--- a/loadtools/scripts/c155.config	Tue May 28 07:20:14 2019 +0000
+++ b/loadtools/scripts/c155.config	Tue May 28 07:42:39 2019 +0000
@@ -1,5 +1,5 @@
 # This configuration is for Motorola C155/156 phones.  Use the "generic"
-# compal configuration for C11x/123 and C139/140.
+# compal configuration for C11x/12x and C139/140.
 
 compal-stage thumb
 
@@ -12,14 +12,8 @@
 # The remaining settings are carried out via loadagent commands
 init-script c155.init
 
-# 8 MiB flash, accessible at 0x03000000 without the strange issue
-# seen on the lower C1xx models, but the flash chip turns out to have
-# partition quirks like the one on the D-Sample, so we need to
-# tell fc-loadtool about it explicitly instead of using CFI.
-# The actual chip in these phones is a flash+RAM MCP, but the flash part
-# is exactly the same as the 28F640W30B on the D-Sample (same geometry,
-# same ID codes), so we just tell fc-loadtool that it's a 28F640W30B.
-flash 28f640w30b 0x03000000
+# 8 MiB flash, accessible at 0x03000000 without any problems
+flash single-8M 0x03000000
 
 # bottom boot flash, sector 0 is only 8 KiB
 boot-reflash-hack 0x820000 0x2000