FreeCalypso > hg > freecalypso-tools
view loadtools/scripts/c05i.config @ 716:3713a349fb1e
doc/Loadtools-usage: Mot V17x documented
Mot V17x is equivalent to C155/156 for loadtools purposes, but this fact
needs to be documented, as it may not be obvious to those who are not
as deeply involved.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Wed, 01 Jul 2020 00:31:37 +0000 |
parents | 8f84b26bd111 |
children |
line wrap: on
line source
# The present hw parameter file is a minimal config that is appropriate to use # if the target is known to have a Calypso C05 chip and a Iota ABB chip, but # nothing else is known. This minimal config is not usable for flash # manipulation or for fc-xram, but it may be useful for fc-iram or low-level # (non-flash) fc-loadtool operations. This config is also a good choice for # fc-buzplay and fc-dspromdump. # The following parameters go into the <p command sent to the boot ROM pll-config 3/1 # ARM @ 39 MHz, PLL&DSP @ 78 MHz if 26 MHz in rhea-cntl 0x00 # good for all Calypso platforms # Perform a Iota poweroff when we are done exit-mode iota-off