view rvinterf/asyncshell/tchcmd.c @ 407:19e5a3e2f9c0

fcup-settime: moved time() retrieval a little closer to the output A fundamental problem with all simple time transfer tools is that there is always some delay between the time retrieval on the source system and that transmitted time being set on the destination, and the resulting time on the destination system is off by that delay amount. This delay cannot be fully eliminated when working in a simple environment like ours, but we should make our best effort to minimize it. In the present case, moving the atinterf_init() call before the time() retrieval should make a teensy-tiny improvement.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 11 Aug 2018 21:52:17 +0000
parents d43d82cbfb85
children 8171c5c0d804
line wrap: on
line source

/*
 * Commands for manipulating the experimental TCH rerouting feature
 * of FreeCalypso GSM firmware
 */

#include <sys/types.h>
#include <stdio.h>
#include <string.h>
#include <strings.h>
#include <stdlib.h>
#include "pktmux.h"
#include "limits.h"
#include "tch_feature.h"
#include "exitcodes.h"

extern u_char rvi_msg[];
extern int rvi_msg_len;

static int tch_rawdump_mode;

send_tch_config_req(config)
{
	u_char sendpkt[3];

	sendpkt[0] = RVT_TCH_HEADER;
	sendpkt[1] = TCH_CONFIG_REQ;
	sendpkt[2] = config;
	/* send it! */
	send_pkt_to_target(sendpkt, 3);
	return(0);
}

cmd_tchdl_common(argc, argv)
	char **argv;
{
	int config;

	if (!strcmp(argv[0], "enable") || !strcmp(argv[0], "on") ||
	    !strcmp(argv[0], "1"))
		config = 1;
	else if (!strcmp(argv[0], "disable") || !strcmp(argv[0], "off") ||
		 !strcmp(argv[0], "0"))
		config = 0;
	else {
		printf("error: boolean argument required\n");
		return(ERROR_USAGE);
	}
	return send_tch_config_req(config);
}

void
cmd_tchdl_interactive(argstr)
	char *argstr;
{
	char *argv[2];
	int argc, rc;

	rc = parse_interactive_command_into_argv(argstr, argv, 1, 1, &argc);
	if (rc < 0)
		return;
	tch_rx_control(1);
	cmd_tchdl_common(argc, argv);
}

cmd_tchdl_oneshot(argc, argv)
	char **argv;
{
	return cmd_tchdl_common(argc - 1, argv + 1);
}

static void
tch_rawdump()
{
	char buf[MAX_PKT_FROM_TARGET*3+5], *dp;
	u_char *cp, *endp;

	cp = rvi_msg + 2;
	endp = rvi_msg + rvi_msg_len;
	strcpy(buf, "TCH:");
	dp = buf + 4;
	while (cp < endp) {
		sprintf(dp, " %02X", *cp++);
		dp += 3;
	}
	*dp = '\0';
	async_msg_output(buf);
}

void
tch_packet_rx()
{
	char buf[128];

	if (tch_rawdump_mode) {
		tch_rawdump();
		return;
	}
	if (rvi_msg_len < 3) {
inv:		async_msg_output("Error: invalid TCH packet received");
		return;
	}
	switch (rvi_msg[2]) {
	case TCH_CONFIG_CONF:
		if (rvi_msg_len != 4)
			goto inv;
		if (rvi_msg[3] & 0xFE)
			goto inv;
		sprintf(buf, "TCH_CONFIG_CONF: DL forwarding is %s",
			rvi_msg[3] ? "enabled" : "disabled");
		async_msg_output(buf);
		return;
	case TCH_ULBITS_CONF:
		if (rvi_msg_len != 3)
			goto inv;
		tch_ulbits_conf();
		return;
	case TCH_DLBITS_IND:
		if (rvi_msg_len != 43)
			goto inv;
		tch_dlbits_handler();
		return;
	default:
		goto inv;
	}
}

static void
cmd_tch_dumpraw(argc, argv)
	char **argv;
{
	if (argc < 2) {
		printf("error: too few arguments\n");
		return;
	}
	if (!strcmp(argv[1], "enable") || !strcmp(argv[1], "on") ||
	    !strcmp(argv[1], "1"))
		tch_rawdump_mode = 1;
	else if (!strcmp(argv[1], "disable") || !strcmp(argv[1], "off") ||
		 !strcmp(argv[1], "0"))
		tch_rawdump_mode = 0;
	else
		printf("error: boolean argument required\n");
}

static void
cmd_tch_status(argc, argv)
	char **argv;
{
	if (argc > 1) {
		printf("error: too many arguments\n");
		return;
	}
	show_tch_record_status();
	show_tch_play_status();
	printf("TCH raw dump mode is %s\n",
		tch_rawdump_mode ? "enabled" : "disabled");
}

void
cmd_tch_dispatch(argstr)
	char *argstr;
{
	char *argv[3];
	int argc, rc;

	rc = parse_interactive_command_into_argv(argstr, argv, 1, 2, &argc);
	if (rc < 0)
		return;
	if (!strcmp(argv[0], "dump-raw")) {
		cmd_tch_dumpraw(argc, argv);
		return;
	}
	if (!strcmp(argv[0], "play")) {
		cmd_tch_play(argc, argv);
		return;
	}
	if (!strcmp(argv[0], "record")) {
		cmd_tch_record(argc, argv);
		return;
	}
	if (!strcmp(argv[0], "status")) {
		cmd_tch_status(argc, argv);
		return;
	}
	printf("error: invalid tch subcommand\n");
}