fc-loadtool flash ID check: change of reset after the check logic This change only affects those flash configurations that have ID checks enabled. The logic for resetting the flash after the ID check has been changed as follows: 1) If the check fails, we return without attempting to reset the flash. 2) If the check is successful, we reset the flash using the configured method (could be AMD or Intel or Intel W30) instead of always doing an AMD flash reset as the original code did.

	.text
	.globl	_entry
_entry:
	.code	16
	bx	pc
	nop

	.code	32
	stmfd	sp!, {r0-r12,lr}
	mrs	r0, CPSR
	mov	r1, sp
	/* supervisor mode, disable all interrupts */
	msr	CPSR_c, #0xd3
	ldr	sp, =stack_bottom
	/* save entry SP and CPSR */
	ldr	r2, =lldbg_entry_cpsr
	str	r0, [r2]
	ldr	r2, =lldbg_entry_sp
	str	r1, [r2]
	b	main