freecalypso-tools Changelog

[default] fc-shell TCH DL handler: add support for CSD modes

Tue, 26 Nov 2024 06:27:43 +0000

changeset	961efadd530a
branch	default
bookmark
tag	tip
user	Mychaela Falconia <falcon@freecalypso.org>
description	fc-shell TCH DL handler: add support for CSD modes TCH DL capture mechanism in FC Tourmaline firmware has been extended to support CSD modes in addition to speech - add the necessary support on the host tools side. It needs to be noted that this mechanism in its present state does NOT provide the debug utility value that was sought: as we learned only after the code was implemented, TI's DSP has a misfeature in that the buffer we are reading (a_dd_0[]) is zeroed out when the IDS block is enabled, i.e., we are reading all zeros and not the real DL bits we were after. But since the code has already been written, we are keeping it - perhaps we can do some tests with IDS disabled.
files	rvinterf/asyncshell/tchcmd.c

Mon, 23 Sep 2024 12:28:57 +0000

changeset	bc4dc383ff4a
branch
bookmark
tag
user	Mychaela Falconia <falcon@freecalypso.org>
description	doc/Loadtools-usage: list SE J110/120 pair properly These two Chi-Mei phones are variants of the same design with only minor diffs.
files	doc/Loadtools-usage

Mon, 23 Sep 2024 12:23:20 +0000

changeset	11391cb6bdc0
branch
bookmark
tag
user	Mychaela Falconia <falcon@freecalypso.org>
description	patch from fixeria: doc change from SE K2x0 to K2xx Since their discovery in late 2022, Sony Ericsson K200 and K220 phones were collectively referred to as SE K2x0 in FreeCalypso documentation. However, now that SE K205 has been discovered as yet another member of the same family (same PCBA in different case), it makes more sense to refer to the whole family as SE K2xx.
files	doc/Flash-write-protection doc/Loadtools-usage doc/SE-K2x0-FFS doc/SE-K2xx-FFS doc/TIFFS-IVA-usage loadtools/loadtool.help

Thu, 23 May 2024 17:29:57 +0000

changeset	6d9b10633f10
branch
bookmark
tag
user	Mychaela Falconia <falcon@freecalypso.org>
description	etmsync Pirelli IMEI retrieval: fix poor use of printf() Bug reported by Vadim Yanitskiy : the construct where a static-allocated string was passed to printf() without any format arguments causes newer compilers to report a security problem. Given that formatted output is not needed here, just fixed string output, change printf() to fputs(), and direct the error message to stderr while at it.
files	rvinterf/etmsync/pirimei.c

Tue, 12 Dec 2023 07:45:56 +0000

changeset	1d144553a5d0
branch
bookmark
tag
user	Mychaela Falconia <falcon@freecalypso.org>
description	CHANGES: fc-host-tools-r21 about to be released
files	CHANGES

Tue, 12 Dec 2023 06:57:11 +0000

changeset	4a153059abbb
branch
bookmark
tag
user	Mychaela Falconia <falcon@freecalypso.org>
description	doc/DUART28-boot-control: update for fc-linux-patch and fc-usbser-tools
files	doc/DUART28-boot-control

Sun, 10 Dec 2023 23:42:12 +0000

changeset	2b4c3e0f73fc
branch
bookmark
tag
user	Mychaela Falconia <falcon@freecalypso.org>
description	doc/High-speed-serial: update for current situation
files	doc/High-speed-serial

Sun, 10 Dec 2023 01:24:14 +0000

changeset	85ea82ce21d5
branch
bookmark
tag
user	Mychaela Falconia <falcon@freecalypso.org>
description	CHANGES: document Installed-binaries
files	CHANGES

Sun, 10 Dec 2023 00:56:31 +0000

changeset	c3837867f631
branch
bookmark
tag
user	Mychaela Falconia <falcon@freecalypso.org>
description	Installed-binaries: new standardized packaging aid
files	Installed-binaries

Sat, 09 Dec 2023 18:54:28 +0000

changeset	9172c2c9bd3e
branch
bookmark
tag
user	Mychaela Falconia <falcon@freecalypso.org>
description	CHANGES: document -h target changes
files	CHANGES