view loadtools/chainload.c @ 1012:11391cb6bdc0

patch from fixeria: doc change from SE K2x0 to K2xx Since their discovery in late 2022, Sony Ericsson K200 and K220 phones were collectively referred to as SE K2x0 in FreeCalypso documentation. However, now that SE K205 has been discovered as yet another member of the same family (same PCBA in different case), it makes more sense to refer to the whole family as SE K2xx.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 23 Sep 2024 12:23:20 +0000
parents 185c9bf208d3
children
line wrap: on
line source

/*
 * This module implements the chain-loading of XRAM images via loadagent.
 */

#include <sys/types.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <strings.h>
#include <time.h>
#include <unistd.h>
#include "../libserial/baudrate.h"
#include "discontig.h"
#include "srecreader.h"

extern int target_fd;

struct srecreader xramimage;

extern struct baudrate *current_baud_rate;
extern struct baudrate *xram_run_baudrate;
extern int xram_jtag_mode;
extern uint32_t crc32_table[];

perform_chain_load()
{
	int rc, reclen, too_many_regions;
	unsigned long rec_count;
	struct discontig_prog regions[MAX_SREC_REGIONS], *regp;
	unsigned regcount, reg;
	char *argv[3], jumparg[10];
	u_char scratch[3], expect_conf[3];
	time_t start_time, finish_time;
	unsigned duration, mm, ss;
	u_long crc_from_target;
	int i, c;

	if (open_srec_file(&xramimage) < 0)
		exit(1);
	/* enter binary RAM download mode */
	argv[0] = "BINML";
	argv[1] = 0;
	tpinterf_make_cmd(argv);
	if (tpinterf_send_cmd())
		exit(1);
	/* read and send S-record image */
	expect_conf[0] = 0x06;
	regp = regions;
	regcount = 0;
	too_many_regions = 0;
	for (rec_count = 0; ; ) {
		if (read_s_record(&xramimage) < 0)
			exit(1);
		switch (xramimage.record_type) {
		case '0':
			if (xramimage.lineno == 1)
				continue;
			fprintf(stderr,
		"%s: S0 record found in line %d (expected in line 1 only)\n",
				xramimage.filename, xramimage.lineno);
			exit(1);
		case '3':
		case '7':
			if (s3s7_get_addr_data(&xramimage) < 0)
				exit(1);
			break;
		default:
			fprintf(stderr,
				"%s line %d: S%c record type not supported\n",
				xramimage.filename, xramimage.lineno,
				xramimage.record_type);
			exit(1);
		}
		if (xramimage.record_type == '7')
			break;
		/* must be S3 */
		if (xramimage.datalen < 1) {
			fprintf(stderr,
				"%s line %d: S3 record has zero data length\n",
				xramimage.filename, xramimage.lineno);
			exit(1);
		}
		if (!rec_count) {
			printf("Each \'.\' is %d S-records\n",
				current_baud_rate->xram_records);
			time(&start_time);
		}
		reclen = xramimage.datalen + 6;
		if (write(target_fd, xramimage.record, reclen) != reclen) {
			perror("binary write to target");
			exit(1);
		}
		rec_count++;
		/* discontiguous regions and CRC-32 accumulation */
		if (!regcount) {
			regp->start = xramimage.addr;
			regp->end = xramimage.addr;
			regp->crc = 0xFFFFFFFF;
			regcount = 1;
		}
		if (xramimage.addr != regp->end) {
			if (regcount >= MAX_SREC_REGIONS)
				too_many_regions = 1;
			else {
				regp++;
				regcount++;
				regp->start = xramimage.addr;
				regp->end = xramimage.addr;
				regp->crc = 0xFFFFFFFF;
			}
		}
		if (!too_many_regions) {
			for (i = 0; i < xramimage.datalen; i++) {
				c = xramimage.record[i+5];
				regp->crc = crc32_table[regp->crc & 0xFF ^ c]
					^ (regp->crc >> 8);
			}
			regp->end += xramimage.datalen;
		}
		/* target sync and progress indication */
		if (rec_count % current_baud_rate->xram_records == 0) {
			scratch[0] = 0x05;	/* ENQ */
			write(target_fd, scratch, 1);
			if (collect_binblock_from_target(scratch, 3, 1))
				exit(1);
			expect_conf[1] = rec_count >> 8;
			expect_conf[2] = rec_count;
			if (bcmp(scratch, expect_conf, 3)) {
				fprintf(stderr,
					"error: expected sync mismatch\n");
				exit(1);
			}
			putchar('.');
			fflush(stdout);
		}
	}
	/* got S7 */
	fclose(xramimage.openfile);
	if (!rec_count) {
		fprintf(stderr,
		"%s line %d: S7 without any preceding S3 data records\n",
			xramimage.filename, xramimage.lineno);
		exit(1);
	}
	putchar('\n');	/* newline after the dots */
	scratch[0] = 0x04;	/* EOT */
	write(target_fd, scratch, 1);
	if (collect_binblock_from_target(scratch, 1, 1))
		exit(1);
	time(&finish_time);
	if (scratch[0] != '=') {
		fprintf(stderr, "error: \'=\' not received as expected\n");
		exit(1);
	}
	duration = finish_time - start_time;
	mm = duration / 60;
	ss = duration - mm * 60;
	printf("XRAM image transferred in %um%02us\n", mm, ss);
	printf("Verifying CRC-32 of %u downloaded region(s)\n", regcount);
	for (reg = 0, regp = regions; reg < regcount; reg++, regp++) {
		rc = crc32_on_target((u_long) regp->start,
				     (u_long) (regp->end - regp->start),
				     &crc_from_target);
		if (rc < 0)
			exit(1);
		if (crc_from_target != regp->crc) {
			fprintf(stderr, "error: CRC mismatch!\n");
			exit(1);
		}
		putchar('.');
		fflush(stdout);
	}
	putchar('\n');
	if (xram_run_baudrate != current_baud_rate) {
		rc = loadagent_switch_baud(xram_run_baudrate);
		if (rc)
			exit(1);
	}
	if (xram_jtag_mode) {
		printf(
      "Leaving target in loadagent for JTAG; image start address is 0x%08lX\n",
			(u_long) xramimage.addr);
		exit(0);
	}
	printf("Sending jump command\n");
	sprintf(jumparg, "%lX", (u_long) xramimage.addr);
	argv[0] = "jump";
	argv[1] = jumparg;
	argv[2] = 0;
	tpinterf_make_cmd(argv);
	if (tpinterf_send_cmd())
		exit(1);
	printf("Sent \"%s %s\": XRAM image should now be running!\n",
		argv[0], argv[1]);
	return(0);
}