# HG changeset patch # User Mychaela Falconia # Date 1702364231 0 # Node ID 4a153059abbb24b1a23b938de4db91fbcce0a356 # Parent 2b4c3e0f73fc6d995cebc4814d0cad27c887498c doc/DUART28-boot-control: update for fc-linux-patch and fc-usbser-tools diff -r 2b4c3e0f73fc -r 4a153059abbb doc/DUART28-boot-control --- a/doc/DUART28-boot-control Sun Dec 10 23:42:12 2023 +0000 +++ b/doc/DUART28-boot-control Tue Dec 12 06:57:11 2023 +0000 @@ -70,13 +70,9 @@ For the next several decades until these maintainers retire of old age and get replaced by someone more reasonable and cooperative, our only available solution -is to apply the necessary patch locally on our own systems. +is to apply the necessary patch locally on our own systems: -For those FreeCalypso DUART28 users who are like the Mother, desiring to use -the boot control feature now without waiting indefinitely for Linux kernel -maintainers to get their act together, the linux-patch directory in our -freecalypso-hwlab Hg repository contains several versions of our DUART28C -support patch that are meant to be applied locally by end users. +https://www.freecalypso.org/hg/fc-linux-patch/ EEPROM configuration ==================== @@ -92,8 +88,10 @@ If you have applied our DUART28C support patch to your ftdi_sio driver, then you can reprogram the EEPROM on your board into the C configuration and start -using CTL outputs. The necessary EEPROM config files and tools can be found in -our freecalypso-hwlab Hg repository. +using CTL outputs. You will need to use fc-duart28-conf utility, maintained as +part of our fc-usbser-tools package: + +https://www.freecalypso.org/pub/GSM/FreeCalypso/fc-usbser-tools-latest.tar.bz2 Support in FC host tools ========================