# HG changeset patch
# User Mychaela Falconia <falcon@freecalypso.org>
# Date 1580451490 0
# Node ID 4a199ff4b23f841633d2e9f7c5f424462e199ab8
# Parent  42ba9f015d4c7a5afc27442ae7fdb32af64b9140
loadtools/scripts/gta02.config: use WS=4 for consistency
with generic configs which also work on GTA02 and GTA01 targets

diff -r 42ba9f015d4c -r 4a199ff4b23f loadtools/scripts/gta02.config
--- a/loadtools/scripts/gta02.config	Fri Jan 31 05:51:07 2020 +0000
+++ b/loadtools/scripts/gta02.config	Fri Jan 31 06:18:10 2020 +0000
@@ -6,13 +6,11 @@
 exit-mode gta02-cutpwr
 
 # The following parameters go into the <p command sent to the boot ROM
-# same values as in pirelli.config, apparently correct for this modem too
+pll-config 4/1		# 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz
+rhea-cntl 0x00		# good for all Calypso platforms
 
-pll-config 4/1		# 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz
-rhea-cntl 0x00		# fastest setting, used by OsmocomBB, presumably correct
-
-# Configure memory timings with loadagent commands
-init-script k5a3281.init
+# Configure MEMIF with loadagent commands
+init-script basic-4ws-4mb.init
 
 # Flash access mapping
 flash single-4M 0x03000000