# The present hw parameter file is a minimal config that is appropriate to use
# if the target is known to have a Calypso C05 chip in it but nothing else is
# known, not even the ABB type.  This minimal config is not usable for flash
# manipulation or for fc-xram, but it may be useful for fc-iram or low-level
# (non-flash) fc-loadtool operations.

# The following parameters go into the <p command sent to the boot ROM
pll-config 3/1		# ARM @ 39 MHz, PLL&DSP @ 78 MHz if 26 MHz in
rhea-cntl 0x00		# good for all Calypso platforms