,col); - else - { - scrPoint(k+x,i*2+y,col); - scrPoint(k+x,i*2+1+y,col); - } - } - } - } - k++; - } - ofs++; - } -} - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : dspl_ScrText | -+--------------------------------------------------------------------+ - - PURPOSE : draw a line of ascii/unicode text - -GW 18/09/01 - Made invert flag local to file not procedure -GW 10/02/03 SPR#1721 Added code to call separate procedure if a border is required. - Removed existing 'border' code. -GW 14/02/03 SPR#1736 - Split code into separate procedures - Modified error display code to output ascii characters of the code if no - matching bitmap is found. -*/ -void dspl_ScrText (int x, int y, char *txt, int style) -{ - int nChar = 0; - int i, j, k; - t_font_bitmap* chrBmp; - t_font_bitmap* errBmp[2] = {NULL,NULL}; - int str1, str2; - int border = 0; - int shadow = 0; - int fHeight; - int wChar,hChar,shadowHt; - unsigned int fCol,bCol,borderCol,shadowCol,fColconv,bColconv; - unsigned int col; - int startX; - USHORT code; - - startX = x; - shadowCol = 0; - borderCol = 0; - border = dspl_getBorderWidth(); - //default to wide chars (for the moment) - if (style & TXT_STYLE_WIDECHAR) - wChar = 3; - else - wChar = 0; - if (style & TXT_STYLE_HIGHCHAR) - hChar = 1; - else - hChar = 0; - - //Set-up default colours - fCol = dspl_GetFgdColour(); - bCol = dspl_GetBgdColour(); - switch (style & TXT_STYLE_MASK) - { - case TXT_STYLE_NORMAL: //Normal - default: - break; - case TXT_STYLE_INVERT: //Invert - fCol = dspl_GetBgdColour(); - bCol = dspl_GetFgdColour(); - break; - case TXT_STYLE_HIGHLIGHT: //highlight - colour background of selected item in differently. - bCol = dspl_GetHighlightColour(); - break; - case TXT_STYLE_BORDER: // 1 pixelborder - if (border==0) - border = 1; - break; - case TXT_STYLE_2PIXEL_BORDER: // 2 pixelborder - if (border==0) - border = 2; - break; - case TXT_STYLE_3PIXEL_BORDER: // 3 pixelborder - if (border==0) - border = 3; - break; - case TXT_STYLE_4PIXEL_BORDER: // 4 pixelborder - if (border==0) - border = 4; - break; - case TXT_STYLE_SHADOW1: //shadow - shadow = 1; - break; - case TXT_STYLE_SHADOW2: //deeper shadow - shadow = 2; - break; - } - - if (fCol==bCol) - { - fCol = 0x00FF0000; - bCol = 0x0000FFFF; - } - if (border) - { - borderCol = dspl_GetBorderColour(); - if (borderCol == fCol) - { //A border colour the same as the text colour - get a contrasting colour - borderCol = dspl_GetContrastColour(fCol); - } - } - else - borderCol = 0; - - if (shadow) - shadowCol = dspl_GetShadowColour(); - else - shadowCol = 0; - - // SH - modified because it doesn't allow text to start off the screen - // GW - allow text to start off-screen but finish if completely off-screen - if (y > scrY) - return; - if (txt ==NULL) - return; - - fHeight = dspl_GetFontHeight(); - if (hChar) - shadowHt = fHeight*2; - else - shadowHt = fHeight; - - //For faster operation - precalculate colours -#ifdef DSAMPLE_COLOUR - if (fCol!=TRANSPARENT_32BIT_COLOUR) - fColconv = DSPL_GET_BITCOLOUR(fCol); - else - fColconv = fCol; - if (bCol!=TRANSPARENT_32BIT_COLOUR) - bColconv = DSPL_GET_BITCOLOUR(bCol); - else - bColconv = bCol; -#endif - code = 0xFFFF; - while ((code !=0) &&(x <= scrX)) - { - nChar++; - /*mc SPR 1319*/ - if (style &TXT_STYLE_UNICODE) - { - str1 = *txt; - str2 = *(txt+1); - code = ((str1<<8)&0xFF00) | (str2&0x00ff); - } - else/*mc end*/ - { - str1 = *txt; - str2 = 0x00; - /*SPR 1508, convert ASCII char to unicode before drawing it*/ - code = translation_ascii_2_unicode[*txt]; - } - if (code != 0) - { - chrBmp = get_bitmap(code); - if (chrBmp == NULL) - { - errBmp[0] = get_bitmap(str1); - errBmp[1] = get_bitmap(str2); - } -#ifdef MMI_TRACE - { - char bfr[40]; - if ((chrBmp==NULL) || (chrBmp->code==0xFFFF)) - { - sprintf(bfr,"Undefined bitmap for 0x%04X",code); - mmi_trace(bfr); - } - } -#endif - } - else //end of string reached - chrBmp =NULL; - if (chrBmp != NULL) - { - if (border) - { - scrCharBorderOutput(chrBmp,fCol,bCol,borderCol,border,x,y); - } -#ifdef DSAMPLE_COLOUR - else if ((!hChar) && (!wChar)) - { //GW 28/11/02 - for speed, don't use 'scrPoint' - //NB Code is only correct for a D-sample - scrFastCharOutput(chrBmp,fColconv,bColconv,x,y); - } -#endif //DSAMPLE_COLOUR - else - { - scrCharOutput(chrBmp,fCol,bCol,x,y,wChar,hChar); - } - x = x + chrBmp->width + wChar; //add 3 for 'wide' chars - //If there is a pixel border between chars at the moment - - x = x+border; - } - else if (code!=0) - { //We have no bitmap - display ascii equivalent - for (i=0;i<2;i++) - { if (errBmp[i]!= NULL) - { - scrCharOutput(errBmp[i],fCol,bCol,x,y,wChar,hChar); - x = x + errBmp[i]->width + wChar; - errBmp[i] = NULL; - } - } - } - /*MC SPR 1319*/ - if (style &TXT_STYLE_UNICODE) - txt+=2; - else - /*mc end*/ - txt++; - } - if (shadow) - { - for (i=0;i scrY) - return; - - - - while ((*txt) && (x + current_width <= scrX)) - { - current_code = (USHORT)((*txt)<<8)+(USHORT)((*txt)>>8);/*The USHORT is inverted, therefore we have to apply this simple change*/ - current_bitmap = get_bitmap(current_code); - if (!current_bitmap) /*ASCII codes will be represented*/ - { - first_byte_code = (USHORT)((*txt)&0xFF); - error_bitmap = get_bitmap(first_byte_code); - if (error_bitmap) - { - dspl_show_bitmap(x,y,error_bitmap,SHOWBITMAP_INVERT); - x += error_bitmap->width; - } - second_byte_code = (USHORT)((*txt)>>8); - error_bitmap = get_bitmap(second_byte_code); - if (error_bitmap) - { - dspl_show_bitmap(x,y,error_bitmap,SHOWBITMAP_INVERT); - x += error_bitmap->width; - } - - } - else - { - dspl_show_bitmap(x,y,current_bitmap,SHOWBITMAP_INVERT); - x += current_bitmap->width; - } - txt++; - } - -} - - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrText_Invert | -+--------------------------------------------------------------------+ - - PURPOSE : draw text inverted - -*/ - -void scrText_Invert (int x, int y, char *txt) -{ - //Display inverted text - dspl_ScrText (x,y, txt, TXT_STYLE_INVERT); -} - - -EXTERN UBYTE dspl_str_length(char * str) -{ - UBYTE count=0; - USHORT* current; - - if (dspl_get_char_type() == DSPL_TYPE_ASCII) - return (strlen(str)); - else - { - current = (USHORT*) str; - while (*current) - { - count++; - current++; - } - return count; - } -} - - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrLine | -+--------------------------------------------------------------------+ - - PURPOSE : draw line - -*/ - -void scrLine (int x1, int y1, int x2, int y2) -{ - int x, y, dx, dy, c1, c2, err, swap = 0; - U32 fCol; - - if (x1 < 0 || x1 >= scrX || x2 < 0 || x2 >= scrX || - y1 < 0 || y1 >= scrY || y2 < 0 || y2 >= scrY) - return; - fCol = dspl_GetFgdColour(); - dx = x2 - x1; dy = y2 - y1; - if (((dx < 0) ? -dx : dx) < ((dy < 0) ? -dy : dy)) - { - swap = 1; /* take the long way */ - x = x1; x1 = y1; y1 = x; - x = x2; x2 = y2; y2 = x; - } - if (x1 > x2) - { - x = x1; x1 = x2; x2 = x; /* always move to the right */ - y = y1; y1 = y2; y2 = y; - } - - dx = x2 - x1; dy = y2 - y1; - c1 = dy * 2; dy = 1; - if (c1 < 0) - { - c1 = -c1; - dy = -1; - } - err = c1 - dx; c2 = err - dx; - x = x1; y = y1; - while (x <= x2) - { - scrPoint(swap?y:x,swap?x:y,fCol); - x++; - if (err < 0) - err += c1; - else - { - y += dy; - err += c2; - } - } - - if (internal) - return; -} - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrRect | -+--------------------------------------------------------------------+ - - PURPOSE : draw rectangle - -*/ - -void scrRect (int px, int py, int sx, int sy) -{ - internal = 1; - scrLine(px,py,px+sx,py); - scrLine(px,py+sy,px+sx,py+sy); - scrLine(px,py,px,py+sy); - internal = 0; - scrLine(px+sx,py,px+sx,py+sy); -} - - - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrFntSelect | -+--------------------------------------------------------------------+ - - PURPOSE : select the current font - -*/ - -int scrFntSelect (int font) -{ - return 1; /* always OK */ -} - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrFntHeight | -+--------------------------------------------------------------------+ - - PURPOSE : get height of current font - -*/ - -int scrFntHeight (void) -{ -#ifdef LSCREEN - return 16; -#endif - - if (dspl_char_type == DSPL_TYPE_ASCII) - return 8; - else - return 12; -} - - - -//Really get information about -// (1) how many chars we can have on a line -// (2) how many pixels are in a string -//GW SPR#1721 - Include a border in the calculations -int scrGetRealLength(char *str, int* totChar, int* totPixel) -{ - int nChar=0; - int nPixel=0; - int maxChar,maxPixel; - t_font_bitmap* bmp; - int strEnd; - USHORT str16,str1,str2; - UBYTE current_display_char_type = dspl_char_type;/*mc SPR 1319*/ - int border; - - //Calculate extra pixels allowed for the border - border = dspl_getBorderWidth(); - - if (*totChar<=0) //assume full str required. - maxChar = 256; //stop after 256 chars - else - maxChar = *totChar; //stop after 256 chars - if (*totPixel<=0)// assume no limit to len - limit at 2x screen - maxPixel = 2*scrX; - else - maxPixel = *totPixel; - strEnd = FALSE; - /*MC SPR 1319, char type is unicode if unicode tag*/ - if(str[0] == 0x80) - { current_display_char_type = DSPL_TYPE_UNICODE; - str+=2; /*ignore first char SPR 1442*/ - nChar+=2;/*MC*/ - } - else /*SPR 1526, assume if no unicode tag, we're in ASCII*/ - current_display_char_type = DSPL_TYPE_ASCII; - /*MC 1526, end*/ - while (!strEnd) - { - if (current_display_char_type == DSPL_TYPE_ASCII) - { - str16 = *str; - str++; - } - else - { - str1 = *str; - str++; - str2 = *str; - str++; - str16 = ((str1 << 8) & 0xFF00) + (str2 & 0x00FF);/*MC, fixed bitmask 1319*/ - - } - if (str16 == 0) - { //reached end of string. - strEnd = TRUE; - bmp = NULL; - } - else - bmp = get_bitmap(str16); - if (bmp!= NULL) - { - if (nPixel +bmp->width < maxPixel) - { - nPixel = nPixel + bmp->width+border; - if (current_display_char_type == DSPL_TYPE_ASCII) - nChar++; - else - nChar+=2; - if (nChar >= maxChar) - strEnd = TRUE; - } - else - strEnd=TRUE; - } - } - *totChar = nChar; - *totPixel = nPixel; - - return (nPixel); -} - - - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrFntGetFit | -+--------------------------------------------------------------------+ - - PURPOSE : number of string chars that fit into the line - -*/ - - -int scrFntGetFit (char *tp, int lineWidth) -{ - int totChar = 0; - -// scrGetRealLength(tp, &totChar, &lineWidth); -// return (totChar); - - - if (dspl_char_type == DSPL_TYPE_ASCII) - return (lineWidth /6); - else - return (lineWidth / 12); -} - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrFntGetLen | -+--------------------------------------------------------------------+ - - PURPOSE : number of pixel used by first n string chars - -*/ - - - - -int scrFntGetLen(char *tp, int nChars) -{ - int lineWidth = 0; - - - int count=0; - - if (dspl_char_type == DSPL_TYPE_ASCII) - return (nChars * 6); - else - { - USHORT* temp = (USHORT*)tp; - - while (*temp) - { - UBYTE first_byte = (UBYTE)(*temp); - if (first_byte) - count+=12; - else - count+=6; - temp++; - } - return count; - } -} - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrBmpDraw | -+--------------------------------------------------------------------+ - - PURPOSE : draw bitmap - -*/ - -int scrBmpDraw (int px, int py, int sx, int sy, - int ix, char *bm, int mode) -{ - int i, j; - unsigned char m; - - if (px < 0 || px >= scrX || py < 0 || py >= scrY - || sx < 0 || sy < 0) - return 0; - if (px + sx > scrX) - sx = scrX - px; - if (py + sy > scrY) - sy = scrY - py; - - m = 0x80; - bm += (sx * sy * ix) / 8; - for (j = 0; j < sy; j++) - { - for (i = 0; i < sx; i++) - { - scrPoint(px+i,py+j,*bm & m); - m >>= 1; - if (!m) - { - m = 0x80; - bm++; - } - } - if (m != 0x80) - { - m = 0x80; - bm++; - } - } - - return 0; -} - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrCurType | -+--------------------------------------------------------------------+ - - PURPOSE : set cursor type (0 = no cursor) - -*/ - -void scrCurType (int type) -{ -} - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrCursor | -+--------------------------------------------------------------------+ - - PURPOSE : set cursor at specified position - -*/ - -void scrCursor (int x, int y) -{ - scrLine(x,y+7,x+5,y+7); -} - - -/* -+--------------------------------------------------------------------+ -| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | -| STATE : code ROUTINE : scrPoint | -+--------------------------------------------------------------------+ - - PURPOSE : draw point - -*/ - -//Return colour of pixel at point (px,py) or zero if not on screen. -static int getScrPoint (int px, int py) -{ -#ifdef BSAMPLE - unsigned char m = 0x80; -#endif //BSAMPLE -#ifdef CSAMPLE - U32 m2; -#endif //CSAMPLE - int x1,y1; - int lWord; // index for colour word - U32 opWord; //olour word - U32 op_col; - U32 picCol; - - if (px < 0 || py < 0 || px >= scrX || py >= scrY) - return (0); - -#ifdef BSAMPLE - m >>= px & 7; // mask - px >>= 3; // x offset - if (displayScr[py][px] & m) - return (0x00FFFFFF); - else - return (0x00000000); - -#endif //BSAMPLE - -#ifdef CSAMPLE - //Display plots data from Right to Left - // - reverse x-coordinate - //Also display seems to be 16 pixels down the screen - - //plot points at y=(y-16) mod 64 - x1 = (scrX-1)-px; - y1 = (py+48) & 63; //(py-16) ; - //Display is in columns for TI drivers - m2 = 0x80000000; - m2 = m2 >> (y1 & 31); //shift m2 by 0-31 - y1 = y1 >> 5; // 32bits/word - return (picture_bw[lWord] & m2); -#endif //CSAMPLE - -#ifdef DSAMPLE_COLOUR - //i/p colour is 32 bit - reduce to 16 - x1 = px; - y1 = py; - lWord = y1*LCD_ROW_NUM_LWORDS + x1; - //GW invert pic bits - opWord = ~picture_col[lWord]; - - //Change from 16(8) bits to 32(24) bits -#ifdef DSAMPLE_COLOUR32 - opWord = opWord & 0x0000FFFF; -#endif //DSAMPLE_COLOUR32 -#ifdef DSAMPLE_COLOUR16 -#ifdef PIXEL_0_IN_LSW - if (lWord & 0x01) - opWord = ((opWord >>16) & 0x0000FFFF); - else - opWord = ((opWord ) & 0x0000FFFF); -#else - if (lWord & 0x01) - opWord = ((opWord ) & 0x0000FFFF); - else - opWord = ((opWord >>16) & 0x0000FFFF); -#endif -#endif //DSAMPLE_COLOUR16 - return(DSPL_GET_PIXELCOLOUR(opWord)); -#endif //DSAMPLE_COLOUR - -#ifdef DSAMPLE_LITE - //i/p colour is 32 bit - reduce to 16 - { - int xmask; - x1 = px; - y1 = py; - lWord = DSPL_GET_LWORD(x1,y1); //y1*LCD_ROW_NUM_LWORDS + x1 >> 5; - xmask = 0x01 << (x1 & 0x1F); - //GW invert pic bits - if (picture_bw[lWord] & xmask) - opWord = 0x00FFFFFF; - else - opWord = 0x00000000; - //Change from 16(8) bits to 32(24) bits - } - return (opWord); -#endif //DSAMPLE_LITE - -} - - -static int checkPixelColour(int px, int py, U32 col) -{ - U32 currCol; - - currCol = getScrPoint (px, py); - if ((currCol & 0x00F8FCF8) == (col & 0x00F8FCF8))//16bit colour - return (1); //colours match - else - return (0); //colours are different -} - -unsigned int translucence(unsigned int ipCol,unsigned int picCol) -{ - int trans1,trans2; - U32 col_red1,col_green1,col_blue1; - U32 col_red2,col_green2,col_blue2; - U32 rmerge,gmerge,bmerge; - U32 opCol; - - //0xFF=transparent (col=picCol) - //0x00=solid (col=ipCol) - trans1 = (ipCol >>24) & 0xFF; - trans2 = 255-trans1; - if (trans1 == 0x00) - return (ipCol); - else if (trans1 == 0xFF) - return (picCol); - - //Read in colour from 24 bits - col_red1 = (ipCol & 0x00FF0000) >> 8; - col_green1 = (ipCol & 0x0000FF00) >> 8; - col_blue1 = (ipCol & 0x000000FF); - - //Read in colour from 8 bits - col_red2 = (picCol & 0x00FF0000) >> 8; - col_green2 = (picCol & 0x0000FF00) >> 8; - col_blue2 = (picCol & 0x000000FF); - //red = 0x0000xx00, green = 0x000000xx, blue = 0x000000xx (256x higher than it should be) - - //Round values up -// rmerge = (col_red1 *trans1+col_red2 *trans2+0x0FFFF) & 0x00FF0000; -// gmerge = (col_green1*trans1+col_green2*trans2+0x000FF) & 0x0000FF00; -// bmerge =((col_blue1 *trans1+col_blue2 *trans2+0x000FF) >> 8)& 0x000000FF; - rmerge = (col_red1 *trans2+col_red2 *trans1+0x1F0000) & 0x00FF0000; - gmerge = (col_green1*trans2+col_green2*trans1+0x001000) & 0x0000FF00; - bmerge =((col_blue1 *trans2+col_blue2 *trans1+0x001000) >> 8)& 0x000000FF; - - opCol = rmerge|gmerge|bmerge; - return (opCol); -} - - -#ifdef BSAMPLE -static void scrPoint (int px, int py, int col) -{ - unsigned char m = 0x80; - - //GW Do not plot if outside of the defined window - if (px < win_x1 || py < win_y1 || px >= win_x2 || py >= win_y2) - return; - - m >>= px & 7; // mask - px >>= 3; // x offset - - if (col) - displayScr[py][px] |= m; - else - displayScr[py][px] &= (UBYTE) ~m; -} -#endif //BSAMPLE - -#ifdef CSAMPLE -static void scrPoint (int px, int py, int col) -{ - U32 m2; - int x1,y1; - int lWord; // index for colour word - if (px < win_x1 || py < win_y1 || px >= win_x2 || py >= win_y2) - return; - //Display plots data from Right to Left - // - reverse x-coordinate - //Also display seems to be 16 pixels down the screen - - //plot points at y=(y-16) mod 64 - x1 = (scrX-1)-px; - y1 = (py+48) & 63; //(py-16) ; - //Display is in columns for TI drivers - m2 = 0x80000000; - m2 = m2 >> (y1 & 31); //shift m2 by 0-31 - y1 = y1 >> 5; // 32bits/word - lWord = x1*LCD_COL_NUM_LWORDS+y1; - if (col) - picture_bw[lWord] |= m2; - else - picture_bw[lWord] &= (U32)(~m2); -} -#endif //CSAMPLE - -#ifdef DSAMPLE_COLOUR -void scrPoint (int px, int py, int col) -{ - int lWord; // index for colour word - U32 bitCol; - //i/p colour is 32 bit - if (px < win_x1 || py < win_y1 || px >= win_x2 || py >= win_y2) - return; - lWord = DSPL_GET_LWORD(px,py); - bitCol = DSPL_GET_BITCOLOUR(col); - DSPL_SET_BITCOLOUR(px,lWord,bitCol,"plot"); -} -#endif //DSAMPLE_COLOUR - -#ifdef DSAMPLE_LITE -void scrPoint (int px, int py, int col) -{ - int m_px; - int word ; - //i/p colour is 32 bit - if (px < win_x1 || py < win_y1 || px >= win_x2 || py >= win_y2) - return; - - m_px = 1 << (px & 0x1F); - word = DSPL_GET_LWORD(px,py); - if (col) - picture_bw[word] = picture_bw[word] | m_px; - else - picture_bw[word] = picture_bw[word] & (~m_px); -} -#endif //DSAMPLE_LITE - - - -/******************************************************************* - * * - * PART III: LCD Simulation for Windows * - * * - *******************************************************************/ -#if defined (WIN32) - -#define LCDE_COL 20 -#define LCDE_ROW 4 -static int screensize_x = 16; -static int screensize_y = 4; - -#define NULL_TERM '\0' /* string termination */ - -static CHAR lcd_screen [LCDE_ROW+2][LCDE_COL+3]; -static CHAR cursor_line[LCDE_COL+3]; - -static int lcd_cursX, lcd_cursY, lcd_enabled = FALSE; - -LOCAL void LCD_Refresh (void) -{ - int i; - CHAR buf[100]; - - for (i=0; i screensize_x) - { - /* clip the string */ - s[(len = screensize_x-col)] = NULL_TERM; - } - memcpy (&lcd_screen[row+1][col+1], s, len); - LCD_Refresh (); - } - } -} - -GLOBAL void LCD_Cursor (int row, int col) -{ - if (lcd_enabled) - { - if (row < screensize_y AND col < screensize_x) - { - lcd_cursY = row; - lcd_cursX = col; - LCD_Refresh (); - } - } -} - -GLOBAL void LCD_SetPower (void) -{ -} - -GLOBAL void LCD_PixBlt (int x, int y, int w, int h, char *bmp) -{ -} - -/* - * Stimulation of the lcd driver - */ -GLOBAL void lcd_test (UBYTE mode) -{ - TRACE_EVENT ("Display Redirection activated"); - mtkEnabled = mode; - scrInit(); - if (mtkEnabled EQ 2) - { - scrY = 64; - } -} -#endif /* WIN32 */ - -//Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg -//New function added to control the refreshing of the LCD -/******************************************************************************* - - $Function: dspl_refresh - $Description: controls the refresh of the LCD from MMI - $Returns: the current status of refresh - $Arguments: State - indicating the state to be set to. - -*******************************************************************************/ -int dspl_control(int state) -{ - // Nov 04, 2005 DR: OMAPS00052595 -#ifndef _SIMULATION_ - - -#ifdef FF_MMI_NEW_LCD_API_MIG - static BOOL refresh_status = DSPL_ACCESS_ENABLE; - T_LCD_REFCONTROL status; - TRACE_EVENT_P1("dspl_referesh() - state =>%d",state); - - - if(state == refresh_status) - return refresh_status; -// Nov 02, 2005 DR: OMAPS00051051 - xpradipg -// Check for the state is made before the assignment - if( state != DSPL_ACCESS_QUERY) - refresh_status = state; -#endif - - switch(state) - { - case DSPL_ACCESS_DISABLE: -#ifdef FF_MMI_NEW_LCD_API_MIG - status = REF_DISABLED; - TRACE_EVENT("calling lcd_control with disable lcd"); - lcd_control(DISPLAY_MAIN_LCD,LCD_REFCONTROL, (void *)&status); - return refresh_status; -#endif - case DSPL_ACCESS_ENABLE: -#ifdef FF_MMI_NEW_LCD_API_MIG - status = REF_ENABLED; - TRACE_EVENT("calling lcd_control with disable lcd"); - lcd_control(DISPLAY_MAIN_LCD,LCD_REFCONTROL, (void *)&status); -#else - r2d_g_refresh_disabled = state; -#endif - case DSPL_ACCESS_QUERY: - default: -#ifdef FF_MMI_NEW_LCD_API_MIG - return refresh_status; -#else - return r2d_g_refresh_disabled; -#endif - } -#else - return 0; -#endif - -} - -#endif /* MMI != 0 */ +/* ++----------------------------------------------------------------------------- +| Project : +| Modul : display.c ++----------------------------------------------------------------------------- +| Copyright 2002 Texas Instruments Berlin, AG +| All rights reserved. +| +| This file is confidential and a trade secret of Texas +| Instruments Berlin, AG +| The receipt of or possession of this file does not convey +| any rights to reproduce or disclose its contents or to +| manufacture, use, or sell anything it may describe, in +| whole, or in part, without the specific written consent of +| Texas Instruments Berlin, AG. ++----------------------------------------------------------------------------- +| Purpose : ++----------------------------------------------------------------------------- +*/ +/* + Nov 04, 2005 DR: OMAPS00052595 + Description: Simulation build fails for Locosto + Solution : This function is not being used for the simulation build hence + the contents of the same are put under the compiler flag #ifndef WIN32 + + + Nov 02, 2005 DR: OMAPS00051051 - xpradipg + Description:The display is cluttered when the camera is in the viewfinder + mode for a long time + Solution: The check for requested state and current state is moved before + the assignment of the current state with the requested state. + + Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg + Description: Locosto: MIgration to New LCD APIs + Solution: Migrated to New APIs by replacing the old driver APIs with + corresponding New LCD APIs + xrashmic 22 Aug, 2004 MMI-SPR-32798 + Adding the support for screen capture using a dynamically assigned key. + + July 1, 2005 REF: CRR 32677 - xpradipg + Description: Alignmnet of the display for each row. Send the un negated value to LCD driver + Solution: The alignment of the display is corrected by decreasing the number of columns by 1. + The negated value is corrected and sent to the driver + + June 03, 2005 REF: GSM-ENH-31636 xpradipg + Description: Change the board ID for Isample to 71 and add new defination + for the CALLISTO with baord ID 70 + Solution: Add the definition of ALLISTO with board ID 70 and change the + board Id to 71 for Isample + + Mar 30, 2005 REF: CRR 29986 xpradipg + Description: Optimisation 1: Removal of unused variables and dynamically + allocate/ deallocate mbndata + Solution: removed the unused variable pictureCopy_col and the static + qualifier so as to be accessed by the ATB module + + + CRR 28825: xpradipg - 11 Feb 2005 + Description:Extension of GDI-for display of ISample and code cleanup + Solution: The code replication for D_Sample and E_sample are removed and a + new flag is added for the ISample. currently the BOARD ID is set to 70 for + CALLISTO and 71 for ISample. + +GW 31/01/03 - Added support for 16 bit LCD buffer - + Split DSAMPLE_COLOUR code into DSAMPLE_COLOUR32 (original 32bits/pixel) + and DSAMPLE_COLOUR16 (16 bits/pixel - untested) + Removed CSAMPLE_COLOUR option + Removed 'PLOT' option for D-sample - too slow to be useful + +*/ + +#ifndef DRV_DSPL_C +#define DRV_DSPL_C +#endif + +/*==== INCLUDES ===================================================*/ +#define ENTITY_CST + +#include +#if defined (WIN32) +#include +#endif + +#include "typedefs.h" +#include "gdi.h" +#include "dspl.h" +#include "font_bitmaps.h" +#include "vsi.h" +#include "custom.h" +#include "gsm.h" +#include "prim.h" +#include "p_mmi.h" +#include "tok.h" +#include "cst/cst.h" +#include "os.h" + +#include "rvf/rvf_api.h" + +#undef R2D_ENABLED +#ifndef _SIMULATION_ + +#if (defined(_TARGET_) && (BOARD!=10) && (BOARD!=34)&& (BOARD!=35)&& (BOARD!=46) && (BOARD !=70) && (BOARD != 71)) +/* + * R2D is not supported by EP2 module (BOARD == 10, of customer 6351/36) + * and by Avenger2/Perseus1 board (BOARD == 34). (dbachran / 2002-11-27) + * and by P2 board (BOARD == 35) and F-sample (BOARD == 46) (rsauer / 2004-05-27) + */ +#define R2D_ENABLED +#endif +#endif +#ifdef FF_MMI_NEW_LCD_API_MIG +#include "lcd_manager.h" +#endif +#ifndef _SIMULATION_ + #ifdef R2D_ENABLED + #include "r2d/r2d.h" + #include "r2d/r2d_config.h" + #endif +#endif +/* GW enable/disable trace using the MMI */ +/* NB. Traces are only for diagnostics while developing and must be removed for code deliveries!*/ +/* defining mmi_trace as will remove them */ +//#define MMI_TRACE +#define mmi_trace +//void mmi_trace(char* str); +/*==== EXPORT =====================================================*/ +#define ENCODE_OFFSET 24 +//define EASY_TEXT_ENABLED + +/************************************************************************ +* The following macros define what hardware we are running on and what * +* drivers are being used to drive the display * +* BSAMPLE - 84x48 display * +* CSAMPLE - 84x48 display * +* CSAMPLE_COLOUR - no longer supported * +* DSAMPLE - 176x220 display which can be driven as 16 bit colour or b+w * +* DSAMPLE_COLOUR - colour display * +* DSAMPLE_COLOUR16 - 16 bits per pixel displayed * +* NB. This has not been tested at all - it * +* may not display correctly or may crash * +* although it does not crash when enabled * +* with the 32bit drivers) * +* * +* DSAMPLE_COLOUR32 - 32 bits per pixel displayed (16 bits are * +* zero and have no effect) * +* DSAMPLE_LITE - 1 bit per pixel (b+w display) * +* GW SPR#1840 25/03/03 * +* Also, the compiler switches have been added to allow us to develop * +* the MMI for a different final format (b+w/smaller display). * +* COLOURDISPLAY - If not defined - all output is to be b+w * +* LSCREEN - If not defined - screen is 'small' - use the 8x6 font * +*************************************************************************/ +#if (defined(_TARGET_)) +//#if (BOARD==33) +#if ((BOARD == 8) || (BOARD == 9)) +#define CSAMPLE +#elif ((BOARD == 40) || (BOARD == 41)) +#define DSAMPLE +#elif (BOARD == 43) +#define ESAMPLE +//June 03, 2005 REF: GSM-ENH-31636 xpradipg +#elif (BOARD == 70) +#define CALLISTO +//CRR 28825: xpradipg - 11 Feb 2005 +#elif (BOARD == 71) // LCD enabling of ISAMPLE +#define ISAMPLE +#else +//Other board type +#define BSAMPLE +#endif +#else +//_TARGET_ not defined +//Not running on hardware - select the hw for simulation purposes. +#define BSAMPLE + +//Also, if not already disabled - disable trace code +#ifdef MMI_TRACE +#undef MMI_TRACE +#endif +#endif +//June 03, 2005 REF: GSM-ENH-31636 xpradipg +//CRR 28825: xpradipg - 11 Feb 2005 +#if (defined(DSAMPLE) || defined(ESAMPLE) || defined(ISAMPLE) || defined(CALLISTO)) + /* For a start, we use exactly the same definitions for E-Sample as we do + for D-Sample. IMPORTANT: If the E-Sample LCD differs from D-Sample, the + following lines must be properly adapted! + */ + #if (R2D_LCD_DISPLAY == R2D_COLOR) + #define DSAMPLE_COLOUR + #if (R2D_PIXEL_POS_TO_BIT_POS == 5) + #define DSAMPLE_COLOUR32 + #endif + #if (R2D_PIXEL_POS_TO_BIT_POS == 4) + #define DSAMPLE_COLOUR16 + #endif + #else + #define DSAMPLE_LITE + #undef COLOURDISPLAY + #endif +#endif /* ESAMPLE */ + +#ifdef FF_MMI_NEW_LCD_API_MIG + #define DSAMPLE_COLOUR + #if ( LCD_PIXEL_FORMAT == RGB565) + #define DSAMPLE_COLOUR16 + #endif +#endif +//Ensure that if the H/W does not support colour, the compiler option is overridden +//- we can display b+w only on a colour display but not the other way round +#ifndef DSAMPLE_COLOUR +#ifdef COLOURDISPLAY +#undef COLOURDISPLAY +#endif +#endif + + +/* +USE_PLOT - Defined if we are to use r2d_draw_point to output a display + This method will always produce a display (of sorts) but can be very slow +USE_BLIT_RECT - Defined if we provide a 24 bit colour display and allow the riviera code to + translate into the LCD format. +USE_BUFFER - This must be defined if USE_BLIT_RECT is being used. This will require an image + of the colour display to be stored in local memory. + +If neither are defined then we must create our buffer in the same format as the LCD. +NB if 'USE_BLIT_RECT' is not defined, any changes to the h/w or driver software will have an +impact on the code below. + +*/ + +/*==== CONSTANTS ==================================================*/ +// Mar 30, 2005 REF: CRR 29986 xpradipg +// removed the static qualifier to be accessed by the ATB module. +#ifdef FF_MMI_OPTIM +const int translation_ascii_2_unicode[256] = { +#else +static const int translation_ascii_2_unicode[256] = { +#endif + 0x0000, 0x00A4, 0x00d8, 0xFFFF, 0x0394, 0x03A8, 0x00BF, 0x00F8, 0xFFFF, 0xFFFF, 0x000A, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, + 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, + 0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026,0x0027, 0x0028, 0x0029, 0x002A, 0x002B, 0x002C, 0x002D, 0x002E, 0x002F, + 0x0030, 0x0031, 0x0032, 0x0033, 0x0034, 0x0035, 0x0036, 0x0037, 0x0038, 0x0039, 0x003A, 0x003B, 0x003C, 0x003D, 0x003E, 0x003F, + 0x0040,0x0041, 0x0042, 0x0043, 0x0044, 0x0045, 0x0046, 0x0047, 0x0048, 0x0049, 0x004A, 0x004B, 0x004C, 0x004D, 0x004E, 0x004F, + 0x0050, 0x0051, 0x0052, 0x0053, 0x0054, 0x0055, 0x0056, 0x0057, 0x0058, 0x0059, 0x005A, 0x005B, 0x005C, 0x005D, 0x005E, 0x005F, /* SPR#2034 - SH */ + 0xFFFF, 0x0061, 0x0062, 0x0063, 0x0064, 0x0065, 0x0066, 0x0067, 0x0068, 0x0069, 0x006A, 0x006B, 0x006C, 0x006D, 0x006E, 0x006F, + 0x0070, 0x0071, 0x0072, 0x0073, 0x0074, 0x0075, 0x0076, 0x0077, 0x0078, 0x0079, 0x007A, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, + + 0xFFFF, 0x00C7, 0x00FC, 0x00E9, 0x00E4, 0x00E0, 0x00E5, 0xFFFF, 0xFFFF, 0xFFFF, 0x00E8, 0xFFFF, 0xFFFF, 0x00EC, 0x00C4, 0x00C5, + 0x00C9, 0x00E6, 0x00C6, 0xFFFF, 0x00F6, 0x00F2, 0xFFFF, 0x00F9, 0xFFFF, 0x00D6, 0x00DC, 0xFFFF, 0x00A3, 0x00A5, 0xFFFF, 0xFFFF, + 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x00F1, 0x00D1, 0xFFFF, 0xFFFF, 0x00A7, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x00A1, 0xFFFF, 0xFFFF, + 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, + 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, + 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, + 0xFFFF, 0x00DF, 0x0393, 0x03A0, 0x03A3, 0xFFFF, 0xFFFF, 0xFFFF, 0x03A6, 0x0398, 0x03A9, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x039B, + 0x039E, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF + + }; +/*==== VARIABLES ==================================================*/ +//EXTERN UBYTE extDisplay; /* external display ? */ +EXTERN UBYTE extDisplay; /* external display ? */ +GLOBAL UBYTE dspl_char_type; + +/* + * We don't need display.c with ACI-only builds, but CST references extDisplay + * above, so we need to keep that one for now. + * Only process this file, if MMI is set to 1 (SMI) or 2 (BMI). + */ +#if (MMI != 0) + +GLOBAL dspl_DevCaps displayData; +#if defined (NEW_FRAME) +EXTERN T_HANDLE hCommL1; +#else +EXTERN T_VSI_CHANDLE hCommL1; +#endif + +static int scrEnabled = 0; /* screen update enable */ +static int txtInvert = 0; //Text invert + +static T_HANDLE mmi_handle; +static T_HANDLE hCommMMI = VSI_ERROR; + +/*==== FUNCTIONS ==================================================*/ +/* + * send to external Display + */ +LOCAL void dspl_SendDisplayReq (USHORT x, USHORT y, char *text); +GLOBAL void kbd_test (UBYTE key); + +/* + * TI driver functions + */ +extern void LCD_SetPower (void); +extern void LCD_Reset (void); +extern void LCD_Enable (int); +extern void LCD_Clear (void); +extern void LCD_WriteString (int y, int x, char *s); +extern void LCD_PixBlt (int x, int y, int w, int h, char *bmp); +extern void LCD_DrawIcon (int x, int y, char id); +extern void LCD_TranslateBitmap (int w, int h, char *bo, char *bt); +extern void LCD_Cursor (int row, int col); + +GLOBAL void rt_ExtPrimitive ( USHORT TaskHandle, USHORT DestComHandle, + char *ExtDest, OS_QDATA *Msg ); +/* + * Internal Functions for Graphic Driver (Workaround) + */ +LOCAL void scrInit (void); +LOCAL void scrExit (void); +LOCAL void scrSize (int *x, int *y); +#if (!CUST)//JVJE #if (CUST==1) + +LOCAL void scrClear (void); +#endif +LOCAL void scrClearRect (int px, int py, int sx, int sy); +LOCAL void scrText (int x, int y, char *txt); +LOCAL void scrText_Unicode (int x, int y, USHORT *txt); +LOCAL void scrLine (int px, int py, int sx, int sy); +LOCAL void scrRect (int px, int py, int sx, int sy); +LOCAL int scrFntSelect (int font); +LOCAL int scrFntHeight (void); +LOCAL int scrFntGetFit (char *tp, int lineWidth); +LOCAL int scrFntGetLen (char *tp, int nChars); +LOCAL int scrBmpDraw (int px, int py, int sx, int sy, + int ix, char *bm, int mode); +LOCAL void scrCurType (int type); +LOCAL void scrCursor (int x, int y); +//accessible from outside e.g 3th application MMS +void scrPoint (int px, int py, int col); +LOCAL int scrUpdate (int onOff); + +LOCAL void scrText_Invert_Unicode (int x, int y, USHORT *txt); /*kk*/ + +LOCAL int checkPixelColour(int px, int py, U32 col); +LOCAL void scrLCDUpdate (void); + +void scrText_Invert (int x, int y, char *txt); + +void scrDrawFilledRect (int px, int py, int sx, int sy, U32 col); + +int scrGetRealLength(char *str, int* totChar, int* totPixel); + +LOCAL void scrUnfocusDisplay(void); + + + + +void dspl_show_bitmap(int x, int y,t_font_bitmap* current_bitmap,U32 attr ); + + + + +GLOBAL UBYTE dspl_SetWindow(USHORT in_X1, + USHORT in_Y1, + USHORT in_X2, + USHORT in_Y2); + + + + + + + +/*==== CONSTANTS ==================================================*/ + +/******************************************************************* + * * + * PART I: Driver Interface * + * * + *******************************************************************/ + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_Init | ++--------------------------------------------------------------------+ + + PURPOSE : The function initializes the driver´s internal data. The + function returns DRV_INITIALIZED if the driver has already + been initialized and is ready to be used or already in use. + In case of an initialization failure, which means that the + driver cannot be used, the function returns DRV_INITFAILURE. + +*/ + +GLOBAL UBYTE dspl_Init (void) +{ + /* + * Default is character Display + */ + displayData.DisplayType = DSPL_TYPE_CHARACTER; + + if (!extDisplay) /* use internal display */ + { +#if defined (SIMULATE_LCD) + LCD_Reset (); /* use character oriented display */ + LCD_Enable (1); + LCD_Clear (); + scrInit(); /* we need this also for glob vars, kk 14.02.2000*/ +#else + scrInit(); /* use graphic display */ +#endif + } + else +#if defined (SIMULATE_LCD) + LCD_Enable (0); +#else + scrExit(); +#endif + + return DRV_OK; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_Exit | ++--------------------------------------------------------------------+ + + PURPOSE : The function is called when the driver functionality is + not longer needed. The function "de-allocates" all + allocated resources and finalizes the driver. + +*/ + +GLOBAL void dspl_Exit (void) +{ + scrExit(); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_Clear | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to clear a specific region of the + display using the current background colour. The region + is specified by the upper left corner (X1, Y1) and the + lower right corner (X2, Y2) inclusive. The background + color can be set using dspl_SetBkgColor () function. + +*/ + +GLOBAL UBYTE dspl_Clear (USHORT in_X1, + USHORT in_Y1, + USHORT in_X2, + USHORT in_Y2) +{ + scrClearRect ((int)in_X1,(int)in_Y1,(int)(in_X2-in_X1+1),(int)(in_Y2-in_Y1+1)); + + return DRV_OK; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_Clear | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to clear a specific region of the + display using the current background colour. The region + is specified by the upper left corner (X1, Y1) and the + lower right corner (X2, Y2) inclusive. The background + color can be set using dspl_SetBkgColor () function. + +*/ + +GLOBAL UBYTE dspl_ClearAll (void) +{ +#if (!CUST) + scrClear (); +#endif + + return DRV_OK; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : SMI_WM | +| STATE : code ROUTINE : dspl_UnfocusDisplay | ++--------------------------------------------------------------------+ + + PURPOSE : Calls the function that will cause the entire display to appear much + darker, allowing the pop-up dialog to be more clearly the focus + especially the softkeys. +GW #2294 23/07/03 - Created +*/ +GLOBAL UBYTE dspl_unfocusDisplay (void) +{ + scrUnfocusDisplay(); + return DRV_OK; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_Enable | ++--------------------------------------------------------------------+ + + PURPOSE : The function is used to turn the display on or off. While + a display is switched off, it is possible to perform any + drawing function. + +*/ + +GLOBAL UBYTE dspl_Enable (UBYTE in_Enable) +{ + return scrUpdate (in_Enable); +} + +/* +xreddymn Apr-07-2005 MMI-SPR-29655: Added function to update region ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_Enable_Region | ++--------------------------------------------------------------------+ + + PURPOSE : The function is used to update a region on the screen + +*/ + +void dspl_Enable_Region(INT16 x1, INT16 y1, INT16 x2, INT16 y2) +{ +#ifdef R2D_ENABLED + r2d_flush_region(x1, y1, x2, y2); +#endif +} + + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_GetDeviceCaps | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to retrieve the capabilities of the + display device including the dimensions of the display and + the logical unit in which the dimensions is measured. + +*/ + +GLOBAL void dspl_GetDeviceCaps (dspl_DevCaps * out_DeviceCapsPtr) +{ + int x,y; + + scrSize (&x, &y); + + out_DeviceCapsPtr->Height = (USHORT)y; + out_DeviceCapsPtr->Width = (USHORT)x; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_SetDeviceCaps | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to set the capabilities of the + display device including the dimensions of the display and + the logical unit in which the dimensions is measured. + +*/ + +GLOBAL void dspl_SetDeviceCaps (dspl_DevCaps * in_DeviceCapsPtr) +{ + displayData.DisplayType = in_DeviceCapsPtr->DisplayType; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_GetIconImage | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to copy the image of a driver + internal icon into an application specific icon buffer. + The icon may modify the icon. In case of a successful + completion the function returns DRV_OK. In case the + size of the buffer where the icon image shall be copied + is too small the driver returns DRV_INVALID_PARAMS. In + case a specific driver implementation does not support + this functionality the driver returns DSPL_FCT_NOTSUPPORTED. + +*/ + +GLOBAL UBYTE dspl_GetIconImage (UBYTE in_Icon, + USHORT in_Size, + UBYTE * out_IconImagePtr) +{ + return DSPL_FCT_NOTSUPPORTED; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_SetCursor | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to change the current cursor settings. + These settings include the type of cursor and the mode + (e.g. static cursor, not flashing). A set of standard + types and modes is defined. + +*/ + +GLOBAL UBYTE dspl_SetCursor (UBYTE in_CursorType, + UBYTE in_CursorMode) +{ + return DRV_OK; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_SetCursorPos | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to set the current cursor position. + If the function succeeds, the cursor is set to the new + position. If one of the values is out of range, the function + returns DRV_INVALID_PARAMS. The number of rows and columns + the display supports can be retrieved using the function + dspl_GetDevCaps(). The upper left corner has the coordinates + 0,0. The values in_X and in_Y are measured in logical units + depending on the capabilities of the device. The means a + graphical display will use pixels. + +GW 05/09/01 Added size x and size y parameters to allow for chinese chars. +*/ + +GLOBAL UBYTE dspl_SetCursorPos (USHORT in_X, + USHORT in_Y, + USHORT in_SizeX, + USHORT in_SizeY + ) +{ + if (displayData.DisplayType EQ DSPL_TYPE_CHARACTER) + { + LCD_Cursor (in_Y, in_X); /* set cursor position */ + if (extDisplay) /* if external display */ + dspl_SendDisplayReq (in_X, in_Y, NULL); + } + else + scrLine(in_X,in_Y+in_SizeY-1,in_X+in_SizeX-1,in_Y+in_SizeY-1); + return DRV_OK; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_ShowCursor | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to change the status of the cursor. + The cursor can be visible or invisible. The function returns + the previous status of the cursor. + +*/ + +GLOBAL UBYTE dspl_ShowCursor (UBYTE in_Show) +{ + return DSPL_CURSOR_VISIBLE; +} + + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_SetBkgColor | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to change the color used for + background painting. If the color is out of range, the + driver returns DRV_INVALID_PARAMS and leaves the color + unchanged. + +*/ + +GLOBAL UBYTE dspl_SetBkgColor (UBYTE in_Color) +{ + return DRV_OK; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_SetFrgColor | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to change the color used for + foreground painting, e.g. text color. If the color is + out of range, the driver returns DRV_INVALID_PARAMS and + leaves the color unchanged. + set a call-back function which + +*/ + +GLOBAL UBYTE dspl_SetFrgColor (UBYTE in_Color) +{ + return DSPL_FCT_NOTSUPPORTED; +} + +enum +{ + COL_TYPE_FGD =0, + COL_TYPE_BGD, + COL_TYPE_HIGHLIGHT, + COL_TYPE_BORDER, + COL_TYPE_SHADOW, + MAX_COL_TYPE +}; +enum +{ + COL_CMD_INIT, + COL_CMD_GET, + COL_CMD_SET, + COL_CMD_SETSHADOW, + COL_CMD_RESTORECOL, + MAX_COL_CMD +}; + +//This definition allows us to have a transparent colour in 256 colour bitmaps. +//We lose the colour nearly-black gray but I don't think it will be missed! +//Better to lose white than gray but will require all icons to be updated! +#define TRANSPARENT_256_COL 0x25 + +//This definition allows us to have a transparent colour in 16bit LCD colour bitmaps. +//We lose almost white R=0xF8 G=0xFC B=0xF8. NB word is inverted +#define TRANSPARENT_16BIT_COL 0x0020 + +//using ARGB format, transparent = 0xFFxxxxxx +#define TRANSPARENT_32BIT_COLOUR 0xFF000000 + +//Hide colours +LOCAL U32 colour_class (int cmd, int colId, U32 inColour) +{ +static U32 g_col[MAX_COL_TYPE]; +static U32 g_colOld[MAX_COL_TYPE]; + switch (cmd) + { + case COL_CMD_INIT: + colour_class(COL_CMD_SET, COL_TYPE_FGD, 0x00404040 ); + colour_class(COL_CMD_SET, COL_TYPE_BGD, 0x00FFFFFF ); //white + colour_class(COL_CMD_SET, COL_TYPE_HIGHLIGHT, 0x00FF00FF ); + colour_class(COL_CMD_SET, COL_TYPE_BORDER, 0x00FFFFFF ); + colour_class(COL_CMD_SET, COL_TYPE_SHADOW, 0x40010101 ); //50% translucency + return (0); + break; + case COL_CMD_SET: + if (inColour != 0) + { + g_colOld[colId] = g_col[colId]; + g_col[colId] = inColour; + } + return(g_colOld[colId]); + break; + case COL_CMD_GET: +#ifdef COLOURDISPLAY +#ifdef DSAMPLE_COLOUR + return(g_col[colId]); +#endif +#else + switch (colId) + { + case COL_TYPE_FGD: return (0x00FFFFFF); + case COL_TYPE_BGD: return (0x00000000); + case COL_TYPE_HIGHLIGHT: return (0x00000000); + case COL_TYPE_BORDER: return (0x00000000); + case COL_TYPE_SHADOW: return (0x00000000); + default: return (0); + } +#endif + break; + case COL_CMD_SETSHADOW: + g_colOld[colId] = g_col[colId];//currently we dont really need to save the old value + // set shadow to 50% black + g_col[colId] = 0x40010101;// | ((inColour >> 2) & 0x003F3F3F); + return(0x40010101); + break; + case COL_CMD_RESTORECOL: + g_col[colId] = g_colOld[colId]; + return (0); + break; + default: + break; + } + return (0); +} + +GLOBAL U32 dspl_SetFgdColour (U32 inColour) { return (colour_class(COL_CMD_SET, COL_TYPE_FGD, inColour)); } +GLOBAL U32 dspl_SetBgdColour (U32 inColour) { return (colour_class(COL_CMD_SET, COL_TYPE_BGD, inColour)); } +GLOBAL U32 dspl_SetHighlightColour (U32 inColour) { return (colour_class(COL_CMD_SET, COL_TYPE_HIGHLIGHT, inColour)); } +GLOBAL U32 dspl_SetBorderColour (U32 inColour) { return (colour_class(COL_CMD_SET, COL_TYPE_BORDER, inColour)); } +GLOBAL U32 dspl_SetShadowColour (U32 inColour) { return (colour_class(COL_CMD_SETSHADOW, COL_TYPE_SHADOW, inColour)); } + +GLOBAL U32 dspl_GetFgdColour ( void ) { return (colour_class(COL_CMD_GET, COL_TYPE_FGD, 0)); } +GLOBAL U32 dspl_GetBgdColour ( void ) { return (colour_class(COL_CMD_GET, COL_TYPE_BGD, 0)); } +GLOBAL U32 dspl_GetHighlightColour ( void ) { return (colour_class(COL_CMD_GET, COL_TYPE_HIGHLIGHT, 0)); } +GLOBAL U32 dspl_GetBorderColour ( void ) { return (colour_class(COL_CMD_GET, COL_TYPE_BORDER, 0)); } +GLOBAL U32 dspl_GetShadowColour (void) { return (colour_class(COL_CMD_GET, COL_TYPE_SHADOW, 0)); } + +GLOBAL void dspl_InitColour (void) +{ + colour_class(COL_CMD_INIT, 0, 0); +} +GLOBAL void dspl_RestoreColour (void) +{ + colour_class(COL_CMD_RESTORECOL, COL_TYPE_FGD, 0); + colour_class(COL_CMD_RESTORECOL, COL_TYPE_BGD, 0); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_DrawIcon | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to draw a driver internal icon. + The origin of the icon is the upper left corner, defined + by the parameters in_X/in_Y. + +*/ + +GLOBAL UBYTE dspl_DrawIcon (UBYTE in_IconID, + USHORT in_X, + USHORT in_Y) +{ + return DSPL_FCT_NOTSUPPORTED; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_DrawLine | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to draw a line from a specific + location defined by the parameters in_X1/in_Y1, to a + specific location defined by the parameters in_X2/in_Y2. + The display´s origin is the upper left corner with the + co-ordinates (0,0). The function uses the current + foreground color, which can be set using the + dspl_SetFrgColor (), to draw the line. + +*/ + +GLOBAL UBYTE dspl_DrawLine (USHORT in_X1, + USHORT in_Y1, + USHORT in_X2, + USHORT in_Y2) +{ + scrLine(in_X1,in_Y1,in_X2,in_Y2); + + return DRV_OK; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_DrawRect | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to draw a rectangle. The upper left + corner of the rectangle is defined by the parameters + in_X1/in_Y1. The lower right corner of the rectangle is + defined by the parameters in_X2/in_Y2. + The display´s origin is the upper left corner with the + co-ordinates (0,0). The function uses the current + foreground color, which can be set using the + dspl_SetFrgColor (), to draw the rectangle. + +*/ + +GLOBAL UBYTE dspl_roundRectFill (int px, + int py, + int sx, + int sy, + int border) +{ + int i,j,col; + col = dspl_GetBgdColour(); + scrDrawFilledRect(px-border,py, sx+border*2,sy, col ); + scrDrawFilledRect(px,py-border, sx,sy+border*2, col ); + + for (i=0;i> 3); //bitmaps are unpacked + bmpPtr = &bmpPtr[bmpSize*in_index]; //for bitmaps that have multiple states + + } + current_bitmap.height = in_Height; + current_bitmap.width = in_Width; + current_bitmap.bitmapSize = 0;// bmpSize; + current_bitmap.bitmap = bmpPtr; + current_bitmap.format = bmpFormat; + dspl_show_bitmap(in_X,in_Y, ¤t_bitmap, attr); + + return DRV_OK; + +} + +GLOBAL UBYTE dspl_BitBlt (USHORT in_X, + USHORT in_Y, + USHORT in_Width, + USHORT in_Height, + USHORT in_Index, + void * in_BmpPtr, + USHORT in_Rop) +{ +#ifdef BSAMPLE +//Use old procedure + scrBmpDraw ((int)in_X, (int) in_Y, (int) in_Width, + (int)in_Height, (int)in_Index, + (char *)in_BmpPtr, (int)in_Rop); + return DRV_OK; +#else + return (dspl_BitBlt2( (short) in_X, (short) in_Y, in_Width, in_Height, in_BmpPtr, in_Index, BMP_FORMAT_BW_UNPACKED)); +#endif + +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_SelectFontbyID | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to select a font used for + displaying text. Text can be displayed using the + functions dspl_TextOut_Cmode. + Driver specific fonts are identified be a font ID + (parameter in_Font). The definition of fonts and font + identifiers is not in scope of G23. Fonts and font + identifiers have to be defined by the customer. The + specific implementation of the display driver and the MMI + using the driver have the knowledge about the available + fonts, their identification and how to use them. + +*/ + +GLOBAL UBYTE dspl_SelectFontbyID (UBYTE in_Font) +{ + return DSPL_FCT_NOTSUPPORTED; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_SelectFontbyImage | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to select a font used for + displaying text. Text can be displayed using the + functions dspl_TextOut_Cmode. + Application specific fonts are identified by the parameter + in_FontPtr, the address of the buffer containing the + application specific font. The structure of the font image + in not in the scope of G23. The structure of the font images + have to be defined by the customer implementing the driver. + +*/ + +GLOBAL UBYTE dspl_SelectFontbyImage (UBYTE * in_FontPtr) +{ + return DSPL_FCT_NOTSUPPORTED; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_GetFontImage | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to copy the image of a font into an + application specific font buffer. The application may modify + the font. In case of a successful completion the function + returns DRV_OK. In case the size of the buffer where the + font image shall be copied to is too small the driver returns + DRV_INVALID_PARAMS. In case a specific driver implementation + does not support this functionality the driver returns + DSPL_FCT_NOTSUPPORTED. + +*/ + +GLOBAL UBYTE dspl_GetFontImage (UBYTE in_Font, + USHORT in_Size, + UBYTE * out_FontPtr) +{ + return DSPL_FCT_NOTSUPPORTED; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_GetFontHeight | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to retrieve the vertical size of + the currently selected font. The function returns the + height measured in logical units depending on the device + capabilities (e.g. pixels or multiple of characters). Call + the function dspl_SelectFont() to select a font. + +*/ + +GLOBAL UBYTE dspl_GetFontHeight (void) +{ + return scrFntHeight(); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_GetTextExtent | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to calculate the size of a 0-terminated + string, to which the parameter in_Text points. The function + returns the size needed to display the text. The value of + the size is measured in units depending on the device + capabilities (e.g. pixels or multiple of characters). Call + the function dspl_SelectFont() to select a font. + +*/ + +GLOBAL USHORT dspl_GetTextExtent_old (char * in_Text, USHORT in_Length) +{ + if (displayData.DisplayType EQ DSPL_TYPE_CHARACTER) + return in_Length; + else + return scrFntGetLen ( in_Text, ( int ) in_Length ); +} + + +GLOBAL USHORT dspl_GetTextExtent (char * in_Text, USHORT in_Length) +{ + int nPixel=0; + int nChar = in_Length; + if (in_Text==NULL) + return(0); + + if (displayData.DisplayType EQ DSPL_TYPE_CHARACTER ) + { + return in_Length; + } + scrGetRealLength(in_Text, &nChar, &nPixel); + + return (nPixel); +} + + + + + +int dspl_GetTextExtent2 (char * in_Text, USHORT in_Length) +{ + return (dspl_GetTextExtent ( in_Text, in_Length)); + +} +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_GetNcharToFit | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to calculate the number of characters of the input + string that will fit into the specified width. + +*/ +/*SPR 1541, added function*/ +//Calculate number of chars that fit in the available space. +GLOBAL USHORT dspl_GetNcharToFit (char * in_Text, USHORT pixelWidth) +{ + int nPixel=pixelWidth; + int nChar= 0; + if (in_Text==NULL) + return(0); + + scrGetRealLength(in_Text, &nChar, &nPixel); + + return (nChar); +} +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_GetMaxTextLen | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to calculate the sub-string + (number of characters) of a 0-terminated string (in_Text) + that can be displayed in the region given by the parameter + in_HSize. The value of in_HSize is measured in logical + units (e.g. pixels or multiple of characters). Call + the function dspl_SelectFont() to select a font. + +*/ + +GLOBAL USHORT dspl_GetMaxTextLen (char * in_Text, + USHORT in_HSize) +{ + if (displayData.DisplayType EQ DSPL_TYPE_CHARACTER) + return strlen (in_Text); + else + return scrFntGetFit ( in_Text, ( int ) in_HSize ); +} + + + + +GLOBAL void dspl_set_char_type(UBYTE char_type){ + dspl_char_type = char_type; +} + +GLOBAL UBYTE dspl_get_char_type(void){ + return dspl_char_type; +} + +int dspl_getDisplayType( void ) +{ +// Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg +#if defined(FF_MMI_NEW_LCD_API_MIG) && ( defined(ISAMPLE) || defined (CALLISTO)) + return DSPL_COLOUR; +#endif +#ifndef COLOURDISPLAY + return (DSPL_BW); +#endif + +#ifdef R2D_ENABLED + if (R2D_LCD_DISPLAY == R2D_COLOR) + return (DSPL_COLOUR); + else +#endif + return (DSPL_BW); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_TextOut_Cmode | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to display a text at the given + location in_X/in_Y uding the defined attributes (in_Attrib) + and the currently selected color (foreground and background). + The cursor position is left unchanged. The driver will not + take the displays bounding rectangle into consideration and + therefore text may be cut off. + Linefeeds and carriage returns are not supported and there- + fore must be handled by upper layers. + +GW 14/02/03 - SPR#1736 Modified code to call 'dspl_ScrText' to allow a border to be drawn + round chinese characters. + +*/ + + +GLOBAL UBYTE dspl_TextOut_Cmode (USHORT in_X, + USHORT in_Y, + UBYTE in_Attrib, + char * in_Text) +{ + int in_X_signed; + int in_Y_signed; + int txtStyle=0; + // SH - If we want signed coordinates (i.e. if x and y can have negative numbers) + // we need to convert the unsigned values into two's complement. + + if (in_Attrib & DSPL_TXTATTR_SIGNED_COORDS) + { + in_X_signed = (SHORT)in_X; + in_Y_signed = (SHORT)in_Y; + } + else + { + in_X_signed = in_X; + in_Y_signed = in_Y; + } + +#if defined (WIN32) + if (scrEnabled) + { + if (in_Attrib & DSPL_TXTATTR_INVERS) + { + scrText_Invert(in_X, in_Y, in_Text); + } + else + { + scrText(in_X, in_Y, in_Text); + } + } + else + LCD_WriteString (in_Y, in_X, (UBYTE *) in_Text); +#else + if (displayData.DisplayType EQ DSPL_TYPE_CHARACTER) + { + if (in_Attrib & DSPL_TXTATTR_INVERS) + { + if (dspl_char_type == DSPL_TYPE_ASCII) + scrText_Invert(6 * in_X + 2, 8 * in_Y, in_Text); + else + scrText_Invert_Unicode(12 * in_X + 2, 12 * in_Y,(USHORT*) in_Text); + } + else + { + if (dspl_char_type == DSPL_TYPE_ASCII) + scrText(6 * in_X_signed + 2, 8 * in_Y_signed, in_Text); + else + scrText_Unicode(12 * in_X_signed + 2, 12 * in_Y_signed, (USHORT*)in_Text); + } + } + else + { + txtStyle = 0; + if (in_Attrib & DSPL_TXTATTR_INVERS) + txtStyle = TXT_STYLE_INVERT; + else + txtStyle = TXT_STYLE_NORMAL; + if (dspl_char_type != DSPL_TYPE_ASCII) + txtStyle = txtStyle | TXT_STYLE_UNICODE; + dspl_ScrText( in_X_signed,in_Y_signed,in_Text, txtStyle); +// scrText_Unicode(in_X_signed,in_Y_signed, (USHORT*)in_Text); + + } +#endif + /* + * if an external display simulation is used and switched on with the + * EXT_DISPLAY config primitive - send a MMI_DISPLAY_REQ primitive. + */ + if (extDisplay) + dspl_SendDisplayReq (in_X, in_Y, in_Text); + + return DRV_OK; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_TextOut | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to display a text at the given + location in_X/in_Y using the defined attributes (in_Attrib) + It calls dspl_ScrText to actually display the text + +GW 14/02/03 - SPR#1736 Modified code to call 'dspl_ScrText' to allow a border to be drawn + round chinese characters. +*/ + +GLOBAL UBYTE dspl_TextOut(USHORT in_X, + USHORT in_Y, + UBYTE in_Attrib, + char * in_Text) +{ + UBYTE temp; + int in_X_signed; + int in_Y_signed; + int txtStyle=0; + char* op_str; + + /*MC SPR 1319*/ + if (in_Text == NULL) + return DRV_OK; + /*MC end*/ + + op_str = in_Text; + +#if defined (WIN32) + if (!scrEnabled) + { + LCD_WriteString (in_Y, in_X, (UBYTE *) in_Text); + } + else +#endif + { + + if (in_Attrib & DSPL_TXTATTR_SIGNED_COORDS) + { + in_X_signed = (SHORT)in_X; + in_Y_signed = (SHORT)in_Y; + } + else + { + in_X_signed = in_X; + in_Y_signed = in_Y; + } + + /*Mc SPR 1526, we no longer check for current mode*/ + if (in_Attrib & DSPL_TXTATTR_INVERS) + txtStyle = TXT_STYLE_INVERT; + else + txtStyle = TXT_STYLE_NORMAL; + + + if ((in_Attrib&DSPL_TXTATTR_UNICODE) || (in_Text[0] ==0x80)) + { + txtStyle = txtStyle | TXT_STYLE_UNICODE; + if (op_str[0] ==0x80)//if unicode tag at beginning of string + op_str = &op_str[2]; + } + if (displayData.DisplayType EQ DSPL_TYPE_CHARACTER) + { + /* the following is only accurate for a fixed-width font*/ + if (txtStyle & TXT_STYLE_UNICODE) + { + in_X_signed = in_X_signed*12+2; + in_Y_signed = in_Y_signed*12; + } + else + { + in_X_signed = in_X_signed*6+2; + in_Y_signed = in_Y_signed*8; + } + } + + dspl_ScrText( in_X_signed,in_Y_signed,op_str, txtStyle); + } + /* + * if an external display simulation is used and switched on with the + * EXT_DISPLAY config primitive - send a MMI_DISPLAY_REQ primitive. + */ + if (extDisplay) + dspl_SendDisplayReq (in_X, in_Y, in_Text); + + return DRV_OK; +} +/**/ + + + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_SetWorkShadow | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to define the address of the + shadow RAM for drawing operations. + +*/ + +GLOBAL UBYTE dspl_SetWorkShadow (UBYTE * in_ShadowPtr) +{ + return DSPL_FCT_NOTSUPPORTED; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_SetDisplayShadow | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to define the address of the + shadow RAM for displaying operations. + +*/ + +GLOBAL UBYTE dspl_SetDisplayShadow (UBYTE * in_ShadowPtr) +{ + return DSPL_FCT_NOTSUPPORTED; +} + + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : SMI_WM | +| STATE : code ROUTINE : dspl_SendDisplayReq | ++--------------------------------------------------------------------+ + + PURPOSE : sends an MMI_DISPLAY_REQ primitive to write + the text at position X,Y to PL. If the parameter + text is NULL only the cursor position + should change. If in this case the X and Y value + is 0xffff the cursor will be hide. + +*/ +LOCAL void dspl_SendDisplayReq (USHORT x, USHORT y, char *text) +{ +#ifdef NEW_FRAME +T_QMSG Msg; +T_VOID_STRUCT *prim; +#endif + + USHORT sdu_len = (text NEQ NULL) ? strlen (text) : 0; + PALLOC_SDU (mmi_display_req, MMI_DISPLAY_REQ, (USHORT)(sdu_len<<3)); + + mmi_display_req->c_x = x; + mmi_display_req->c_y = y; + + if (text NEQ NULL) + { + /* + * text output + */ + mmi_display_req->attrib.content = CON_TEXT; + mmi_display_req->attrib.control = CTL_NORMAL; + mmi_display_req->sdu.o_buf = 0; + mmi_display_req->sdu.l_buf = (sdu_len<<3); + memcpy (mmi_display_req->sdu.buf, text, sdu_len); + } + else + { + /* + * change the cursor position + */ + mmi_display_req->attrib.content = CON_CURSOR; + mmi_display_req->attrib.control = ((x EQ 0xffff) ? CTL_HIDDEN : CTL_NORMAL); + mmi_display_req->sdu.o_buf = 0; + mmi_display_req->sdu.l_buf = 0; + } + +#if defined NEW_FRAME + if ( hCommMMI == VSI_ERROR ) + { + mmi_handle = vsi_e_handle ( 0, "MMI" ); + hCommMMI = vsi_c_open ( 0, "MMI" ); + prim = vsi_c_pnew ( 100, 0x8000 FILE_LINE_MACRO ); + strcpy ((char*)prim, "REDIRECT MMI 0000111000001010 PAN"); + vsi_c_primitive ( mmi_handle, D2P(prim) ); + } + PSEND(hCommMMI,mmi_display_req); + +#else + ext_primitive (D2P(mmi_display_req), "CST", "PAN", + sizeof (T_PRIM_HEADER) + + sizeof (T_MMI_DISPLAY_REQ) + + sdu_len); + PFREE (mmi_display_req); +#endif +} + +GLOBAL UBYTE dspl_DrawWin (USHORT px, USHORT py, USHORT sx, USHORT sy, int format, t_font_bitmap *bgdBmp) +{ + USHORT x1,y1,x2,y2; + int xOfs,yOfs; + + if (bgdBmp == NULL) + { + scrDrawFilledRect( px+3,py+3, sx, sy, 0x00010101 ); //shadow + scrDrawFilledRect( px,py, sx, sy, dspl_GetBgdColour() ); + + scrRect( px-1,py-1, sx+1, sy+1); + } + else + { + xOfs = (sx-bgdBmp->width)/2; + yOfs = (sy-bgdBmp->height)/2; + + dspl_GetWindow(&x1,&y1,&x2,&y2 ); + + switch (format) + { + case DSPL_WIN_NORMAL: + dspl_show_bitmap(px, py, bgdBmp, SHOWBITMAP_NORMAL ); + break; + case DSPL_WIN_CENTRE: + dspl_show_bitmap(px+xOfs, py+yOfs, bgdBmp, SHOWBITMAP_NORMAL ); + break; + case DSPL_WIN_CLIP: + dspl_SetWindow(px,py,px+sx,px+sy ); + dspl_show_bitmap(px, py, bgdBmp, SHOWBITMAP_NORMAL ); + break; + case DSPL_WIN_CENTRE_CLIP: + dspl_SetWindow(px,py,px+sx,px+sy ); + dspl_show_bitmap(px+xOfs, py+yOfs, bgdBmp, SHOWBITMAP_NORMAL ); + break; + case DSPL_WIN_TILE: + dspl_SetWindow(px,py,px+sx,px+sy ); + yOfs=0; + while(yOfs < sy) + { + xOfs=0; + while (xOfs < sx) + { + dspl_show_bitmap(px+xOfs, py+yOfs, bgdBmp, SHOWBITMAP_NORMAL ); + xOfs=xOfs+bgdBmp->width; + } + yOfs=yOfs+bgdBmp->height; + } + break; + } + dspl_SetWindow(x1,y1,x2,y2 ); + } + +/* switch (format) + { + case 0: + default: + break; + }*/ + return DRV_OK; +} +static int win_x1, win_x2, win_y1, win_y2; + +//Set-up area to be drawn in - limit window to the size of the screen +//Inputs in_x1/y1 - first column/row that can be drawn on +// in_x2/y2 - last column/row +//NB:- inputs are the same as used to clear/draw rectangles BUT +// values stored in win_x2/y2 are +1 to ensure values are treated the same as scrX/Y +GLOBAL UBYTE dspl_SetWindow(USHORT in_X1, + USHORT in_Y1, + USHORT in_X2, + USHORT in_Y2) +{ +int sizeX,sizeY; + + scrSize (&sizeX, &sizeY); + if (in_X1>0) + win_x1 = in_X1; + else + win_x1 = 0; + if (in_Y1>0) + win_y1 = in_Y1; + else + win_y1 = 0; + if (in_X2=0) && ((j)=0) && ((word)=0) && ((j)> 8) | (((col32) &0x0000FC00) >> 5) | (((col32) &0x000000F8) >> 3)))) +#define DSPL_GET_PIXELCOLOUR(col32) (((((col32)<<8) &0x00F80000) | (((col32)<<5) &0x0000FC00) | (((col32)<<3) &0x000000F8))) +#endif + +#ifdef DSAMPLE_COLOUR16 +// July 1, 2005 REF: CRR 32677 - xpradipg +// the extra word padding is not required for the ISAMPLE AND CALLISTO +#if (defined(ISAMPLE) || defined(CALLISTO)) +#define LCD_ROW_NUM_LWORDS ((LCD_COL)/2) /* col size in longwords */ +#else +#define LCD_ROW_NUM_LWORDS ((LCD_COL+1)/2) /* col size in longwords */ +#endif +#define BYTEPERPIXEL 2 +#ifdef PIXEL_0_IN_LSW +#ifdef CHECK_LIMITS +#define DSPL_SET_BITCOLOUR(x,j,col,txt) \ +{\ +if (((j)>=0) && ((j)=0) && ((j)> 8) | (((col32) &0x0000FC00) >> 5) | (((col32) &0x000000F8) >> 3))) +#else +#define DSPL_GET_BITCOLOUR(col32) (~(((((col32) &0x00F80000) >> 8) | (((col32) &0x0000FC00) >> 5) | (((col32) &0x000000F8) >> 3)))) +#endif +#define DSPL_GET_PIXELCOLOUR(col32) (((((col32)<<8) &0x00F80000) | (((col32)<<5) &0x0000FC00) | (((col32)<<3) &0x000000F8))) +#endif + +// 3 words of header info for 'pictures' +#ifdef DSAMPLE_LITE +static UINT32* picture_bw = NULL;//Pointer to data in display. +static UINT32* pictureCopy_bw= NULL;//Pointer to data in display. +#endif//DSAMPLE_LITE + +#ifdef DSAMPLE_COLOUR +static UINT32* picture_col = NULL;//Pointer to data in display. +// Mar 30, 2005 REF: CRR 29986 xpradipg +// removed the unused variable +#ifndef FF_MMI_OPTIM +static UINT32* pictureCopy_col= NULL;//Pointer to data in display. +#endif +#endif + +#ifdef CSAMPLE +#define HEADER_INFO (3) +#define DISPLAY_SIZE (LCD_COL*LCD_COL_NUM_LWORDS) +static UINT32 display_bw [DISPLAY_SIZE+HEADER_INFO+10]; +#ifdef USE_PLOT +static UINT32 displayCopy_bw [DISPLAY_SIZE+HEADER_INFO+1]; /* copy to flag differences */ +#endif +static UINT32* picture_bw=NULL;//Pointer to data in display. +static UINT32* pictureCopy_bw= NULL;//Pointer to data in display. +/* static char scratch [100]; */ /* command buffer - does not support output of new display */ +#endif //CSAMPLE + +#ifdef BSAMPLE +static UBYTE displayScr [LCD_ROW][LCD_COL_B]; /* display buffer */ +static UBYTE displayCopy [LCD_ROW][LCD_COL_B]; /* copy to flag differences */ +/* static char scratch [LCD_ROW*LCD_COL_B*2+100]; */ /* command buffer */ +#endif //BSAMPLE + + +//Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg +//the frame buffer will be defined in the MMI, this has to be put under the +//section DMA in the memory - need to find out how it is done +#if defined(ISAMPLE ) || defined(CALLISTO) +#ifdef FF_MMI_NEW_LCD_API_MIG +#pragma DATA_SECTION(lcd_frame_buffer, ".r2dbuffer") +UINT32 lcd_frame_buffer [LCD_ROW*LCD_ROW_NUM_LWORDS]; +#endif +#endif + + +static int mobEnabled = 1; /* mobile simulation disabled */ + +extern int mfwExtOut (char *cmd); /* forward to ext. display */ +UBYTE lcd_output_ready = TRUE; +UBYTE lcd_output_needed = FALSE; + +#define scrHlen 18 +static const char *scrHeader = "CONFIG MFWMOB SCR "; + +static int scrX, scrY; /* display size */ +#if defined (WIN32) +static int mtkEnabled = 0; /* MMI Toolkit */ +#endif + +static int internal = 0; /* internal use only */ + +static int xIndex; /* data transfer index */ + +//accessible from outside e.g 3th application MMS +void scrPoint (int px, int py, int col); +#if (BOARD == 70) || (BOARD == 71) +U8* get_LCD_bitmap(void) +{ + return NULL; +} + +U32 get_screen_size(void) +{ + return 0; +} + + +void get_screen_capture(U8 *dest_data) +{ + +} + +#else + + +//xrashmic 22 Aug, 2004 MMI-SPR-32798 +#ifdef DSAMPLE_COLOUR16 +#define SC_BITMAP_SIZE ( ((R2D_WIDTH + 7) / 8) * R2D_HEIGHT + 2 * sizeof(U16)) +#endif +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : get_LCD_bitmap | ++--------------------------------------------------------------------+ + + PURPOSE : Return the frame buffer + xrashmic 22 Aug, 2004 MMI-SPR-32798 + Implemented by xreddymn +*/ + +U8* get_LCD_bitmap(void) +{ +#ifdef DSAMPLE_COLOUR16 + return((U8*)picture_col); +#else + return NULL; +#endif +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : get_screen_size | ++--------------------------------------------------------------------+ + + PURPOSE : Return the size of the bitmap to hold the screen shot + xrashmic 22 Aug, 2004 MMI-SPR-32798 + Implemented by xreddymn +*/ +U32 get_screen_size(void) +{ +#ifdef DSAMPLE_COLOUR16 + return SC_BITMAP_SIZE; +#else + return 0; +#endif +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : get_screen_capture | ++--------------------------------------------------------------------+ + + PURPOSE : Dumps the frame buffer data(16bit) into a monochrome data + xrashmic 22 Aug, 2004 MMI-SPR-32798 + Implemented by xreddymn +*/ + +void get_screen_capture(U8 *dest_data) +{ +#ifdef DSAMPLE_COLOUR16 + U8 *source_data; + U32 source_offset=0; + U32 dest_offset=4; + S32 i,j; + U16 pixel_RGB16; + U8 R, G, B; + S32 avg; + U8 color=0; + + /* First two fields (u16) are width and height */ + dest_data[0]=((R2D_WIDTH) & 0xFF); + dest_data[1]=((R2D_WIDTH) & 0xFF00)>>8; + dest_data[2]=((R2D_HEIGHT) & 0xFF); + dest_data[3]=((R2D_HEIGHT) & 0xFF00)>>8; + source_data=get_LCD_bitmap(); + for(j=0;j>11)<<3)|0x07; + G=(((pixel_RGB16>>5)&0x3f)<<2)|0x03; + B=((pixel_RGB16&0x1f)<<3)|0x07; + avg=R+G+B; + avg/=3; + if(avg<0x80) color=0; + else color=1; + dest_data[dest_offset-1]|=(color<<(i%8)); + } + source_offset+=4; /* Add framebuffer padding bytes here */ + } +#endif +} +#endif +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6103) MODULE : DRV_DSPL | +| STATE : code ROUTINE : dspl_BitBlt | ++--------------------------------------------------------------------+ + + PURPOSE : This function is used to display a bitmap at the + specified location using the raster operation provided. + The bitmap format MUST be the same as the display and + cannot contain any transparent colours + If the bitmap does not cover the entire screen area, the rest of the + area is drawn in the background colour provided. + +*/ +#ifdef DSAMPLE_COLOUR +void fastCopyBitmap(int startX, int startY, // start position of bitmap + int bmpSx, int bmpSy, //size of bitmap + char* srcBitmap, + int posX, int posY, // start of area to be copied into + int sx, int sy, // size of area to be copied into + U32 bgd_col, int bmpFormat) +{ + char * image; + int image_sx,image_x; + int bgd_sx_left; + int bgd_sx_right; + int i,y; + char *screen = (char*)picture_col; + U32 bgdColour; + + if (posX < win_x1) + { + sx = sx - (win_x1-posX); + posX = win_x1; + } + if (posX+sx >win_x2) + { + sx = win_x2 - posX; + } + if (posY < win_y1) + { + sy = sy - (win_y1-posY); + posY = win_y1; + } + if (posY+sy >win_y2) + { + sy = win_y2 - posY; + } +{ + char trc[80]; + sprintf(trc,"%d,%d,%d,%d,%d,%d",sx,sy,win_x1,win_y1,win_x2,win_y2); + mmi_trace(trc); +} +#ifdef DSAMPLE_COLOUR32 + if (bmpFormat != BMP_FORMAT_16BIT_LCD_COLOUR) +#endif +#ifdef DSAMPLE_COLOUR16 + if (bmpFormat != BMP_FORMAT_16BIT_LCD_COMPRESSED_COLOUR) +#endif + { + int maxY; + //Either display as much of the image as possible or as much as will fit. + if (bmpSy > sy) + maxY = sy; + else + maxY = bmpSy; + dspl_Clear(posX,posY,(U16)(posX+sx-1),(U16)(posY+sy-1)); + dspl_BitBlt2((short) posX,(short)posY,(USHORT)bmpSx,(USHORT)maxY, + (void *)srcBitmap,0, bmpFormat); + return; + } + + bgdColour = DSPL_GET_BITCOLOUR(bgd_col); + bgdColourArray[0] = (bgdColour & 0x000000FF); + bgdColourArray[1] = (bgdColour & 0x0000FF00) >>8; + bgdColourArray[2] = (bgdColour & 0x00FF0000) >>16; + bgdColourArray[3] = (bgdColour & 0xFF000000) >>24; + for (i=BYTEPERPIXEL;i sx) + { + image_sx = sx - bgd_sx_left; + bgd_sx_right = 0; + } + else + { + bgd_sx_right = sx-(image_sx+bgd_sx_left); + } + if (bgd_sx_right <0) + bgd_sx_right=0; + bgd_sx_right = bgd_sx_right*BYTEPERPIXEL; + bgd_sx_left = bgd_sx_left*BYTEPERPIXEL; + if (image_sx > 0) + image_sx = image_sx*BYTEPERPIXEL; + else + image_sx = 0; + if (image_x > 0) + image_x = image_x*BYTEPERPIXEL; + else + image_x = 0; + if (posY+sy > LCD_ROW) + sy = LCD_ROW - posY; + for (y=posY; y=0) && (yOfsstartY) && (y 0))) + { + image = &srcBitmap[(y-startY)*bmpSx*BYTEPERPIXEL]; + if (bgd_sx_left >0) + memcpy(&screen[yOfs],&bgdColourArray[0],bgd_sx_left); + memcpy(&screen[yOfs+bgd_sx_left],&image[image_x],image_sx); + if (bgd_sx_right >0) + memcpy(&screen[yOfs+bgd_sx_left+image_sx],&bgdColourArray[0],bgd_sx_right); + + } + else + { + memcpy(&screen[yOfs],&bgdColourArray[0],sx*BYTEPERPIXEL); + } + } + } +} +#else +void fastCopyBitmap(int startX, int startY, // start position of bitmap + int bmpSx, int bmpSy, //size of bitmap + char* srcBitmap, + int posX, int posY, // start of area to be copied into + int sx, int sy, // size of area to be copied into + U32 bgd_col, int bmpFormat) +{ + //Fast copy is currently only required for colour bitmaps +} +#endif + + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrMobUpdate | ++--------------------------------------------------------------------+ + + PURPOSE : Shadow display to mobile simulation + +*/ + +void scrMobUpdate (void) +{ +#if defined (WIN32) + USHORT x,y; + USHORT i; + USHORT z; + + if (mtkEnabled) + { + USHORT sdu_len; + + switch (mtkEnabled) + { + case 1: // ASAMPLE + z= LCD_ROW; + sdu_len = 13 * z; // (100 * z Pixels); + { + PALLOC_SDU (mmi_display_req, MMI_DISPLAY_REQ, (USHORT)(sdu_len<<3)); + { + mmi_display_req->c_x = LCD_COL; + mmi_display_req->c_y = z; + i=0; + for (y=0;ysdu.buf[i++] = displayScr[y][x]; + } + + TRACE_EVENT ("Send Display Content"); +#if defined NEW_FRAME + { + { + T_QMSG Message; + + Message.MsgType = MSG_PRIMITIVE; + Message.Msg.Primitive.Prim = D2P(mmi_display_req); + Message.Msg.Primitive.PrimLen = sizeof (T_MMI_DISPLAY_REQ) + LCD_COL_B*z; + #ifdef MEMORY_SUPERVISION + vsi_c_send (VSI_CALLER hCommL1 ,&Message, __FILE__, __LINE__); + #else + vsi_c_send (VSI_CALLER hCommL1 ,&Message); + #endif + } + } +#else +// vsi_c_send (VSI_CALLER hCommL1, D2P(mmi_display_req), sizeof (T_MMI_DISPLAY_REQ) + LCD_COL_B*z); +#endif + } + break; + + case 2: // another target with other dimensions + { + char buf[40]; + sprintf (buf, "LCD NEEDED %d READY %d", lcd_output_needed, lcd_output_ready); + TRACE_EVENT (buf); + } + lcd_output_needed = TRUE; + if (lcd_output_ready) + { + lcd_output_needed = FALSE; + lcd_output_ready = FALSE; + + sdu_len = 14 * 16 + 20; +#if (LCD_ROW >= 64) + { + PALLOC_SDU (mmi_display_req, MMI_DISPLAY_REQ, sdu_len<<3); + + mmi_display_req->c_x = LCD_COL; + mmi_display_req->c_y = 16; + mmi_display_req->attrib.content = 3; + i=0; + for (y=48;y<64;y++) + for (x=0; x < 13; x++) + mmi_display_req->sdu.buf[i++] = displayScr[y][x]; +#if defined NEW_FRAME + { + T_QMSG Message; + + Message.MsgType = MSG_PRIMITIVE; + Message.Msg.Primitive.Prim = D2P(mmi_display_req); + Message.Msg.Primitive.PrimLen = sizeof (T_MMI_DISPLAY_REQ) + 14*16+20; + #ifdef MEMORY_SUPERVISION + vsi_c_send (VSI_CALLER hCommL1 ,&Message, __FILE__, __LINE__); + #else + vsi_c_send (VSI_CALLER hCommL1 ,&Message); + #endif + } +#else + vsi_c_send (VSI_CALLER hCommL1, D2P(mmi_display_req), sizeof (T_MMI_DISPLAY_REQ) + 14*16+20); +#endif + } +#endif +#if (LCD_ROW >= 48) + { + PALLOC_SDU (mmi_display_req, MMI_DISPLAY_REQ, (USHORT)(sdu_len<<3)); + + mmi_display_req->c_x = LCD_COL; + mmi_display_req->c_y = 16; + mmi_display_req->attrib.content = 2; + i=0; + for (y=32;y<48;y++) + for (x=0; x < 13; x++) + mmi_display_req->sdu.buf[i++] = displayScr[y][x]; +#if defined NEW_FRAME + { + T_QMSG Message; + + Message.MsgType = MSG_PRIMITIVE; + Message.Msg.Primitive.Prim = D2P(mmi_display_req); + Message.Msg.Primitive.PrimLen = sizeof (T_MMI_DISPLAY_REQ) + 14*16+20; + #ifdef MEMORY_SUPERVISION + vsi_c_send (VSI_CALLER hCommL1 ,&Message, __FILE__, __LINE__); + #else + vsi_c_send (VSI_CALLER hCommL1 ,&Message); + #endif + } +#else + vsi_c_send (VSI_CALLER hCommL1, D2P(mmi_display_req), sizeof (T_MMI_DISPLAY_REQ) + 14*16+20); +#endif + } +#endif + { + PALLOC_SDU (mmi_display_req, MMI_DISPLAY_REQ, (USHORT)(sdu_len<<3)); + + mmi_display_req->c_x = LCD_COL; + mmi_display_req->c_y = 16; + mmi_display_req->attrib.content = 1; + i=0; + for (y=16;y<32;y++) + for (x=0; x < 13; x++) + mmi_display_req->sdu.buf[i++] = displayScr[y][x]; +#if defined NEW_FRAME + { + T_QMSG Message; + + Message.MsgType = MSG_PRIMITIVE; + Message.Msg.Primitive.Prim = D2P(mmi_display_req); + Message.Msg.Primitive.PrimLen = sizeof (T_MMI_DISPLAY_REQ) + 14*16+20; + #ifdef MEMORY_SUPERVISION + vsi_c_send (VSI_CALLER hCommL1 ,&Message, __FILE__, __LINE__); + #else + vsi_c_send (VSI_CALLER hCommL1 ,&Message); + #endif + } +#else + vsi_c_send (VSI_CALLER hCommL1, D2P(mmi_display_req), sizeof (T_MMI_DISPLAY_REQ) + 14*16+20); +#endif + } + { + PALLOC_SDU (mmi_display_req, MMI_DISPLAY_REQ, (USHORT)(sdu_len<<3)); + + mmi_display_req->c_x = LCD_COL; + mmi_display_req->c_y = 16; + mmi_display_req->attrib.content = 0; + i=0; + for (y=0;y<16;y++) + for (x=0; x < 13; x++) + mmi_display_req->sdu.buf[i++] = displayScr[y][x]; +#if defined NEW_FRAME + { + T_QMSG Message; + + Message.MsgType = MSG_PRIMITIVE; + Message.Msg.Primitive.Prim = D2P(mmi_display_req); + Message.Msg.Primitive.PrimLen = sizeof (T_MMI_DISPLAY_REQ) + 14*16+20; + #ifdef MEMORY_SUPERVISION + vsi_c_send (VSI_CALLER hCommL1 ,&Message, __FILE__, __LINE__); + #else + vsi_c_send (VSI_CALLER hCommL1 ,&Message); + #endif + } +#else + vsi_c_send (VSI_CALLER hCommL1, D2P(mmi_display_req), sizeof (T_MMI_DISPLAY_REQ) + 14*16+20); +#endif + } + TRACE_EVENT ("Send Display Content"); + } + break; + } + } +#endif + +#ifdef BSAMPLE + if (mobEnabled) + { +/* ## scratch is not required and function mfwExtOut is + ## not doing anything + sprintf(scratch,"%s%s %d",scrHeader,"disp",LCD_COL_B); + xIndex = 0; + mfwExtOut(scratch); + */ + } +#endif +} + + +int dspl_GetContrastColour( int ipCol) +{ + switch (ipCol & 0x00808080) + { + case 0x000000: return (0x00FFFFFF); + case 0x000080: return (0x00FFFF00); + case 0x008000: return (0x00FF00FF); + case 0x008080: return (0x00FF0000); + case 0x800000: return (0x0000FFFF); + case 0x800080: return (0x0000FF00); + case 0x808000: return (0x000000FF); + case 0x808080: return (0x00000000); + default: return (0x00808080); + } + return (0x00808080); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrLCDUpdate | ++--------------------------------------------------------------------+ + + PURPOSE : Shadow display to LCD + +*/ + +//GW Procedure/data supplied by new TI Driver V5.3.1 +#ifdef R2D_ENABLED + +static T_R2D_SHAPE_PTR scrDisplayRect = NULL; //rectangle defined as shape of the display +static T_R2D_GC_PTR scrPicPtr = NULL; //Pointer to gc with picture in it (b+w and col) +static T_RVF_MB_ID mb_id; //ID of memory bank +void r2d_refresh(void); +int riv_err; +extern T_R2D_GC_PTR r2d_g_lcd_gc; +#endif // R2D_ENABLED +static int picInit = 0; //Have we set up the mb id etc yet ? + +//Initialises data required for bolck copy of a 'picture' +void scrRivPictureClear(void) +{ +#ifdef CSAMPLE + memset(display_bw,0,sizeof(display_bw)); +#ifdef USE_PLOT + memset(displayCopy_bw,0,sizeof(displayCopy_bw)); + pictureCopy_bw = &displayCopy_bw[3]; //start of input data +#endif + + display_bw[0] = LCD_COL; + display_bw[1] = LCD_ROW; + display_bw[2] = DISPLAY_SIZE; + picture_bw = &display_bw[3]; //start of input data +#endif + +#ifdef DSAMPLE_COLOUR +#ifdef USEBUFFER + display_colour[0] = LCD_COL; + display_colour[1] = LCD_ROW; + display_colour[2] = DISPLAY_SIZE; + picture_col = &display_colour[3]; //start of input data +#else +//Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg +//the picture_col is assigned with the address of the new frame buffer + #ifdef FF_MMI_NEW_LCD_API_MIG + picture_col = lcd_frame_buffer; + #else + picture_col = r2d_get_pixmap(r2d_g_lcd_gc); +#endif +#endif + { + U32 lWord,bitCol; + int j,y; + //GW When clearing screen - do not allow transparent background colours! + int bgdCol = dspl_GetBgdColour(); + int fgdCol = dspl_GetFgdColour(); + if (((bgdCol & 0x00F0F0F0) == (fgdCol & 0x00F0F0F0)) || + ((bgdCol & 0xFF000000) == TRANSPARENT_32BIT_COLOUR)) + { + /*Foreground and background colours are the same (or near enough) */ + /* or background colour is transparent */ + /*Select a colour that will contrast with the current foreground colour */ + bgdCol = dspl_GetContrastColour(fgdCol); + } + bitCol = (DSPL_GET_BITCOLOUR(bgdCol)) & 0x00FFFFFF; + +#ifdef DSAMPLE_COLOUR32 + bgdColourArray[0] = (bitCol & 0x000000FF); + bgdColourArray[1] = (bitCol & 0x0000FF00) >>8; + bgdColourArray[2] = (bitCol & 0x00FF0000) >>16; + bgdColourArray[3] = (bitCol & 0xFF000000) >>24; + for (j=4;j>8; + for (j=2;j> 2) | TOP_BITS_SET; +#else + //B+W display - blank every second pixel + *picPtr = (*picPtr) & mask; +#endif + picPtr++; + } + } + } +#endif /* _SIMULATION_ */ +} + + +//Set colour (only when different from last time) +void scrSetR2DFgdCol(UINT32 col) +{ + U16 opCol_a,opCol_r,opCol_g,opCol_b; + static UINT32 oldCol = 0xFFFFFFFF; + if (col != oldCol) + { +#ifdef DSAMPLE_COLOUR + opCol_a = 0xFF; // ((col & 0x0000FF00) >> 16); + opCol_r = ((col & 0x0000F800) >> 8); + opCol_g = ((col & 0x000007E0) >> 3); + opCol_b = ((col & 0x0000001F) << 3); +#else + opCol_a = 0xFF; // ((col & 0x0000FF00) >> 16); + opCol_r = ((col & 0x000000E0) ); + opCol_g = ((col & 0x0000001C) << 3); + opCol_b = ((col & 0x00000003) << 6); + if (opCol_r == 0) opCol_r = 0x80; + if (opCol_g == 0) opCol_g = 0x40; +#endif +#ifdef R2D_ENABLED + r2d_set_foreground_color_with_argb(r2d_g_lcd_gc, opCol_a, opCol_r, opCol_g, opCol_b ); + oldCol = col; +#endif + } +} +//Set colour (only when different from last time) +void scrSetR2DBgdCol(UINT32 col) +{ + U16 opCol_a,opCol_r,opCol_g,opCol_b; + static UINT32 oldCol = 0xFFFFFFFF; + if (col != oldCol) + { +#ifdef DSAMPLE_COLOUR + opCol_a = 0xFF; // ((col & 0x0000FF00) >> 16); + opCol_r = ((col & 0x0000F800) >> 8); + opCol_g = ((col & 0x000007E0) >> 3); + opCol_b = ((col & 0x0000001F) << 3); +#else + opCol_a = 0xFF; // ((col & 0x0000FF00) >> 16); + opCol_r = ((col & 0x000000E0) ); + opCol_g = ((col & 0x0000001C) << 3); + opCol_b = ((col & 0x00000003) << 6); + if (opCol_r == 0) opCol_r = 0x80; + if (opCol_g == 0) opCol_g = 0x40; +#endif +#ifdef R2D_ENABLED + r2d_set_background_color_with_argb(r2d_g_lcd_gc, opCol_a, opCol_r, opCol_g, opCol_b ); + oldCol = col; +#endif + } +} +//GW Procedure/data supplied by new TI Driver V5.3.1 +//length of array (32bit words) to hold a copy of the screen (maybe) +#ifdef R2D_ENABLED +extern T_R2D_GC_PTR r2d_g_lcd_gc; +#endif +/* */ +void scrPlotR2DPoint(U32 col, INT16 x, INT16 y) +{ +#ifdef R2D_ENABLED + static U32 fCol=0xFFFFFFFF; + static U32 bCol=0xFFFFFFFF; + static U32 flip=0; + if (fCol==col) + { + scrSetR2DFgdCol(col ); + r2d_draw_point(r2d_g_lcd_gc,x,y); + } + else if (bCol == col) + { + scrSetR2DBgdCol(col ); + r2d_erase_point(r2d_g_lcd_gc,x,y); + } + else if (flip) + { + flip = 0; + scrSetR2DBgdCol(col ); + + r2d_erase_point(r2d_g_lcd_gc,x,y); + bCol = col; + } + else + { + flip = 1; + scrSetR2DFgdCol(col ); + r2d_draw_point(r2d_g_lcd_gc,x,y); + fCol = col; + } +#endif +} + +#ifdef BSAMPLE +void scrLCDUpdate (void) +{ +#ifdef USE_PLOT + int nPlots=0; + + int row,rowstart; + int kstart,kend,k; + UBYTE *bcopy; + int i,j; + UBYTE m; + UBYTE *bm; +#else + int i; +#endif + +#if defined (WIN32_SIM) + return; +#endif + if (!scrEnabled) + return; + +#ifdef USE_PLOT + bm = &displayScr[0][0]; + bcopy = &displayCopy[0][0]; + m = 0x80; + for (j = 0; j < LCD_ROW; j++) + { + for (k = 0; k < (LCD_COL+7)/8; k++) + { + //Only plot data if it has changed since last time + if (*bm != *bcopy) + { + m = 0x80; + kstart = k*8; + kend = k*8+8; + if (kend>LCD_COL) + kend = LCD_COL; + for (i = kstart; i < kend; i++) + { +#ifdef R2D_ENABLED + if ((*bm) & m) + + r2d_draw_point(r2d_g_lcd_gc,i,j); + else + r2d_erase_point(r2d_g_lcd_gc,j,i); +#endif + m >>= 1; + } + *bcopy = *bm;//Update value + } + bm++; + bcopy++; + } + } + +#else + //* work around limitations of TI driver ! * + for (i = 0; i < LCD_ROW; i++) + { + displayScr[i][LCD_COL_B-1] &= 0xF0; + displayScr[i][LCD_COL_B-1] |= (UBYTE) ((displayScr[i][6] >> 2) & 0x0F); + } + + LCD_PixBlt(0,0,LCD_COL_B*8,8,(char*)&displayScr[0][0]); + LCD_PixBlt(0,8,LCD_COL_B*8,8,(char*)(&(displayScr[8][0]))); + LCD_PixBlt(0,16,LCD_COL_B*8,8,(char*)(&(displayScr[16][0]))); + LCD_PixBlt(0,24,LCD_COL_B*8,8,(char*)(&(displayScr[24][0]))); +#if (!CUST)//JVJE #if (CUST==1) + LCD_PixBlt(0,32,LCD_COL_B*8,8,(char*)(&(displayScr[32][0]))); + LCD_PixBlt(0,40,LCD_COL_B*8,8,(char*)(&(displayScr[40][0]))); +#endif +#endif + +} +#endif + + + + +#ifdef CSAMPLE +void scrLCDUpdate (void) +{ +int kstart,kend,k; +int row,rowstart; +int i,j; +INT16 x1,y1; +UINT32 m; +UINT32 *bm; +UINT32 *bcopy; +static UINT32 col=0; +int count; +int nPlots=0; + +#if defined (WIN32_SIM) + return; +#endif + if (!scrEnabled) + return; + +#ifdef USE_PLOT + + bm = picture_bw; + bcopy = pictureCopy_bw; + for (j = 0; j < DISPLAY_SIZE; j++) + { + if (*bm != *bcopy) + { + //Only plot data if it has changed since last time + m = 0x80000000; + + x1 = j / LCD_COL_NUM_LWORDS; + y1 = j % LCD_COL_NUM_LWORDS; + y1 = y1 << 5; + y1 = (y1 + 16); + x1 = (scrX-1)-x1; + kstart = y1; + kend = y1+32; + for (i = kstart; i < kend; i++) + { + nPlots++; +#ifdef R2D_ENABLED + if ((*bm) & m) + r2d_draw_point(r2d_g_lcd_gc,x1,(i%64)); + else + + r2d_erase_point(r2d_g_lcd_gc,x1,(i%64)); +#endif + m >>= 1; + } + *bcopy = *bm;//Update value + } + bm++; + bcopy++; + if (nPlots > MAX_NUMBER_PLOTS) + return; + } +#else + if (scrPicPtr != NULL) + { +#ifdef R2D_ENABLED + r2d_fast_blit(scrPicPtr,r2d_g_lcd_gc); +#endif + vsi_t_sleep(VSI_CALLER (20)); + } +#endif //old/new +} +#endif //CSAMPLE + +//June 03, 2005 REF: GSM-ENH-31636 xpradipg +//CRR 28825: xpradipg - 11 Feb 2005 +#if (defined(DSAMPLE) || defined(ESAMPLE) || defined(ISAMPLE) || defined(CALLISTO))// changes for flag cleanup and addition for ISAMPLE +void scrLCDUpdate (void) +{ +// Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg +//the co-ordinates are set to the entire LCD as we will be refreshing whole LCD +#ifdef FF_MMI_NEW_LCD_API_MIG +lcd_fb_coordinates p_lcd_coord = { 0,0,LCD_COL,LCD_ROW}; +#endif +#if defined (WIN32_SIM) + return; +#endif + if (!scrEnabled) + return; +//Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg +//call the new lcd AP in place of the old for refresh +#ifdef FF_MMI_NEW_LCD_API_MIG + lcd_display(DISPLAY_MAIN_LCD,(U16*)picture_col,&p_lcd_coord); +#else +#ifdef R2D_ENABLED + r2d_flush(); +#endif +#endif +} +#endif//D-sample + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrMobCommand | ++--------------------------------------------------------------------+ + + PURPOSE : Command string from mobile simulation + +*/ + + +void scrMobCommand (char *s) +{ +#ifdef BSAMPLE + char *p; + unsigned char *q; + int i; + char scratch [LCD_ROW*LCD_COL_B*2+100]; /* command buffer */ + + if (strstr(s,"ena") == s) + { + mobEnabled = 1; + return; + } + if (strstr(s,"dis") == s) + { + mobEnabled = 0; + return; + } + if (strstr(s,"ok") == s) + { + if (xIndex < 0) + return; + strcpy(scratch,scrHeader); + if (xIndex >= sizeof(displayScr)) + { + strcat(scratch,"done"); + mfwExtOut(scratch); + return; + } + strcat(scratch,"data "); + p = scratch + strlen(scratch); + sprintf(p,"%04d %04d ",xIndex,LCD_COL_B*LCD_ROW/DISPL_DIV); + p = scratch + strlen(scratch); + q = (UBYTE *) displayScr; + for (i = 0; i < LCD_COL_B * LCD_ROW / DISPL_DIV; i++) + { + sprintf(p,"%02x",q[xIndex++]); + p += 2; + } + *p = '\0'; + mfwExtOut(scratch); + return; + } + #endif +} + + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrInit | ++--------------------------------------------------------------------+ + + PURPOSE : initialize screen driver + +*/ + +void scrInit (void) +{ +// Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg +//New LCD API for initialization +#ifdef FF_MMI_NEW_LCD_API_MIG + lcd_initialization(DISPLAY_MAIN_LCD); +#else + LCD_SetPower(); /* ES!! */ + LCD_Reset(); + LCD_Enable(1); + +#endif + dspl_InitColour (); + +#ifdef LSCREEN + font_initFont(1); +#else + font_initFont(0); +#endif + +#ifdef BSAMPLE + memset(displayScr,0,sizeof(displayScr)); + memset(displayCopy,0,sizeof(displayCopy)); +#else + scrRivPictureInit(); +#endif +//Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg +//clear the buffer with background color, since r2d_erase does the same +#ifdef FF_MMI_NEW_LCD_API_MIG + scrRivPictureClear(); +#else +#ifdef R2D_ENABLED + r2d_erase( r2d_g_lcd_gc ); +#endif +#endif + mobEnabled = 0; + scrEnabled = 1; + internal = 0; + scrX = LCD_COL; + scrY = LCD_ROW; + xIndex = -1; + displayData.DisplayType = DSPL_TYPE_GRAPHIC; + //GW Set display window to full screen + dspl_ResetWindow(); +} + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrExit | ++--------------------------------------------------------------------+ + + PURPOSE : finalize screen driver + +*/ + +void scrExit (void) +{ + LCD_Enable(0); + mobEnabled = 0; + scrEnabled = 0; + xIndex = -1; +} + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrUpdate | ++--------------------------------------------------------------------+ + + PURPOSE : set screen update mode + +GW 18/09/01 clear text invert flag whenever display is enabled/disabled. +*/ +//GW mmi_trace is a call to the MMI to provide timings for MMI updates - +//REMOVE FROM FINAL BUILD (if I forget!) +int scrUpdate (int onOff) +{ + int ena = scrEnabled; + txtInvert = 0; //clear text invert flag whenever display is enabled/disabled. + scrEnabled = onOff; + if (scrEnabled) + { +#ifdef MMI_TRACE +mmi_trace("scrupdate() enable start"); +#endif + scrLCDUpdate(); + scrMobUpdate(); +#ifdef MMI_TRACE +mmi_trace("scrupdate() enable end"); +#endif + } + else + { +#ifdef MMI_TRACE +mmi_trace("scrupdate() disabled"); +#endif + } + return ena; +} + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrSize | ++--------------------------------------------------------------------+ + + PURPOSE : retrieve display size + +*/ + +void scrSize (int *x, int *y) +{ + *x = scrX; + *y = scrY; +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrOnOff | ++--------------------------------------------------------------------+ + + PURPOSE : switch display On/Off + +*/ + +void scrOnOff (int on) +{ +//kk to be checked +/* ## scratch is not required and function mfwExtOut is + ## not doing anything + sprintf(scratch,"%sscrOnOff:%d",scrHeader,on); + mfwExtOut(scratch); + */ +} + +#if (!CUST)//JVJE #if (CUST==1) +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrLight | ++--------------------------------------------------------------------+ + + PURPOSE : switch display backlight On/Off + +*/ + +void scrLight (int on) +{ +//kk to be checked +/* ## scratch is not required and function mfwExtOut is + ## not doing anything + sprintf(scratch,"%sscrLight:%d",scrHeader,on); + mfwExtOut(scratch); + */ +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrClear | ++--------------------------------------------------------------------+ + + PURPOSE : clear display + +*/ + +void scrClear (void) +{ + +#ifdef BSAMPLE + memset(displayScr,0,sizeof(displayScr)); +#else + scrRivPictureClear(); +#endif + + if (scrEnabled) + { +//Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg +//this is specific to old driver. A corresponding API exist with new apis. +//need to check if it can be used +#ifndef FF_MMI_NEW_LCD_API_MIG + LCD_Clear(); /* TI driver function */ +#endif + scrMobUpdate(); /* update mobile simulation */ + } +} +#endif //CUST==1 + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrClearRect | ++--------------------------------------------------------------------+ + + PURPOSE : clear display area + +*/ +#ifdef DSAMPLE_LITE + +void scrDrawFilledRect (int px, int py, int sx, int sy, U32 col) +{ + int i,j; + U32 opCol; + int word; + + //Limit rectangle to the size of the screen. + if ((px >= scrX) || (py >= scrY)) + return; + + if ((col& 0xFF000000) == TRANSPARENT_32BIT_COLOUR) + return; //Background colour is transparent + + //Allow -ve sizes but change data round + if (sx <0) + { + px = px+sx; + sx = -sx; + } + if (sy <0) + { + py = py+sy; + sy = -sy; + } + //Limit rectangle to size of window + if (px=win_x2) + sx = win_x2 - px-1; + if (py+sy >=win_y2) + sy = win_y2 - py-1; + if ((sx <= 0) || (sy<=0)) + return;//cannot draw zero width rectangle. + + opCol = col; + { + U32 maskL, maskR; + int skipBits,startWord,endWord; + maskL = 0xFFFFFFFF; + skipBits = px & 0x1F; + maskL = maskL << skipBits; + startWord = px >> 5; + maskR = 0xFFFFFFFF; + skipBits = (px+sx) & 0x1F; + maskR = ~(maskR << skipBits); + endWord = (px+sx) >> 5; + if (startWord == endWord) + { + maskL = maskL & maskR; + maskR = maskL; + } + + if (col == 0) + { //Set bgd colour to Black (0) + for (j = py; j < py + sy; j++) + { + word = DSPL_GET_LWORD(px,j); + picture_bw[word] = picture_bw[word] & (~maskL); + word++; + for (i = startWord+1; i < endWord; i++) + { + picture_bw[word] = 0; + word++; + } + word = DSPL_GET_LWORD(px+sx,j); + picture_bw[word] = picture_bw[word] & (~maskR); + } + } + else + { //Set bgd colour to White (1) + for (j = py; j < py + sy; j++) + { + word = DSPL_GET_LWORD(px,j); + picture_bw[word] = picture_bw[word] | (maskL); + word++; + for (i = startWord+1; i < endWord; i++) + { + picture_bw[word] = 0xFFFFFFFF; + word++; + } + word = DSPL_GET_LWORD(px+sx,j); + picture_bw[word] = picture_bw[word] | (maskR); + } + } + } +} +#endif + +#ifdef DSAMPLE_COLOUR + +void scrDrawFilledRect (int px, int py, int sx, int sy, U32 col) +{ + int i,j; + U32 opCol; + char* screen; + + //Limit rectangle to the size of the screen. + if ((px >= scrX) || (py >= scrY)) + return; + + if ((col& 0xFF000000) == TRANSPARENT_32BIT_COLOUR) + return; //Background colour is transparent + + //Allow -ve sizes but change data round + if (sx <0) + { + px = px+sx; + sx = -sx; + } + if (sy <0) + { + py = py+sy; + sy = -sy; + } + //Limit rectangle to size of window + if (px win_x2) + sx = win_x2 - px; + if (py+sy > win_y2) + sy = win_y2 - py; + if ((sx <= 0) || (sy<=0)) + return;//cannot draw zero width rectangle. + + opCol = col; + //GW Fix - invert colour +#ifdef USE_PLOT + for (j = py; j < py + sy; j++) + { + for (i = px; i < px+sx; i++) + scrPoint(i,j,opCol); + } +#else + { + U32 lWord,bgdColour; + int y; + screen = (char*)picture_col; + bgdColour = DSPL_GET_BITCOLOUR(col); + bgdColourArray[0] = (bgdColour & 0x000000FF); + bgdColourArray[1] = (bgdColour & 0x0000FF00) >>8; + bgdColourArray[2] = (bgdColour & 0x00FF0000) >>16; + bgdColourArray[3] = (bgdColour & 0xFF000000) >>24; + for (i=BYTEPERPIXEL;i= scrX || py >= scrY + || sx < 0 || sy < 0) + return; + if (px + sx > scrX) + sx = scrX - px; + if (py + sy > scrY) + sy = scrY - py; + + //Limit rectangle to size of window + if (pxwin_x2) + sx = win_x2 - px; + if (py+sy >win_y2) + sy = win_y2 - py; + if ((sx <= 0) || (sy<=0)) + return;//cannot draw zero width rectangle. + +#ifdef BSAMPLE + x1 = px / 8; /* first x offset */ + x2 = (px + sx) / 8; /* last x offset */ + m1 = m2 = 0xff; + m1 = (UBYTE) ~(m1 >> (px & 7)); /* left mask */ + m2 = (UBYTE) (m2 >> ((px + sx) & 7)); /* right mask */ + if (x1 == x2) + m1 = m2 = m1 | m2; /* combined masks */ + for (j = py; j < py + sy; j++) + { + displayScr[j][x1] &= m1; + for (i = x1 + 1; i < x2; i++) + displayScr[j][i] = '\0'; + displayScr[j][x2] &= m2; + } +#endif + +#ifdef CSAMPLE + for (i=0;i scrY) + return; + + while ((*txt) && (x <= scrX)) + { + current_code = (USHORT)((*txt)<<8)+(USHORT)((*txt)>>8);/*The USHORT is inverted, therefore we have to apply this simple change*/ + current_bitmap = get_bitmap(current_code); + if (!current_bitmap) /*ASCII codes will be represented*/ + { + first_byte_code = (USHORT)((*txt)&0xFF); + error_bitmap = get_bitmap(first_byte_code); + if (error_bitmap) + { + dspl_show_bitmap(x,y,error_bitmap,SHOWBITMAP_INVERT); + x += error_bitmap->width; + } + second_byte_code = (USHORT)((*txt)>>8); + error_bitmap = get_bitmap(second_byte_code); + if (error_bitmap) + { + dspl_show_bitmap(x,y,error_bitmap,SHOWBITMAP_INVERT); + x += error_bitmap->width; + } + } + else + { + dspl_show_bitmap(x,y,current_bitmap,SHOWBITMAP_NORMAL); + x += current_bitmap->width; + } + txt++; + } + +} + + +#ifndef DSAMPLE_COLOUR +//Should work for DSAMPLE_LITE +void dspl_show_bitmap(int x,int y,t_font_bitmap* current_bitmap,U32 attr ) +{ + USHORT i, j,a,b; + int bmpWidthBytes; + bmpWidthBytes = (current_bitmap->width + 0x07) >> 3; + + for (i = 0; i < current_bitmap->height; i++) + for (j = 0; j < current_bitmap->width; j++) + { + a = (j&(0x07)); + b = i*(bmpWidthBytes)+((j&0xF8)>>3); + if ((attr & SHOWBITMAP_SCALE_2x4) == 0) + { + if ((attr & SHOWBITMAP_NORMAL_MASK) == SHOWBITMAP_NORMAL) + scrPoint(x+j,y+i,current_bitmap->bitmap[b]&(0x80>>a)); + else + scrPoint(x+j,y+i,((UBYTE)~(current_bitmap->bitmap[b]))&(0x80>>a)); + } + else + { + int x1,y1; + int px = (current_bitmap->bitmap[b]&(0x80>>a)); + for (x1 = x+j*2;x1 < x+j*2+2; x1++) + for (y1 = y+i*4; y1format) + { + case BMP_FORMAT_BW_UNPACKED: + case BMP_FORMAT_BW_PACKED: + //b+w bitmap - deal with both packed and unpacked. + bmpMask = 0x80; + bmpByte = 0; + if (attr & SHOWBITMAP_INVERT) //invert + { + fCol = dspl_GetBgdColour(); + bCol = dspl_GetFgdColour(); + } + else + { + fCol = dspl_GetFgdColour(); + bCol = dspl_GetBgdColour(); + } + if (fCol==bCol) + { + fCol = 0x000000FF; + bCol =0x00FFFF00; + } + for (i = 0; i < current_bitmap->height; i++) + { + for (j = 0; j < current_bitmap->width; j++) + { + /* a = (j&(0x07)); + b = i*((current_bitmap->bitmapSize)/(current_bitmap->height))+((j&0xF8)>>3); + bitSet = current_bitmap->bitmap[b]&(0x80>>a);*/ + bitSet = current_bitmap->bitmap[bmpByte]&(bmpMask); + + /*MC SPR 1526*/ + if (bitSet) + col = fCol; + else + col = bCol; + if (col!=TRANSPARENT_32BIT_COLOUR)/*if colour transparent, don't draw point*/ + { + scrPoint(x+j,y+i,col); + } + /*MC 1526 end*/ + + if (bmpMask <= 1) + { + bmpMask = 0x80; + bmpByte++; + } + else + bmpMask = bmpMask >>1; + } + // If we have an unpacked bitmaps and we are not already on a new byte, we move to a new byte + if ((current_bitmap->format == BMP_FORMAT_BW_UNPACKED) && (bmpMask != 0x80)) + { + bmpMask = 0x80; + bmpByte++; + } + } + break; + case BMP_FORMAT_256_COLOUR: + //bitmap is 256 colour bitmap - ignore 'attr' + bmpByte = 0; + + for (i = 0; i < current_bitmap->height; i++) + { + for (j = 0; j < current_bitmap->width; j++) + { + UINT32 col; + UINT32 colR,colG,colB; + col = current_bitmap->bitmap[bmpByte]; + if (col!=TRANSPARENT_256_COL) + { + bitCol = (((col &0xE0) <<16) | + ((col &0x1C) <<11) | + ((col &0x03) << 6));/**/ + //assume 16 bit colour + scrPoint(x+j, y+i,bitCol); + } + bmpByte = bmpByte+1; //move to next byte + + } + } + break; + case BMP_FORMAT_32BIT_COLOUR: + //bitmap is a 32 bit colour bitmap - ignore 'attr' + bmpByte = 0; + for (i = 0; i < current_bitmap->height; i++) + { + for (j = 0; j < current_bitmap->width; j++) + { + //32 bit bitmap - data is in bytes + //bmpByte = (i*current_bitmap->width+j)*4; + bitCol = ((current_bitmap->bitmap[bmpByte] <<24) | + (current_bitmap->bitmap[bmpByte+1] <<16) | + (current_bitmap->bitmap[bmpByte+2] <<8) | + (current_bitmap->bitmap[bmpByte+3])); + if ((bitCol & 0xFF000000)!=TRANSPARENT_32BIT_COLOUR) + scrPoint(x+j,y+i,bitCol); + bmpByte = bmpByte+4; //move to next 32bit word + } + } + break; + case BMP_FORMAT_16BIT_LCD_COLOUR: //32 bits only first 2 bytes used + case BMP_FORMAT_16BIT_LCD_COMPRESSED_COLOUR: //16 bits + bmpByte = 0; + if (current_bitmap->format == BMP_FORMAT_16BIT_LCD_COMPRESSED_COLOUR) + step = 2; + else + step = 4; + for (i = 0; i < current_bitmap->height; i++) + { + for (j = 0; j < current_bitmap->width; j++) + { + //32 bit bitmap - data is in bytes + //bmpByte = (i*current_bitmap->width+j)*4; + bitCol = ((current_bitmap->bitmap[bmpByte+1] <<8) | + (current_bitmap->bitmap[bmpByte])); + if ((bitCol & 0x0000FFFF)!=TRANSPARENT_16BIT_COL) + { + + lWord = DSPL_GET_LWORD(x+j,y+i); +// July 1, 2005 REF: CRR 32677 - xpradipg +// The data present of all 16bit images are in the negated format hence we +// renegate to get it in the right format +#if (defined(ISAMPLE) ||defined(CALLISTO)) + bitCol = ~bitCol; +#endif + DSPL_SET_BITCOLOUR(x+j,lWord,bitCol,"dsplShowbitmap"); +} + bmpByte = bmpByte+step; //move to next 32/16bit word + } + } + + break; + default: //Unknown format + break; + } +} +#endif + + +#define NO_COLOUR 0xFF123456 +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : dspl_setBorderWidth | ++--------------------------------------------------------------------+ + + PURPOSE : sets current border width + +GW 10/02/03 SPR#1721 - Created +*/ +static int txtBorder=0; +int dspl_setBorderWidth(int borderSize) +{ + int oldBorder; + oldBorder = txtBorder; + if ((borderSize >=0) && (borderSize <=4)) + txtBorder = borderSize; + return (oldBorder); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : dspl_getBorderWidth | ++--------------------------------------------------------------------+ + + PURPOSE : returns current border width + +GW 10/02/03 SPR#1721 - Created + +*/ +int dspl_getBorderWidth(void) +{ + return(txtBorder); +} +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrCharBorderOutput | ++--------------------------------------------------------------------+ + + PURPOSE : draw text with a border + +GW 10/02/03 SPR#1721 - Created +*/ +void scrCharBorderOutput(t_font_bitmap* chrBmp, + unsigned int fgdCol,unsigned int bgdCol,unsigned int borderCol, + int bWidth, + int px,int py + ) +{ + int x,y,i; + int line[10]; + int ofs; + int bgdLine; + int col; + int emask,pmask; + int init_emask = (0x01 << (28+bWidth)); + int init_pmask = (0x01 << (28+bWidth)); +/* + +*/ + for (i=0;i<10;i++) + line[i] = 0; + + //trace("col=",fgdCol, bgdCol,borderCol,0x13); + + //set up border mask + for (i=1;i> i) | (init_pmask << i); + } + //trace("masks=",init_emask,init_pmask,0,0x12); + + for (y=-bWidth;yheight+bWidth;y++) + { + //trace("y,ht,bWidth",y,chrBmp->height,bWidth, 0x03); + for (i=0;iheight) + { + //work out where we want to display background + bgdLine = 0x0FFFFFF0; + bgdLine = bgdLine & (bgdLine << (24-chrBmp->width)); + //Assume bitmaps are unpacked + switch((chrBmp->width+7) & (0xF8)) + { + case 0x00: //no data + break; + case 0x08: // 1 byte/char + ofs = y+bWidth; + line[bWidth*2] = ((unsigned int)chrBmp->bitmap[ofs]) << 20; + break; + case 0x10: // 2 bytes/char + ofs = (y+bWidth)*2; + line[bWidth*2] = (((unsigned int)chrBmp->bitmap[ofs]) << 20) | + (((unsigned int)chrBmp->bitmap[ofs+1]) << 12) ; + break; + case 0x18: // 3 bytes/char + ofs = (y+bWidth)*3; + line[bWidth*2] = (((unsigned int)chrBmp->bitmap[ofs]) << 20) | + (((unsigned int)chrBmp->bitmap[ofs+1]) << 12) | + (((unsigned int)chrBmp->bitmap[ofs+2]) << 4) ; + break; + default:// unable to handle bitmaps > 24 pixels wide + //output checkerboard pattern as an error + if (y &0x01) + line[bWidth*2] = 0x0CCCCCC0; + else + line[bWidth*2] = 0x05555550; + break; + } + } + else + { + line[bWidth*2] = 0x00000000; + bgdLine = 0x00; + } + //trace("line=",line[0],line[1], line[2], 0x13); + + emask = init_emask; // if any of the 3 pixels are set - erase point + pmask = init_pmask; // only when pixel is set - plot point. + + for (x=-bWidth;xwidth+bWidth;x++) + { + col = NO_COLOUR; + if (line[bWidth] & pmask) + { + //pixel is in fgd colour + col = fgdCol; + } + else + { + for (i=0;i>1; + pmask = pmask>>1; +// trace("masks=",emask,pmask,col,0x13); + } + } +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrFastCharOutput | ++--------------------------------------------------------------------+ + + PURPOSE : draw text avoiding using scrPoint + +GW 10/02/03 SPR#1736 - Created +*/ +#ifdef DSAMPLE_COLOUR + +void scrFastCharOutput(t_font_bitmap* chrBmp, + unsigned int fColconv,unsigned int bColconv, + int x,int y + ) +{ + int fHeight = dspl_GetFontHeight(); + int ofs = chrBmp->height - fHeight; + int width = chrBmp->width; + int i,j,k = 0; + int sx,sy,ex,ey,lWord; + int bitSet; + UBYTE mask; + int ofsj,nbytes; + unsigned int col; + //ensure that the data is never wiritten 'off-screen' + if (x+width > win_x2) + ex = win_x2-x; + else + ex = width; + if (y+fHeight > win_y2) + ey = win_y2-y; + else + ey = fHeight; + if (x < win_x1) + sx = win_x1-x; + else + sx = 0; + if (y < win_y1) + sy = win_y1-y; + else + sy = 0; + + nbytes = (width+7) >>3; + ofs = ofs + sy; + for (i=sy;i> (sx & 0x07); + ofsj = sx >> 3; + for (j=sx;j=0) + bitSet = chrBmp->bitmap[ofs*nbytes+ofsj]&(mask); + else + bitSet = 0; + + if (bitSet) + col = fColconv; + else + col = bColconv; + if (col!=TRANSPARENT_32BIT_COLOUR) + { + lWord = DSPL_GET_LWORD(j+x,i+y); + DSPL_SET_BITCOLOUR(j+x,lWord,col,"scrFastCharOutput"); + } + mask = mask >> 1; + if (mask==0) + { + ofsj++; + mask = 0x80; + } + } + ofs++; + } +} +#endif + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrCharOutput | ++--------------------------------------------------------------------+ + + PURPOSE : draw text + +GW 10/02/03 SPR#1736 - Created +*/ +void scrCharOutput(t_font_bitmap* chrBmp, + unsigned int fCol,unsigned int bCol, + int x,int y, + int wChar, int hChar + ) +{ + int fHeight = dspl_GetFontHeight(); + int ofs = chrBmp->height - fHeight; + int width = chrBmp->width; + int i,j,k = 0; + int bitSet; + UBYTE mask; + int ofsj,nbytes; + unsigned int col; + int shiftj; + ofs = chrBmp->height - fHeight; + width = chrBmp->width; + k = 0; + for (i=0;i>3; + for (j=0;j> 3; + //Have we data for the bitmap ?. If not, output a blank line. + if (ofs >=0) + bitSet = chrBmp->bitmap[ofs*nbytes+ofsj]&(0x80>>shiftj); + else + bitSet = 0; + + if (bitSet) + col = fCol; + else + col = bCol; + if (col!=TRANSPARENT_32BIT_COLOUR) + { + if (!hChar) + scrPoint(k+x,i+y,col); + else + { + scrPoint(k+x,i*2+y,col); + scrPoint(k+x,i*2+1+y,col); + } + if (wChar) + { + if ((j>=1) && (j<=wChar)) + { //for j=1,2,3 - plot 2 pixels + k++; + if (!hChar) + scrPoint(k+x,i+y,col); + else + { + scrPoint(k+x,i*2+y,col); + scrPoint(k+x,i*2+1+y,col); + } + } + } + } + k++; + } + ofs++; + } +} + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : dspl_ScrText | ++--------------------------------------------------------------------+ + + PURPOSE : draw a line of ascii/unicode text + +GW 18/09/01 - Made invert flag local to file not procedure +GW 10/02/03 SPR#1721 Added code to call separate procedure if a border is required. + Removed existing 'border' code. +GW 14/02/03 SPR#1736 - Split code into separate procedures + Modified error display code to output ascii characters of the code if no + matching bitmap is found. +*/ +void dspl_ScrText (int x, int y, char *txt, int style) +{ + int nChar = 0; + int i, j, k; + t_font_bitmap* chrBmp; + t_font_bitmap* errBmp[2] = {NULL,NULL}; + int str1, str2; + int border = 0; + int shadow = 0; + int fHeight; + int wChar,hChar,shadowHt; + unsigned int fCol,bCol,borderCol,shadowCol,fColconv,bColconv; + unsigned int col; + int startX; + USHORT code; + + startX = x; + shadowCol = 0; + borderCol = 0; + border = dspl_getBorderWidth(); + //default to wide chars (for the moment) + if (style & TXT_STYLE_WIDECHAR) + wChar = 3; + else + wChar = 0; + if (style & TXT_STYLE_HIGHCHAR) + hChar = 1; + else + hChar = 0; + + //Set-up default colours + fCol = dspl_GetFgdColour(); + bCol = dspl_GetBgdColour(); + switch (style & TXT_STYLE_MASK) + { + case TXT_STYLE_NORMAL: //Normal + default: + break; + case TXT_STYLE_INVERT: //Invert + fCol = dspl_GetBgdColour(); + bCol = dspl_GetFgdColour(); + break; + case TXT_STYLE_HIGHLIGHT: //highlight - colour background of selected item in differently. + bCol = dspl_GetHighlightColour(); + break; + case TXT_STYLE_BORDER: // 1 pixelborder + if (border==0) + border = 1; + break; + case TXT_STYLE_2PIXEL_BORDER: // 2 pixelborder + if (border==0) + border = 2; + break; + case TXT_STYLE_3PIXEL_BORDER: // 3 pixelborder + if (border==0) + border = 3; + break; + case TXT_STYLE_4PIXEL_BORDER: // 4 pixelborder + if (border==0) + border = 4; + break; + case TXT_STYLE_SHADOW1: //shadow + shadow = 1; + break; + case TXT_STYLE_SHADOW2: //deeper shadow + shadow = 2; + break; + } + + if (fCol==bCol) + { + fCol = 0x00FF0000; + bCol = 0x0000FFFF; + } + if (border) + { + borderCol = dspl_GetBorderColour(); + if (borderCol == fCol) + { //A border colour the same as the text colour - get a contrasting colour + borderCol = dspl_GetContrastColour(fCol); + } + } + else + borderCol = 0; + + if (shadow) + shadowCol = dspl_GetShadowColour(); + else + shadowCol = 0; + + // SH - modified because it doesn't allow text to start off the screen + // GW - allow text to start off-screen but finish if completely off-screen + if (y > scrY) + return; + if (txt ==NULL) + return; + + fHeight = dspl_GetFontHeight(); + if (hChar) + shadowHt = fHeight*2; + else + shadowHt = fHeight; + + //For faster operation - precalculate colours +#ifdef DSAMPLE_COLOUR + if (fCol!=TRANSPARENT_32BIT_COLOUR) + fColconv = DSPL_GET_BITCOLOUR(fCol); + else + fColconv = fCol; + if (bCol!=TRANSPARENT_32BIT_COLOUR) + bColconv = DSPL_GET_BITCOLOUR(bCol); + else + bColconv = bCol; +#endif + code = 0xFFFF; + while ((code !=0) &&(x <= scrX)) + { + nChar++; + /*mc SPR 1319*/ + if (style &TXT_STYLE_UNICODE) + { + str1 = *txt; + str2 = *(txt+1); + code = ((str1<<8)&0xFF00) | (str2&0x00ff); + } + else/*mc end*/ + { + str1 = *txt; + str2 = 0x00; + /*SPR 1508, convert ASCII char to unicode before drawing it*/ + code = translation_ascii_2_unicode[*txt]; + } + if (code != 0) + { + chrBmp = get_bitmap(code); + if (chrBmp == NULL) + { + errBmp[0] = get_bitmap(str1); + errBmp[1] = get_bitmap(str2); + } +#ifdef MMI_TRACE + { + char bfr[40]; + if ((chrBmp==NULL) || (chrBmp->code==0xFFFF)) + { + sprintf(bfr,"Undefined bitmap for 0x%04X",code); + mmi_trace(bfr); + } + } +#endif + } + else //end of string reached + chrBmp =NULL; + if (chrBmp != NULL) + { + if (border) + { + scrCharBorderOutput(chrBmp,fCol,bCol,borderCol,border,x,y); + } +#ifdef DSAMPLE_COLOUR + else if ((!hChar) && (!wChar)) + { //GW 28/11/02 - for speed, don't use 'scrPoint' + //NB Code is only correct for a D-sample + scrFastCharOutput(chrBmp,fColconv,bColconv,x,y); + } +#endif //DSAMPLE_COLOUR + else + { + scrCharOutput(chrBmp,fCol,bCol,x,y,wChar,hChar); + } + x = x + chrBmp->width + wChar; //add 3 for 'wide' chars + //If there is a pixel border between chars at the moment - + x = x+border; + } + else if (code!=0) + { //We have no bitmap - display ascii equivalent + for (i=0;i<2;i++) + { if (errBmp[i]!= NULL) + { + scrCharOutput(errBmp[i],fCol,bCol,x,y,wChar,hChar); + x = x + errBmp[i]->width + wChar; + errBmp[i] = NULL; + } + } + } + /*MC SPR 1319*/ + if (style &TXT_STYLE_UNICODE) + txt+=2; + else + /*mc end*/ + txt++; + } + if (shadow) + { + for (i=0;i scrY) + return; + + + + while ((*txt) && (x + current_width <= scrX)) + { + current_code = (USHORT)((*txt)<<8)+(USHORT)((*txt)>>8);/*The USHORT is inverted, therefore we have to apply this simple change*/ + current_bitmap = get_bitmap(current_code); + if (!current_bitmap) /*ASCII codes will be represented*/ + { + first_byte_code = (USHORT)((*txt)&0xFF); + error_bitmap = get_bitmap(first_byte_code); + if (error_bitmap) + { + dspl_show_bitmap(x,y,error_bitmap,SHOWBITMAP_INVERT); + x += error_bitmap->width; + } + second_byte_code = (USHORT)((*txt)>>8); + error_bitmap = get_bitmap(second_byte_code); + if (error_bitmap) + { + dspl_show_bitmap(x,y,error_bitmap,SHOWBITMAP_INVERT); + x += error_bitmap->width; + } + + } + else + { + dspl_show_bitmap(x,y,current_bitmap,SHOWBITMAP_INVERT); + x += current_bitmap->width; + } + txt++; + } + +} + + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrText_Invert | ++--------------------------------------------------------------------+ + + PURPOSE : draw text inverted + +*/ + +void scrText_Invert (int x, int y, char *txt) +{ + //Display inverted text + dspl_ScrText (x,y, txt, TXT_STYLE_INVERT); +} + + +EXTERN UBYTE dspl_str_length(char * str) +{ + UBYTE count=0; + USHORT* current; + + if (dspl_get_char_type() == DSPL_TYPE_ASCII) + return (strlen(str)); + else + { + current = (USHORT*) str; + while (*current) + { + count++; + current++; + } + return count; + } +} + + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrLine | ++--------------------------------------------------------------------+ + + PURPOSE : draw line + +*/ + +void scrLine (int x1, int y1, int x2, int y2) +{ + int x, y, dx, dy, c1, c2, err, swap = 0; + U32 fCol; + + if (x1 < 0 || x1 >= scrX || x2 < 0 || x2 >= scrX || + y1 < 0 || y1 >= scrY || y2 < 0 || y2 >= scrY) + return; + fCol = dspl_GetFgdColour(); + dx = x2 - x1; dy = y2 - y1; + if (((dx < 0) ? -dx : dx) < ((dy < 0) ? -dy : dy)) + { + swap = 1; /* take the long way */ + x = x1; x1 = y1; y1 = x; + x = x2; x2 = y2; y2 = x; + } + if (x1 > x2) + { + x = x1; x1 = x2; x2 = x; /* always move to the right */ + y = y1; y1 = y2; y2 = y; + } + + dx = x2 - x1; dy = y2 - y1; + c1 = dy * 2; dy = 1; + if (c1 < 0) + { + c1 = -c1; + dy = -1; + } + err = c1 - dx; c2 = err - dx; + x = x1; y = y1; + while (x <= x2) + { + scrPoint(swap?y:x,swap?x:y,fCol); + x++; + if (err < 0) + err += c1; + else + { + y += dy; + err += c2; + } + } + + if (internal) + return; +} + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrRect | ++--------------------------------------------------------------------+ + + PURPOSE : draw rectangle + +*/ + +void scrRect (int px, int py, int sx, int sy) +{ + internal = 1; + scrLine(px,py,px+sx,py); + scrLine(px,py+sy,px+sx,py+sy); + scrLine(px,py,px,py+sy); + internal = 0; + scrLine(px+sx,py,px+sx,py+sy); +} + + + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrFntSelect | ++--------------------------------------------------------------------+ + + PURPOSE : select the current font + +*/ + +int scrFntSelect (int font) +{ + return 1; /* always OK */ +} + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrFntHeight | ++--------------------------------------------------------------------+ + + PURPOSE : get height of current font + +*/ + +int scrFntHeight (void) +{ +#ifdef LSCREEN + return 16; +#endif + + if (dspl_char_type == DSPL_TYPE_ASCII) + return 8; + else + return 12; +} + + + +//Really get information about +// (1) how many chars we can have on a line +// (2) how many pixels are in a string +//GW SPR#1721 - Include a border in the calculations +int scrGetRealLength(char *str, int* totChar, int* totPixel) +{ + int nChar=0; + int nPixel=0; + int maxChar,maxPixel; + t_font_bitmap* bmp; + int strEnd; + USHORT str16,str1,str2; + UBYTE current_display_char_type = dspl_char_type;/*mc SPR 1319*/ + int border; + + //Calculate extra pixels allowed for the border + border = dspl_getBorderWidth(); + + if (*totChar<=0) //assume full str required. + maxChar = 256; //stop after 256 chars + else + maxChar = *totChar; //stop after 256 chars + if (*totPixel<=0)// assume no limit to len - limit at 2x screen + maxPixel = 2*scrX; + else + maxPixel = *totPixel; + strEnd = FALSE; + /*MC SPR 1319, char type is unicode if unicode tag*/ + if(str[0] == 0x80) + { current_display_char_type = DSPL_TYPE_UNICODE; + str+=2; /*ignore first char SPR 1442*/ + nChar+=2;/*MC*/ + } + else /*SPR 1526, assume if no unicode tag, we're in ASCII*/ + current_display_char_type = DSPL_TYPE_ASCII; + /*MC 1526, end*/ + while (!strEnd) + { + if (current_display_char_type == DSPL_TYPE_ASCII) + { + str16 = *str; + str++; + } + else + { + str1 = *str; + str++; + str2 = *str; + str++; + str16 = ((str1 << 8) & 0xFF00) + (str2 & 0x00FF);/*MC, fixed bitmask 1319*/ + + } + if (str16 == 0) + { //reached end of string. + strEnd = TRUE; + bmp = NULL; + } + else + bmp = get_bitmap(str16); + if (bmp!= NULL) + { + if (nPixel +bmp->width < maxPixel) + { + nPixel = nPixel + bmp->width+border; + if (current_display_char_type == DSPL_TYPE_ASCII) + nChar++; + else + nChar+=2; + if (nChar >= maxChar) + strEnd = TRUE; + } + else + strEnd=TRUE; + } + } + *totChar = nChar; + *totPixel = nPixel; + + return (nPixel); +} + + + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrFntGetFit | ++--------------------------------------------------------------------+ + + PURPOSE : number of string chars that fit into the line + +*/ + + +int scrFntGetFit (char *tp, int lineWidth) +{ + int totChar = 0; + +// scrGetRealLength(tp, &totChar, &lineWidth); +// return (totChar); + + + if (dspl_char_type == DSPL_TYPE_ASCII) + return (lineWidth /6); + else + return (lineWidth / 12); +} + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrFntGetLen | ++--------------------------------------------------------------------+ + + PURPOSE : number of pixel used by first n string chars + +*/ + + + + +int scrFntGetLen(char *tp, int nChars) +{ + int lineWidth = 0; + + + int count=0; + + if (dspl_char_type == DSPL_TYPE_ASCII) + return (nChars * 6); + else + { + USHORT* temp = (USHORT*)tp; + + while (*temp) + { + UBYTE first_byte = (UBYTE)(*temp); + if (first_byte) + count+=12; + else + count+=6; + temp++; + } + return count; + } +} + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrBmpDraw | ++--------------------------------------------------------------------+ + + PURPOSE : draw bitmap + +*/ + +int scrBmpDraw (int px, int py, int sx, int sy, + int ix, char *bm, int mode) +{ + int i, j; + unsigned char m; + + if (px < 0 || px >= scrX || py < 0 || py >= scrY + || sx < 0 || sy < 0) + return 0; + if (px + sx > scrX) + sx = scrX - px; + if (py + sy > scrY) + sy = scrY - py; + + m = 0x80; + bm += (sx * sy * ix) / 8; + for (j = 0; j < sy; j++) + { + for (i = 0; i < sx; i++) + { + scrPoint(px+i,py+j,*bm & m); + m >>= 1; + if (!m) + { + m = 0x80; + bm++; + } + } + if (m != 0x80) + { + m = 0x80; + bm++; + } + } + + return 0; +} + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrCurType | ++--------------------------------------------------------------------+ + + PURPOSE : set cursor type (0 = no cursor) + +*/ + +void scrCurType (int type) +{ +} + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrCursor | ++--------------------------------------------------------------------+ + + PURPOSE : set cursor at specified position + +*/ + +void scrCursor (int x, int y) +{ + scrLine(x,y+7,x+5,y+7); +} + + +/* ++--------------------------------------------------------------------+ +| PROJECT : MMI-Framework (8417) MODULE : ti1_scr | +| STATE : code ROUTINE : scrPoint | ++--------------------------------------------------------------------+ + + PURPOSE : draw point + +*/ + +//Return colour of pixel at point (px,py) or zero if not on screen. +static int getScrPoint (int px, int py) +{ +#ifdef BSAMPLE + unsigned char m = 0x80; +#endif //BSAMPLE +#ifdef CSAMPLE + U32 m2; +#endif //CSAMPLE + int x1,y1; + int lWord; // index for colour word + U32 opWord; //olour word + U32 op_col; + U32 picCol; + + if (px < 0 || py < 0 || px >= scrX || py >= scrY) + return (0); + +#ifdef BSAMPLE + m >>= px & 7; // mask + px >>= 3; // x offset + if (displayScr[py][px] & m) + return (0x00FFFFFF); + else + return (0x00000000); + +#endif //BSAMPLE + +#ifdef CSAMPLE + //Display plots data from Right to Left + // - reverse x-coordinate + //Also display seems to be 16 pixels down the screen - + //plot points at y=(y-16) mod 64 + x1 = (scrX-1)-px; + y1 = (py+48) & 63; //(py-16) ; + //Display is in columns for TI drivers + m2 = 0x80000000; + m2 = m2 >> (y1 & 31); //shift m2 by 0-31 + y1 = y1 >> 5; // 32bits/word + return (picture_bw[lWord] & m2); +#endif //CSAMPLE + +#ifdef DSAMPLE_COLOUR + //i/p colour is 32 bit - reduce to 16 + x1 = px; + y1 = py; + lWord = y1*LCD_ROW_NUM_LWORDS + x1; + //GW invert pic bits + opWord = ~picture_col[lWord]; + + //Change from 16(8) bits to 32(24) bits +#ifdef DSAMPLE_COLOUR32 + opWord = opWord & 0x0000FFFF; +#endif //DSAMPLE_COLOUR32 +#ifdef DSAMPLE_COLOUR16 +#ifdef PIXEL_0_IN_LSW + if (lWord & 0x01) + opWord = ((opWord >>16) & 0x0000FFFF); + else + opWord = ((opWord ) & 0x0000FFFF); +#else + if (lWord & 0x01) + opWord = ((opWord ) & 0x0000FFFF); + else + opWord = ((opWord >>16) & 0x0000FFFF); +#endif +#endif //DSAMPLE_COLOUR16 + return(DSPL_GET_PIXELCOLOUR(opWord)); +#endif //DSAMPLE_COLOUR + +#ifdef DSAMPLE_LITE + //i/p colour is 32 bit - reduce to 16 + { + int xmask; + x1 = px; + y1 = py; + lWord = DSPL_GET_LWORD(x1,y1); //y1*LCD_ROW_NUM_LWORDS + x1 >> 5; + xmask = 0x01 << (x1 & 0x1F); + //GW invert pic bits + if (picture_bw[lWord] & xmask) + opWord = 0x00FFFFFF; + else + opWord = 0x00000000; + //Change from 16(8) bits to 32(24) bits + } + return (opWord); +#endif //DSAMPLE_LITE + +} + + +static int checkPixelColour(int px, int py, U32 col) +{ + U32 currCol; + + currCol = getScrPoint (px, py); + if ((currCol & 0x00F8FCF8) == (col & 0x00F8FCF8))//16bit colour + return (1); //colours match + else + return (0); //colours are different +} + +unsigned int translucence(unsigned int ipCol,unsigned int picCol) +{ + int trans1,trans2; + U32 col_red1,col_green1,col_blue1; + U32 col_red2,col_green2,col_blue2; + U32 rmerge,gmerge,bmerge; + U32 opCol; + + //0xFF=transparent (col=picCol) + //0x00=solid (col=ipCol) + trans1 = (ipCol >>24) & 0xFF; + trans2 = 255-trans1; + if (trans1 == 0x00) + return (ipCol); + else if (trans1 == 0xFF) + return (picCol); + + //Read in colour from 24 bits + col_red1 = (ipCol & 0x00FF0000) >> 8; + col_green1 = (ipCol & 0x0000FF00) >> 8; + col_blue1 = (ipCol & 0x000000FF); + + //Read in colour from 8 bits + col_red2 = (picCol & 0x00FF0000) >> 8; + col_green2 = (picCol & 0x0000FF00) >> 8; + col_blue2 = (picCol & 0x000000FF); + //red = 0x0000xx00, green = 0x000000xx, blue = 0x000000xx (256x higher than it should be) + + //Round values up +// rmerge = (col_red1 *trans1+col_red2 *trans2+0x0FFFF) & 0x00FF0000; +// gmerge = (col_green1*trans1+col_green2*trans2+0x000FF) & 0x0000FF00; +// bmerge =((col_blue1 *trans1+col_blue2 *trans2+0x000FF) >> 8)& 0x000000FF; + rmerge = (col_red1 *trans2+col_red2 *trans1+0x1F0000) & 0x00FF0000; + gmerge = (col_green1*trans2+col_green2*trans1+0x001000) & 0x0000FF00; + bmerge =((col_blue1 *trans2+col_blue2 *trans1+0x001000) >> 8)& 0x000000FF; + + opCol = rmerge|gmerge|bmerge; + return (opCol); +} + + +#ifdef BSAMPLE +static void scrPoint (int px, int py, int col) +{ + unsigned char m = 0x80; + + //GW Do not plot if outside of the defined window + if (px < win_x1 || py < win_y1 || px >= win_x2 || py >= win_y2) + return; + + m >>= px & 7; // mask + px >>= 3; // x offset + + if (col) + displayScr[py][px] |= m; + else + displayScr[py][px] &= (UBYTE) ~m; +} +#endif //BSAMPLE + +#ifdef CSAMPLE +static void scrPoint (int px, int py, int col) +{ + U32 m2; + int x1,y1; + int lWord; // index for colour word + if (px < win_x1 || py < win_y1 || px >= win_x2 || py >= win_y2) + return; + //Display plots data from Right to Left + // - reverse x-coordinate + //Also display seems to be 16 pixels down the screen - + //plot points at y=(y-16) mod 64 + x1 = (scrX-1)-px; + y1 = (py+48) & 63; //(py-16) ; + //Display is in columns for TI drivers + m2 = 0x80000000; + m2 = m2 >> (y1 & 31); //shift m2 by 0-31 + y1 = y1 >> 5; // 32bits/word + lWord = x1*LCD_COL_NUM_LWORDS+y1; + if (col) + picture_bw[lWord] |= m2; + else + picture_bw[lWord] &= (U32)(~m2); +} +#endif //CSAMPLE + +#ifdef DSAMPLE_COLOUR +void scrPoint (int px, int py, int col) +{ + int lWord; // index for colour word + U32 bitCol; + //i/p colour is 32 bit + if (px < win_x1 || py < win_y1 || px >= win_x2 || py >= win_y2) + return; + lWord = DSPL_GET_LWORD(px,py); + bitCol = DSPL_GET_BITCOLOUR(col); + DSPL_SET_BITCOLOUR(px,lWord,bitCol,"plot"); +} +#endif //DSAMPLE_COLOUR + +#ifdef DSAMPLE_LITE +void scrPoint (int px, int py, int col) +{ + int m_px; + int word ; + //i/p colour is 32 bit + if (px < win_x1 || py < win_y1 || px >= win_x2 || py >= win_y2) + return; + + m_px = 1 << (px & 0x1F); + word = DSPL_GET_LWORD(px,py); + if (col) + picture_bw[word] = picture_bw[word] | m_px; + else + picture_bw[word] = picture_bw[word] & (~m_px); +} +#endif //DSAMPLE_LITE + + + +/******************************************************************* + * * + * PART III: LCD Simulation for Windows * + * * + *******************************************************************/ +#if defined (WIN32) + +#define LCDE_COL 20 +#define LCDE_ROW 4 +static int screensize_x = 16; +static int screensize_y = 4; + +#define NULL_TERM '\0' /* string termination */ + +static CHAR lcd_screen [LCDE_ROW+2][LCDE_COL+3]; +static CHAR cursor_line[LCDE_COL+3]; + +static int lcd_cursX, lcd_cursY, lcd_enabled = FALSE; + +LOCAL void LCD_Refresh (void) +{ + int i; + CHAR buf[100]; + + for (i=0; i screensize_x) + { + /* clip the string */ + s[(len = screensize_x-col)] = NULL_TERM; + } + memcpy (&lcd_screen[row+1][col+1], s, len); + LCD_Refresh (); + } + } +} + +GLOBAL void LCD_Cursor (int row, int col) +{ + if (lcd_enabled) + { + if (row < screensize_y AND col < screensize_x) + { + lcd_cursY = row; + lcd_cursX = col; + LCD_Refresh (); + } + } +} + +GLOBAL void LCD_SetPower (void) +{ +} + +GLOBAL void LCD_PixBlt (int x, int y, int w, int h, char *bmp) +{ +} + +/* + * Stimulation of the lcd driver + */ +GLOBAL void lcd_test (UBYTE mode) +{ + TRACE_EVENT ("Display Redirection activated"); + mtkEnabled = mode; + scrInit(); + if (mtkEnabled EQ 2) + { + scrY = 64; + } +} +#endif /* WIN32 */ + +//Sept 15, 2005 REF: LOCOSTO-ENH-34257 - xpradipg +//New function added to control the refreshing of the LCD +/******************************************************************************* + + $Function: dspl_refresh + $Description: controls the refresh of the LCD from MMI + $Returns: the current status of refresh + $Arguments: State - indicating the state to be set to. + +*******************************************************************************/ +int dspl_control(int state) +{ + // Nov 04, 2005 DR: OMAPS00052595 +#ifndef _SIMULATION_ + + +#ifdef FF_MMI_NEW_LCD_API_MIG + static BOOL refresh_status = DSPL_ACCESS_ENABLE; + T_LCD_REFCONTROL status; + TRACE_EVENT_P1("dspl_referesh() - state =>%d",state); + + + if(state == refresh_status) + return refresh_status; +// Nov 02, 2005 DR: OMAPS00051051 - xpradipg +// Check for the state is made before the assignment + if( state != DSPL_ACCESS_QUERY) + refresh_status = state; +#endif + + switch(state) + { + case DSPL_ACCESS_DISABLE: +#ifdef FF_MMI_NEW_LCD_API_MIG + status = REF_DISABLED; + TRACE_EVENT("calling lcd_control with disable lcd"); + lcd_control(DISPLAY_MAIN_LCD,LCD_REFCONTROL, (void *)&status); + return refresh_status; +#endif + case DSPL_ACCESS_ENABLE: +#ifdef FF_MMI_NEW_LCD_API_MIG + status = REF_ENABLED; + TRACE_EVENT("calling lcd_control with disable lcd"); + lcd_control(DISPLAY_MAIN_LCD,LCD_REFCONTROL, (void *)&status); +#else + r2d_g_refresh_disabled = state; +#endif + case DSPL_ACCESS_QUERY: + default: +#ifdef FF_MMI_NEW_LCD_API_MIG + return refresh_status; +#else + return r2d_g_refresh_disabled; +#endif + } +#else + return 0; +#endif + +} + +#endif /* MMI != 0 */