view openmoko/flash-modem.sh @ 788:f3fc782b5e88

CHANGES: post-r14 begins with simagent
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 14 Mar 2021 00:07:25 +0000
parents 8bea9cdd8a89
children
line wrap: on
line source

#!/bin/sh

# This script shows how to flash an Openmoko modem (GTA01/02) with a new
# firmware image (in either *.m0 or *.bin format) in a fully automated manner
# using the new batch mode of fc-loadtool, running from inside the phone.
# This script should be used as a starting point by anyone who may be putting
# together an automated firmware update mechanism similar to OM's uSD card
# automated flasher.
#
# The flashing commands used here are correct ONLY for Openmoko and similar
# modems, _NOT_ for Motorola C1xx phones!!!  If you use these commands on a
# Mot C1xx phone, you will unrecoverably brick it!

if [ $# != 1 ]
then
	echo "usage: $0 firmware-image-file" 1>&2
	exit 1
fi

case "$1" in
	*.bin)
		BATCH_CMD="flash e-program-bin 0 $1"
		;;
	*.m0)
		BATCH_CMD="flash e-program-m0 $1"
		;;
	*)
		echo "error: format of $1 not recognized" 1>&2
		exit 1
esac

/opt/freecalypso/bin/fc-loadtool -h fic -Plm -t1300 /dev/ttySAC0 $BATCH_CMD