# The following parameters go into the <p command sent to the boot ROM
pll-config 4/1		# 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz
rhea-cntl 0x00		# good for all Calypso platforms

# The remaining settings are carried out via loadagent commands
init-script basic-4ws-8mb.init

# This module has a single-bank 8 MiB flash chip on nCS0,
# using the usual 0x03000000 mapping like on other targets
flash single-8M 0x03000000

# Perform a Iota poweroff when we are done
exit-mode iota-off