diff loadtools/scripts/compal.init @ 0:e7502631a0f9

initial import from freecalypso-sw rev 1033:5ab737ac3ad7
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 11 Jun 2016 00:13:35 +0000
parents
children ac48ed111d6a
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/loadtools/scripts/compal.init	Sat Jun 11 00:13:35 2016 +0000
@@ -0,0 +1,16 @@
+# Set WS=3 for both nCS0 and nCS1.  This configuration is used by OsmocomBB
+# for all 3 Compal models (E86/88/99), and is also seen in the IDA disassembly
+# listing of c115-1.0.46.E firmware contributed by Christophe Devine.
+
+w16 fffffb00 00A3
+w16 fffffb02 00A3
+
+# We need to set the FFFF:FB10 register to map the flash (not the boot ROM)
+# to address 0.  We need this mapping in order to be able to dump and program
+# the entire flash, as for some reason the alternate nCS0 mapping at 0x03000000
+# does not work on Compal phones.  (That alternate mapping works fine on
+# Openmoko and Pirelli phones, though.  Perhaps the different Calypso chip
+# version is the culprit, or perhaps this alternate mapping works only if the
+# physical nIBOOT pin is low.)
+
+w16 fffffb10 0300