view loadtools/flashid.c @ 619:f82551c77e58

libserial-newlnx: ASYNC_LOW_LATENCY patch reverted Reports from Das Signal indicate that loadtools performance on Debian is about the same as on Slackware, and that including or omitting the ASYNC_LOW_LATENCY patch from Serg makes no difference. Because the patch in question does not appear to be necessary, it is being reverted until and unless someone other than Serg reports an actual real-world system on which loadtools operation times are slowed compared to the Mother's Slackware reference and on which Slackware-like performance can be restored by setting the ASYNC_LOW_LATENCY flag.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 27 Feb 2020 01:09:48 +0000
parents f229efbfd581
children 54a0bc149d9c
line wrap: on
line source

/*
 * Flash device detection code lives here
 */

#include <sys/types.h>
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
#include "flash.h"

extern struct flash_device flashdev_28F160C3T;
extern struct flash_device flashdev_28F320C3T;
extern struct flash_device flashdev_28F640C3T;
extern struct flash_device flashdev_28F640C3B;
extern struct flash_device flashdev_28F640W30T;
extern struct flash_device flashdev_28F640W30B;
extern struct flash_device flashdev_Am29DL640G;
extern struct flash_device flashdev_PL032J;
extern struct flash_device flashdev_PL129J;
extern struct flash_device flashdev_PL129N;
extern struct flash_device flashdev_K5A32xx_T;
extern struct flash_device flashdev_K5L33xx_A;

extern int flash_global_config;
extern struct flash_bank_info flash_bank_info[2];

static
run_cfi_check(bi, table)
	struct flash_bank_info *bi;
	struct cfi_check *table;
{
	struct cfi_check *tp;
	uint16_t rdword;

	for (tp = table; tp->offset >= 0; tp++) {
		if (do_r16(bi->base_addr + (tp->offset << 1), &rdword) < 0)
			return(-1);
		if (rdword != tp->expect_val)
			return(0);
	}
	return(1);
}

static
try_device(bi, dev)
	struct flash_bank_info *bi;
	struct flash_device *dev;
{
	int rc;

	printf("Appears to be %s or compatible, checking CFI\n", dev->name);
	if (do_w16(bi->base_addr + 0xAA, 0x98)) {
		fprintf(stderr, "unexpected response to w16 - aborting\n");
		return(-1);
	}
	rc = run_cfi_check(bi, dev->cfi_table);
	if (rc < 0)
		return(rc);
	if (!rc) {
		fprintf(stderr, "Error: CFI mismatch, unsafe to continue\n");
		return(-1);
	}
	printf("Confirmed %s or compatible\n", dev->name);
	bi->device = dev;
	return(0);
}

static
spansion_pl129j_or_n(bi)
	struct flash_bank_info *bi;
{
	int rc;

	printf("Spansion PL129J or PL129N, looking at CFI\n");
	/* need to go back to read array first, CFI cmd ignored otherwise */
	if (do_w16(bi->base_addr + 0xAAA, 0xF0)) {
bad_w16:	fprintf(stderr, "unexpected response to w16 - aborting\n");
		return(-1);
	}
	if (do_w16(bi->base_addr + 0xAAA, 0x98))
		goto bad_w16;
	rc = run_cfi_check(bi, flashdev_PL129N.cfi_table);
	if (rc < 0)
		return(rc);
	if (rc) {
		printf("Found PL129N\n");
		bi->device = &flashdev_PL129N;
		return(0);
	}
	rc = run_cfi_check(bi, flashdev_PL129J.cfi_table);
	if (rc < 0)
		return(rc);
	if (rc) {
		printf("Found PL129J\n");
		bi->device = &flashdev_PL129J;
		return(0);
	}
	fprintf(stderr, "Error: no matching CFI found\n");
	return(-1);
}

static
amd_extended_id(bi)
	struct flash_bank_info *bi;
{
	uint16_t ext1, ext2;

	printf("AMD-style extended ID device, reading extended ID\n");
	if (do_r16(bi->base_addr + 0x1C, &ext1) < 0)
		return(-1);
	if (do_r16(bi->base_addr + 0x1E, &ext2) < 0)
		return(-1);
	printf("Extended ID: %04X %04X\n", ext1, ext2);
	if (ext1 == 0x2221 && ext2 == 0x2200)
		return spansion_pl129j_or_n(bi);
	if (ext1 == 0x2202 && ext2 == 0x2201)
		return try_device(bi, &flashdev_Am29DL640G);
	if (ext1 == 0x220A && ext2 == 0x2201)
		return try_device(bi, &flashdev_PL032J);
	fprintf(stderr, "Error: unknown device ID\n");
	return(-1);
}

static
samsung_extended_id(bi)
	struct flash_bank_info *bi;
{
	uint16_t ext1, ext2;

	printf("Samsung extended ID device, reading extended ID\n");
	if (do_r16(bi->base_addr + 0x1C, &ext1) < 0)
		return(-1);
	if (do_r16(bi->base_addr + 0x1E, &ext2) < 0)
		return(-1);
	printf("Extended ID: %04X %04X\n", ext1, ext2);
	if (ext1 == 0x2503 && ext2 == 0x2501)
		return try_device(bi, &flashdev_K5L33xx_A);
	fprintf(stderr, "Error: unknown device ID\n");
	return(-1);
}

static struct idmap {
	uint16_t	manuf_id;
	uint16_t	dev_id;
	int		(*handler)();
	void		*extra_arg;
} device_id_table[] = {
	/* AMD/Spansion devices */
	{0x0001, 0x227E, amd_extended_id, 0},
	/* 28F160C3T and 28F320C3T equivalents found in some Mot C1xx phones */
	{0x0020, 0x88BA, try_device, &flashdev_28F320C3T},
	{0x0020, 0x88CE, try_device, &flashdev_28F160C3T},
	/* Intel flash chips */
	{0x0089, 0x8854, try_device, &flashdev_28F640W30T},
	{0x0089, 0x8855, try_device, &flashdev_28F640W30B},
	{0x0089, 0x8864, try_device, &flashdev_28F640W30T},
	{0x0089, 0x88C2, try_device, &flashdev_28F160C3T},
	{0x0089, 0x88C4, try_device, &flashdev_28F320C3T},
	{0x0089, 0x88CC, try_device, &flashdev_28F640C3T},
	{0x0089, 0x88CD, try_device, &flashdev_28F640C3B},
	/* Samsung flash */
	{0x00EC, 0x22A0, try_device, &flashdev_K5A32xx_T},
	{0x00EC, 0x257E, samsung_extended_id, 0},
	/* table search terminator */
	{0,      0,      0,          0}
};

flash_detect(bank, repeat)
{
	struct flash_bank_info *bi;
	uint16_t manuf_id, dev_id;
	struct idmap *tp;
	int rc;

	bi = flash_bank_info + bank;
	if (bi->detect_done && !repeat)
		return(0);
	printf("Autodetecting flash chip type\n");
	if (do_w16(bi->base_addr + 0xAAA, 0xAA)) {
bad_w16:	fprintf(stderr,
	"unexpected response to w16 in read ID cmd sequence - aborting\n");
		return(-1);
	}
	if (do_w16(bi->base_addr + 0x554, 0x55))
		goto bad_w16;
	if (do_w16(bi->base_addr + 0xAAA, 0x90))
		goto bad_w16;
	if (do_r16(bi->base_addr, &manuf_id) < 0)
		return(-1);
	if (do_r16(bi->base_addr + 2, &dev_id) < 0)
		return(-1);
	printf("Basic device ID: %04X %04X\n", manuf_id, dev_id);
	for (tp = device_id_table; tp->handler; tp++)
		if (tp->manuf_id == manuf_id && tp->dev_id == dev_id)
			break;
	if (!tp->handler) {
		fprintf(stderr, "Error: unknown device ID\n");
		return(-1);
	}
	rc = tp->handler(bi, tp->extra_arg);
	if (rc < 0)
		return(rc);
	/* got the device, see if it is compatible with global config */
	if (bi->device->required_global_config > flash_global_config) {
		fprintf(stderr,
"Error: detected flash device is not compatible with the configured mapping\n");
		return(-1);
	}
	/* good to go */
	if (bi->device->bank_geom[1] && bank)
		bi->geom = bi->device->bank_geom[1];
	else
		bi->geom = bi->device->bank_geom[0];
	bi->ops = bi->device->cmdset;
	bi->detect_done = 1;
	/* return device to read array mode */
	return bi->ops->reset_cmd(bi);
}