fc-loadtool flash ID check: change of reset after the check logic This change only affects those flash configurations that have ID checks enabled. The logic for resetting the flash after the ID check has been changed as follows: 1) If the check fails, we return without attempting to reset the flash. 2) If the check is successful, we reset the flash using the configured method (could be AMD or Intel or Intel W30) instead of always doing an AMD flash reset as the original code did.

#include "halt.h"

	.text
	.code	32
	.global	_entry
_entry:
	ldr	sp, =stack_bottom
@ zero bss
	ldr	r0, =__bss_start
	ldr	r2, =__bss_end
	sub	r1, r2, r0
	bl	bzero
@ C code entry
	bl	main
	mov	r0, #HALTCODE_MAINEXITED
	.global	_exit
_exit:	nop
1:	nop
	b	1b