FreeCalypso > hg > freecalypso-tools
comparison loadtools/scripts/fcfam.config @ 0:e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 11 Jun 2016 00:13:35 +0000 |
| parents | |
| children | 49ee210fc4fb |
comparison
equal
deleted
inserted
replaced
| -1:000000000000 | 0:e7502631a0f9 |
|---|---|
| 1 # This loadtool target configuration is intended to be applicable to all | |
| 2 # original hardware designs created within the FreeCalypso project, | |
| 3 # starting with FCDEV3B. Specifically, it should fit all targets that | |
| 4 # satisfy the following criteria: | |
| 5 # | |
| 6 # The DBB chip is Calypso C035 | |
| 7 # The RF block is Rita (26 MHz VCXO) | |
| 8 # Spansion S71PL129NC0 used for flash and XRAM, copied from Pirelli DP-L10 | |
| 9 # The 2nd flash chip select is wired to nCS2 | |
| 10 | |
| 11 # The following parameters go into the <p command sent to the boot ROM | |
| 12 pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz | |
| 13 rhea-cntl 0x00 # good for all Calypso platforms | |
| 14 | |
| 15 # The remaining settings are carried out via loadagent commands | |
| 16 init-script cs2-4ws-8mb.init | |
| 17 | |
| 18 # Flash type and chip select base addresses | |
| 19 flash pl129n 0x03000000 0x01800000 | |
| 20 | |
| 21 # Perform a Iota poweroff when we are done | |
| 22 exit-mode iota-off |