FreeCalypso > hg > freecalypso-tools

view loadtools/old/CHANGES @ 1012:11391cb6bdc0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
patch from fixeria: doc change from SE K2x0 to K2xx Since their discovery in late 2022, Sony Ericsson K200 and K220 phones were collectively referred to as SE K2x0 in FreeCalypso documentation. However, now that SE K205 has been discovered as yet another member of the same family (same PCBA in different case), it makes more sense to refer to the whole family as SE K2xx.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 23 Sep 2024 12:23:20 +0000
parents 62a91abc0300
children
line wrap: on
line source

Changes from loadtools-r2 to fc-host-tools-r3:

* Implemented support for Mot C1xx (Compal) targets in addition to the
  previously supported Openmoko and Pirelli.  Compal phones have different
  flash, require a different procedure for gaining code download access, and
  have additional bricking concerns.

* Updated loadagent includes Intel flash support and ABB commands needed for
  Compal phones.

* The range of IRAM addresses used by loadagent changed to allow gsm-fw
  ramImage builds (chain-loaded with fc-xram) to load their IRAM code section
  directly into place.

* Loadtool's flash program-bin command now automatically performs a CRC-32
  verification after programming.

* Miscellaneous minor polish.

Changes from loadtools-r1 to loadtools-r2:

* A flash ID check has been implemented in fc-loadtool, invoked automatically
  before doing any erase or program operations, or explicitly at any time with
  the flash info command.  This check ensures that the type of flash chip in
  the target GSM device is the same as what loadtool thinks it is, based on the
  hardware parameters file.

* fc-xram command line syntax changed slightly in order to support immediate
  passing of the serial line to rvinterf/rvtdump.

* Miscellaneous minor polish.